Kernel driver inspur-ipsps1 =========================== Supported chips: * Inspur Power System power supply unit Author: John Wang <wangzqbj@inspur.com> Description ----------- This driver supports Inspur Power System power supplies. This driver is a client to the core PMBus driver. Usage Notes ----------- This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for details. Sysfs entries ------------- The following attributes are supported: ======================= ====================================================== curr1_input Measured input current curr1_label "iin" curr1_max Maximum current curr1_max_alarm Current high alarm curr2_input Measured output current in mA. curr2_label "iout1" curr2_crit Critical maximum current curr2_crit_alarm Current critical high alarm curr2_max Maximum current curr2_max_alarm Current high alarm fan1_alarm Fan 1 warning. fan1_fault Fan 1 fault. fan1_input Fan 1 speed in RPM. in1_alarm Input voltage under-voltage alarm. in1_input Measured input voltage in mV. in1_label "vin" in2_input Measured output voltage in mV. in2_label "vout1" in2_lcrit Critical minimum output voltage in2_lcrit_alarm Output voltage critical low alarm in2_max Maximum output voltage in2_max_alarm Output voltage high alarm in2_min Minimum output voltage in2_min_alarm Output voltage low alarm power1_alarm Input fault or alarm. power1_input Measured input power in uW. power1_label "pin" power1_max Input power limit power2_max_alarm Output power high alarm power2_max Output power limit power2_input Measured output power in uW. power2_label "pout" temp[1-3]_input Measured temperature temp[1-2]_max Maximum temperature temp[1-3]_max_alarm Temperature high alarm vendor Manufacturer name model Product model part_number Product part number serial_number Product serial number fw_version Firmware version hw_version Hardware version mode Work mode. Can be set to active or standby, when set to standby, PSU will automatically switch between standby and redundancy mode. ======================= ======================================================