Directory Files
.. 30
File Size
.amd_axi_w1.ko.cmd 307 B
.amd_axi_w1.mod.cmd 165 B
.amd_axi_w1.mod.o.cmd 50 kB
.amd_axi_w1.o.cmd 54 kB
.ds2482.ko.cmd 291 B
.ds2482.mod.cmd 153 B
.ds2482.mod.o.cmd 50 kB
.ds2482.o.cmd 64 kB
.ds2490.ko.cmd 291 B
.ds2490.mod.cmd 153 B
.ds2490.mod.o.cmd 50 kB
.ds2490.o.cmd 53 kB
.matrox_w1.ko.cmd 303 B
.matrox_w1.mod.cmd 162 B
.matrox_w1.mod.o.cmd 50 kB
.matrox_w1.o.cmd 58 kB
.modules.order.cmd 422 B
.mxc_w1.ko.cmd 291 B
.mxc_w1.mod.cmd 153 B
.mxc_w1.mod.o.cmd 50 kB
.mxc_w1.o.cmd 53 kB
.omap_hdq.ko.cmd 299 B
.omap_hdq.mod.cmd 159 B
.omap_hdq.mod.o.cmd 50 kB
.omap_hdq.o.cmd 54 kB
.sgi_w1.ko.cmd 291 B
.sgi_w1.mod.cmd 153 B
.sgi_w1.mod.o.cmd 50 kB
.sgi_w1.o.cmd 53 kB
.w1-gpio.ko.cmd 295 B
.w1-gpio.mod.cmd 156 B
.w1-gpio.mod.o.cmd 50 kB
.w1-gpio.o.cmd 52 kB
.w1-uart.ko.cmd 295 B
.w1-uart.mod.cmd 156 B
.w1-uart.mod.o.cmd 50 kB
.w1-uart.o.cmd 53 kB
Kconfig 2.6 kB
Makefile 480 B
amd_axi_w1.c 12 kB
amd_axi_w1.ko 44 kB
amd_axi_w1.mod 32 B
amd_axi_w1.mod.c 547 B
amd_axi_w1.mod.o 3.5 kB
amd_axi_w1.o 44 kB
ds2482.c 16 kB
ds2482.ko 58 kB
ds2482.mod 28 B
ds2482.mod.c 669 B
ds2482.mod.o 3.7 kB
ds2482.o 57 kB
ds2490.c 27 kB
ds2490.ko 125 kB
ds2490.mod 28 B
ds2490.mod.c 522 B
ds2490.mod.o 3.4 kB
ds2490.o 128 kB
matrox_w1.c 4.6 kB
matrox_w1.ko 26 kB
matrox_w1.mod 31 B
matrox_w1.mod.c 511 B
matrox_w1.mod.o 3.4 kB
matrox_w1.o 25 kB
modules.order 263 B
mxc_w1.c 4.3 kB
mxc_w1.ko 26 kB
mxc_w1.mod 28 B
mxc_w1.mod.c 541 B
mxc_w1.mod.o 3.5 kB
mxc_w1.o 25 kB
omap_hdq.c 17 kB
omap_hdq.ko 101 kB
omap_hdq.mod 30 B
omap_hdq.mod.c 613 B
omap_hdq.mod.o 3.6 kB
omap_hdq.o 102 kB
sgi_w1.c 2.7 kB
sgi_w1.ko 18 kB
sgi_w1.mod 28 B
sgi_w1.mod.c 457 B
sgi_w1.mod.o 3.3 kB
sgi_w1.o 16 kB
w1-gpio.c 3.9 kB
w1-gpio.ko 21 kB
w1-gpio.mod 29 B
w1-gpio.mod.c 525 B
w1-gpio.mod.o 3.4 kB
w1-gpio.o 20 kB
w1-uart.c 11 kB
w1-uart.ko 39 kB
w1-uart.mod 29 B
w1-uart.mod.c 532 B
w1-uart.mod.o 3.5 kB
w1-uart.o 38 kB

Linux v7.4-rc3 - masters

# SPDX-License-Identifier: GPL-2.0-only
#
# 1-wire bus master configuration
#

menu "1-wire Bus Masters"

config W1_MASTER_AMD_AXI
	tristate "AMD AXI 1-wire bus host"
	help
	  Say Y here is you want to support the AMD AXI 1-wire IP core.
	  This driver makes use of the programmable logic IP to perform
	  correctly timed 1 wire transactions without relying on GPIO timing
	  through the kernel.

	  This driver can also be built as a module.  If so, the module will be
	  called amd_w1_axi.

config W1_MASTER_MATROX
	tristate "Matrox G400 transport layer for 1-wire"
	depends on PCI
	help
	  Say Y here if you want to communicate with your 1-wire devices
	  using Matrox's G400 GPIO pins.

	  This support is also available as a module.  If so, the module
	  will be called matrox_w1.

config W1_MASTER_DS2490
	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
  	depends on USB
  	help
	  Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
	  for example DS9490*.

  	  This support is also available as a module.  If so, the module
	  will be called ds2490.

config W1_MASTER_DS2482
	tristate "Maxim DS2482 I2C to 1-Wire bridge"
	depends on I2C
	help
	  If you say yes here you get support for the Maxim DS2482
	  I2C to 1-Wire bridge.

	  This driver can also be built as a module.  If so, the module
	  will be called ds2482.

config W1_MASTER_MXC
	tristate "Freescale MXC 1-wire busmaster"
	depends on ARCH_MXC || COMPILE_TEST
	help
	  Say Y here to enable MXC 1-wire host

config W1_MASTER_GPIO
	tristate "GPIO 1-wire busmaster"
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y here if you want to communicate with your 1-wire devices using
	  GPIO pins. This driver uses the GPIO API to control the wire.

	  This support is also available as a module.  If so, the module
	  will be called w1-gpio.

config HDQ_MASTER_OMAP
	tristate "OMAP HDQ driver"
	depends on ARCH_OMAP || COMPILE_TEST
	help
	  Say Y here if you want support for the 1-wire or HDQ Interface
	  on an OMAP processor.

config W1_MASTER_SGI
	tristate "SGI ASIC driver"
	help
	  Say Y here if you want support for your 1-wire devices using
	  SGI ASIC 1-Wire interface

	  This support is also available as a module.  If so, the module
	  will be called sgi_w1.

config W1_MASTER_UART
	tristate "UART 1-wire driver"
	depends on SERIAL_DEV_BUS
	help
	  Say Y here if you want to communicate with your 1-wire devices using
	  UART interface.

	  This support is also available as a module.  If so, the module
	  will be called w1-uart.

endmenu