/*
* Device Tree Source for AMCC Kilauea (405EX)
*
* Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,kilauea";
compatible = "amcc,kilauea";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
ethernet1 = &EMAC1;
serial0 = &UART0;
serial1 = &UART1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EX";
reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <16384>; /* 16 kB */
d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405ex", "ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
CPM0: cpm {
compatible = "ibm,cpm";
dcr-access-method = "native";
dcr-reg = <0x0b0 0x003>;
unused-units = <0x00000000>;
idle-doze = <0x02000000>;
standby = <0xe3e74800>;
};
plb {
compatible = "ibm,plb-405ex", "ibm,plb4";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: memory-controller {
compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
dcr-reg = <0x010 0x002>;
interrupt-parent = <&UIC2>;
interrupts = <0x5 0x4 /* ECC DED Error */
0x6 0x4>; /* ECC SEC Error */
};
CRYPTO: crypto@ef700000 {
compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
reg = <0xef700000 0x80400>;
interrupt-parent = <&UIC0>;
interrupts = <0x17 0x2>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
/*RXEOB*/ 0x1 &UIC0 0xb 0x4
/*SERR*/ 0x2 &UIC1 0x0 0x4
/*TXDE*/ 0x3 &UIC1 0x1 0x4
/*RXDE*/ 0x4 &UIC1 0x2 0x4>;
interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x80000000 0x80000000 0x10000000
0xef600000 0xef600000 0x00a00000
0xf0000000 0xf0000000 0x10000000>;
dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405ex", "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "root";
reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
reg = <0x03fa0000 0x00060000>;
};
};
ndfc@1,0 {
compatible = "ibm,ndfc";
reg = <0x00000001 0x00000000 0x00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
#address-cells = <1>;
#size-cells = <1>;
nand {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
};
partition@100000 {
label = "user";
reg = <0x00000000 0x03f00000>;
};
};
};
};
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600200 0x00000008>;
virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600300 0x00000008>;
virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405ex", "ibm,iic";
reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "dallas,ds1338";
reg = <0x68>;
};
dtt@48 {
compatible = "dallas,ds1775";
reg = <0x48>;
};
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405ex", "ibm,iic";
reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4sync";
interrupt-parent = <&EMAC0>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
/*Wake*/ 0x1 &UIC1 0x1d 0x4>;
reg = <0xef600900 0x000000c4>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
rx-fifo-size-gige = <16384>;
tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
EMAC1: ethernet@ef600a00 {
linux,network-index = <0x1>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4sync";
interrupt-parent = <&EMAC1>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
/*Wake*/ 0x1 &UIC1 0x1f 0x4>;
reg = <0xef600a00 0x000000c4>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
rx-fifo-size-gige = <16384>;
tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
};
PCIE0: pcie@a0000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0xa0000000 0x20000000 /* Config space access */
0xef000000 0x00001000>; /* Registers */
dcr-reg = <0x040 0x020>;
sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pcie@c0000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0xc0000000 0x20000000 /* Config space access */
0xef001000 0x00001000>; /* Registers */
dcr-reg = <0x060 0x020>;
sdr-base = <0x440>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x40 to 0x7f */
bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
};
};
};