#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Miscellaneous Intel PT testing (exclusive)

set -e

# Skip if no Intel PT
perf list pmu | grep -q 'intel_pt//' || exit 2

shelldir=$(dirname "$0")
. "${shelldir}"/lib/waiting.sh

skip_cnt=0
ok_cnt=0
err_cnt=0

temp_dir=$(mktemp -d /tmp/perf-test-intel-pt-sh.XXXXXXXXXX)

tmpfile="${temp_dir}/tmp-perf.data"
perfdatafile="${temp_dir}/test-perf.data"
outfile="${temp_dir}/test-out.txt"
errfile="${temp_dir}/test-err.txt"
awkscript="${temp_dir}/awkscript"

cleanup()
{
	trap - EXIT TERM INT
	sane=$(echo "${temp_dir}" | cut -b 1-26)
	if [ "${sane}" = "/tmp/perf-test-intel-pt-sh" ] ; then
		echo "--- Cleaning up ---"
		rm -f "${temp_dir}/"*
		rmdir "${temp_dir}"
	fi
}

trap_cleanup()
{
	cleanup
	exit 1
}

trap trap_cleanup EXIT TERM INT

# perf record for testing without decoding
perf_record_no_decode()
{
	# Options to speed up recording: no post-processing, no build-id cache update,
	# and no BPF events.
	perf record -B -N --no-bpf-event "$@"
}

# perf record for testing should not need BPF events
perf_record_no_bpf()
{
	# Options for no BPF events
	perf record --no-bpf-event "$@"
}

can_cpu_wide()
{
	echo "Checking for CPU-wide recording on CPU $1"
	if ! perf_record_no_decode -o "${tmpfile}" -e dummy:u -C "$1" true >/dev/null 2>&1 ; then
		echo "No so skipping"
		return 2
	fi
	echo OK
	return 0
}

test_system_wide_side_band()
{
	echo "--- Test system-wide sideband ---"

	# Need CPU 0 and CPU 1
	can_cpu_wide 0 || return $?
	can_cpu_wide 1 || return $?

	# Record on CPU 0 a task running on CPU 1
	perf_record_no_decode -o "${perfdatafile}" -e intel_pt//u -C 0 -- taskset --cpu-list 1 uname

	# Should get MMAP events from CPU 1 because they can be needed to decode
	mmap_cnt=$(perf script -i "${perfdatafile}" --no-itrace --show-mmap-events -C 1 2>/dev/null | grep -c MMAP)

	if [ "${mmap_cnt}" -gt 0 ] ; then
		echo OK
		return 0
	fi

	echo "Failed to record MMAP events on CPU 1 when tracing CPU 0"
	return 1
}

can_kernel()
{
	if [ -z "${can_kernel_trace}" ] ; then
		can_kernel_trace=0
		perf_record_no_decode -o "${tmpfile}" -e dummy:k true >/dev/null 2>&1 && can_kernel_trace=1
	fi
	if [ ${can_kernel_trace} -eq 0 ] ; then
		echo "SKIP: no kernel tracing"
		return 2
	fi
	return 0
}

test_per_thread()
{
	k="$1"
	desc="$2"

	echo "--- Test per-thread ${desc}recording ---"

	if [ "${k}" = "k" ] ; then
		can_kernel || return 2
	fi

	cat <<- "_end_of_file_" > "${awkscript}"
	BEGIN {
		s = "[ ]*"
		u = s"[0-9]+"s
		d = s"[0-9-]+"s
		x = s"[0-9a-fA-FxX]+"s
		mmapping = "idx"u": mmapping fd"u
		set_output = "idx"u": set output fd"u"->"u
		perf_event_open = "sys_perf_event_open: pid"d"cpu"d"group_fd"d"flags"x"="u
	}

	/perf record opening and mmapping events/ {
		if (!done)
			active = 1
	}

	/perf record done opening and mmapping events/ {
		active = 0
		done = 1
	}

	$0 ~ perf_event_open && active {
		match($0, perf_event_open)
		$0 = substr($0, RSTART, RLENGTH)
		pid = $3
		cpu = $5
		fd = $11
		print "pid " pid " cpu " cpu " fd " fd " : " $0
		fd_array[fd] = fd
		pid_array[fd] = pid
		cpu_array[fd] = cpu
	}

	$0 ~ mmapping && active  {
		match($0, mmapping)
		$0 = substr($0, RSTART, RLENGTH)
		fd = $5
		print "fd " fd " : " $0
		if (fd in fd_array) {
			mmap_array[fd] = 1
		} else {
			print "Unknown fd " fd
			exit 1
		}
	}

	$0 ~ set_output && active {
		match($0, set_output)
		$0 = substr($0, RSTART, RLENGTH)
		fd = $6
		fd_to = $8
		print "fd " fd " fd_to " fd_to " : " $0
		if (fd in fd_array) {
			if (fd_to in fd_array) {
				set_output_array[fd] = fd_to
			} else {
				print "Unknown fd " fd_to
				exit 1
			}
		} else {
			print "Unknown fd " fd
			exit 1
		}
	}

	END {
		print "Checking " length(fd_array) " fds"
		for (fd in fd_array) {
			if (fd in mmap_array) {
				pid = pid_array[fd]
				if (pid != -1) {
					if (pid in pids) {
						print "More than 1 mmap for PID " pid
						exit 1
					}
					pids[pid] = 1
				}
				cpu = cpu_array[fd]
				if (cpu != -1) {
					if (cpu in cpus) {
						print "More than 1 mmap for CPU " cpu
						exit 1
					}
					cpus[cpu] = 1
				}
			} else if (!(fd in set_output_array)) {
				print "No mmap for fd " fd
				exit 1
			}
		}
		n = length(pids)
		if (n != thread_cnt) {
			print "Expected " thread_cnt " per-thread mmaps - found " n
			exit 1
		}
	}
	_end_of_file_

	perf test -w thloop 30 2 &
	w1=$!
	perf test -w thloop 30 2 &
	w2=$!
	echo "Workload PIDs are $w1 and $w2"
	wait_for_threads ${w1} 2
	wait_for_threads ${w2} 2

	perf_record_no_decode -o "${perfdatafile}" -e intel_pt//u"${k}" -vvv --per-thread -p "${w1},${w2}" 2>"${errfile}" >"${outfile}" &
	ppid=$!
	echo "perf PID is $ppid"
	wait_for_perf_to_start ${ppid} "${errfile}" || return 1

	kill ${w1}
	wait_for_process_to_exit ${w1} || return 1
	is_running ${ppid} || return 1

	kill ${w2}
	wait_for_process_to_exit ${w2} || return 1
	wait_for_process_to_exit ${ppid} || return 1

	awk -v thread_cnt=4 -f "${awkscript}" "${errfile}" || return 1

	echo OK
	return 0
}

test_jitdump()
{
	echo "--- Test tracing self-modifying code that uses jitdump ---"

        if ! perf check feature -q libelf ; then
		echo "SKIP: libelf is needed for jitdump"
		return 2
	fi

	# Change to temp_dir so jitdump collateral files go there
	cd "${temp_dir}"
	perf_record_no_bpf -o "${tmpfile}" -e intel_pt//u perf test -w jitdump
	perf inject -i "${tmpfile}" -o "${perfdatafile}" --jit
	decode_br_cnt=$(perf script -i "${perfdatafile}" --itrace=b | wc -l)
	# Note that overflow and lost errors are suppressed for the error count
	decode_err_cnt=$(perf script -i "${perfdatafile}" --itrace=e-o-l | grep -ci error)
	cd -
	# Should be thousands of branches
	if [ "${decode_br_cnt}" -lt 1000 ] ; then
		echo "Decode failed, only ${decode_br_cnt} branches"
		return 1
	fi
	# Should be no errors
	if [ "${decode_err_cnt}" -ne 0 ] ; then
		echo "Decode failed, ${decode_err_cnt} errors"
		perf script -i "${perfdatafile}" --itrace=e-o-l --show-mmap-events | cat
		return 1
	fi

	echo OK
	return 0
}

test_packet_filter()
{
	echo "--- Test with MTC and TSC disabled ---"
	# Disable MTC and TSC
	perf_record_no_decode -o "${perfdatafile}" -e intel_pt/mtc=0,tsc=0/u uname
	# Should not get MTC packet
	mtc_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "MTC 0x")
	if [ "${mtc_cnt}" -ne 0 ] ; then
		echo "Failed to filter with mtc=0"
		return 1
	fi
	# Should not get TSC package
	tsc_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "TSC 0x")
	if [ "${tsc_cnt}" -ne 0 ] ; then
		echo "Failed to filter with tsc=0"
		return 1
	fi
	echo OK
	return 0
}

test_disable_branch()
{
	echo "--- Test with branches disabled ---"
	# Disable branch
	perf_record_no_decode -o "${perfdatafile}" -e intel_pt/branch=0/u uname
	# Should not get branch related packets
	tnt_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "TNT 0x")
	tip_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "TIP 0x")
	fup_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "FUP 0x")
	if [ "${tnt_cnt}" -ne 0 ] || [ "${tip_cnt}" -ne 0 ] || [ "${fup_cnt}" -ne 0 ] ; then
		echo "Failed to disable branches"
		return 1
	fi
	echo OK
	return 0
}

test_time_cyc()
{
	echo "--- Test with/without CYC ---"
	# Check if CYC is supported
	cyc=$(cat /sys/bus/event_source/devices/intel_pt/caps/psb_cyc)
	if [ "${cyc}" != "1" ] ; then
		echo "SKIP: CYC is not supported"
		return 2
	fi
	# Enable CYC
	perf_record_no_decode -o "${perfdatafile}" -e intel_pt/cyc/u uname
	# should get CYC packets
	cyc_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "CYC 0x")
	if [ "${cyc_cnt}" = "0" ] ; then
		echo "Failed to get CYC packet"
		return 1
	fi
	# Without CYC
	perf_record_no_decode -o "${perfdatafile}" -e intel_pt//u uname
	# Should not get CYC packets
	cyc_cnt=$(perf script -i "${perfdatafile}" -D 2>/dev/null | grep -c "CYC 0x")
	if [ "${cyc_cnt}" -gt 0 ] ; then
		echo "Still get CYC packet without cyc"
		return 1
	fi
	echo OK
	return 0
}

test_sample()
{
	echo "--- Test recording with sample mode ---"
	# Check if recording with sample mode is working
	if ! perf_record_no_decode -o "${perfdatafile}" --aux-sample=8192 -e '{intel_pt//u,branch-misses:u}' uname ; then
		echo "perf record failed with --aux-sample"
		return 1
	fi
	# Check with event with PMU name
	if perf_record_no_decode -o "${perfdatafile}" -e br_misp_retired.all_branches:u uname ; then
		if ! perf_record_no_decode -o "${perfdatafile}" -e '{intel_pt//,br_misp_retired.all_branches/aux-sample-size=8192/}:u' uname ; then
			echo "perf record failed with --aux-sample-size"
			return 1
		fi
	fi
	echo OK
	return 0
}

test_kernel_trace()
{
	echo "--- Test with kernel trace ---"
	# Check if recording with kernel trace is working
	can_kernel || return 2
	if ! perf_record_no_decode -o "${perfdatafile}" -e intel_pt//k -m1,128 uname ; then
		echo "perf record failed with intel_pt//k"
		return 1
	fi
	echo OK
	return 0
}

test_virtual_lbr()
{
	echo "--- Test virtual LBR ---"
	# Run setup_python.sh in a subshell first so its 'exit 2' when Python is
	# not detected skips only this subtest rather than exiting test_intel_pt.sh
	# (which would trigger trap_cleanup and fail the suite).
	# shellcheck source=lib/setup_python.sh
	if ! ( . "${shelldir}"/lib/setup_python.sh ) ; then
		return 2
	fi
	# shellcheck source=lib/setup_python.sh
	. "${shelldir}"/lib/setup_python.sh

	if ! "$PYTHON" -c 'import perf' > /dev/null 2>&1; then
		echo "SKIP: Python perf module not found"
		return 2
	fi

	# Check if virtual lbr is working
	perf_record_no_bpf -o "${tmpfile}" --aux-sample \
		-e '{intel_pt//,cycles}:u' perf test -w brstack || return 1
	perf inject --itrace=L -i "${tmpfile}" -o "${perfdatafile}" || return 1
	output=$("$PYTHON" "${shelldir}/lib/perf_brstack_max.py" -i "${perfdatafile}") || return 1
	echo "Debug: perf_brstack_max.py output: $output"
	times_val=$(echo "$output" | grep "max brstack " | cut -d " " -f 3)
	case "${times_val}" in
		[0-9]*)	;;
		*)	times_val=0;;
	esac
	if [ "${times_val}" -lt 2 ] ; then
		echo "Failed with virtual lbr"
		return 1
	fi
	echo OK
	return 0
}

test_power_event()
{
	echo "--- Test power events ---"
	# Check if power events are supported
	power_event=$(cat /sys/bus/event_source/devices/intel_pt/caps/power_event_trace)
	if [ "${power_event}" != "1" ] ; then
		echo "SKIP: power_event_trace is not supported"
		return 2
	fi
	if ! perf_record_no_decode -o "${perfdatafile}" -a -e intel_pt/pwr_evt/u uname ; then
		echo "perf record failed with pwr_evt"
		return 1
	fi
	echo OK
	return 0
}

test_no_tnt()
{
	echo "--- Test with TNT packets disabled  ---"
	# Check if TNT disable is supported
	notnt=$(cat /sys/bus/event_source/devices/intel_pt/caps/tnt_disable)
	if [ "${notnt}" != "1" ] ; then
		echo "SKIP: tnt_disable is not supported"
		return 2
	fi
	perf_record_no_decode -o "${perfdatafile}" -e intel_pt/notnt/u uname
	# Should be no TNT packets
	tnt_cnt=$(perf script -i "${perfdatafile}" -D | grep -c TNT)
	if [ "${tnt_cnt}" -ne 0 ] ; then
		echo "TNT packets still there after notnt"
		return 1
	fi
	echo OK
	return 0
}

test_event_trace()
{
	echo "--- Test with event_trace ---"
	# Check if event_trace is supported
	event_trace=$(cat /sys/bus/event_source/devices/intel_pt/caps/event_trace)
	if [ "${event_trace}" != 1 ] ; then
		echo "SKIP: event_trace is not supported"
		return 2
	fi
	if ! perf_record_no_decode -o "${perfdatafile}" -e intel_pt/event/u uname ; then
		echo "perf record failed with event trace"
		return 1
	fi
	echo OK
	return 0
}

test_pipe()
{
	echo "--- Test with pipe mode ---"
	# Check if it works with pipe
	if ! perf_record_no_bpf -o- -e intel_pt//u uname | perf report -q -i- --itrace=i10000 ; then
		echo "perf record + report failed with pipe mode"
		return 1
	fi
	if ! perf_record_no_bpf -o- -e intel_pt//u uname | perf inject -b > /dev/null ; then
		echo "perf record + inject failed with pipe mode"
		return 1
	fi
	echo OK
	return 0
}

test_pause_resume()
{
	echo "--- Test with pause / resume ---"
	if ! perf_record_no_decode -o "${perfdatafile}" -e intel_pt/aux-action=start-paused/u uname ; then
		echo "SKIP: pause / resume is not supported"
		return 2
	fi
	if ! perf_record_no_bpf -o "${perfdatafile}" \
			-e intel_pt/aux-action=start-paused/u \
			-e instructions/period=50000,aux-action=resume,name=Resume/u \
			-e instructions/period=100000,aux-action=pause,name=Pause/u uname  ; then
		echo "perf record with pause / resume failed"
		return 1
	fi
	if ! perf script -i "${perfdatafile}" --itrace=b -Fperiod,event | \
			awk 'BEGIN {paused=1;branches=0}
			     /Resume/ {paused=0}
			     /branches/ {if (paused) exit 1;branches=1}
			     /Pause/ {paused=1}
			     END {if (!branches) exit 1}' ; then
		echo "perf record with pause / resume failed"
		return 1
	fi
	echo OK
	return 0
}

count_result()
{
	if [ "$1" -eq 2 ] ; then
		skip_cnt=$((skip_cnt + 1))
		return
	fi
	if [ "$1" -eq 0 ] ; then
		ok_cnt=$((ok_cnt + 1))
		return
	fi
	err_cnt=$((err_cnt + 1))
}

ret=0
test_system_wide_side_band		|| ret=$? ; count_result $ret ; ret=0
test_per_thread "" ""			|| ret=$? ; count_result $ret ; ret=0
test_per_thread "k" "(incl. kernel) "	|| ret=$? ; count_result $ret ; ret=0
test_jitdump				|| ret=$? ; count_result $ret ; ret=0
test_packet_filter			|| ret=$? ; count_result $ret ; ret=0
test_disable_branch			|| ret=$? ; count_result $ret ; ret=0
test_time_cyc				|| ret=$? ; count_result $ret ; ret=0
test_sample				|| ret=$? ; count_result $ret ; ret=0
test_kernel_trace			|| ret=$? ; count_result $ret ; ret=0
test_virtual_lbr			|| ret=$? ; count_result $ret ; ret=0
test_power_event			|| ret=$? ; count_result $ret ; ret=0
test_no_tnt				|| ret=$? ; count_result $ret ; ret=0
test_event_trace			|| ret=$? ; count_result $ret ; ret=0
test_pipe				|| ret=$? ; count_result $ret ; ret=0
test_pause_resume			|| ret=$? ; count_result $ret ; ret=0

cleanup

echo "--- Done ---"

if [ ${err_cnt} -gt 0 ] ; then
	exit 1
fi

if [ ${ok_cnt} -gt 0 ] ; then
	exit 0
fi

exit 2