/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2016 BayLibre, SAS * Author: Neil Armstrong <narmstrong@baylibre.com> * Copyright (C) 2015 Amlogic, Inc. All rights reserved. */ #ifndef __MESON_DW_HDMI_H #define __MESON_DW_HDMI_H /* * Bit 15-10: RW Reserved. Default 1 starting from G12A * Bit 9 RW sw_reset_i2c starting from G12A * Bit 8 RW sw_reset_axiarb starting from G12A * Bit 7 RW Reserved. Default 1, sw_reset_emp starting from G12A * Bit 6 RW Reserved. Default 1, sw_reset_flt starting from G12A * Bit 5 RW Reserved. Default 1, sw_reset_hdcp22 starting from G12A * Bit 4 RW sw_reset_phyif: PHY interface. 1=Apply reset; 0=Release from reset. * Default 1. * Bit 3 RW sw_reset_intr: interrupt module. 1=Apply reset; * 0=Release from reset. * Default 1. * Bit 2 RW sw_reset_mem: KSV/REVOC mem. 1=Apply reset; 0=Release from reset. * Default 1. * Bit 1 RW sw_reset_rnd: random number interface to HDCP. 1=Apply reset; * 0=Release from reset. Default 1. * Bit 0 RW sw_reset_core: connects to IP's ~irstz. 1=Apply reset; * 0=Release from reset. Default 1. */ #define HDMITX_TOP_SW_RESET (0x000) /* * Bit 31 RW free_clk_en: 0=Enable clock gating for power saving; 1= Disable * Bit 12 RW i2s_ws_inv:1=Invert i2s_ws; 0=No invert. Default 0. * Bit 11 RW i2s_clk_inv: 1=Invert i2s_clk; 0=No invert. Default 0. * Bit 10 RW spdif_clk_inv: 1=Invert spdif_clk; 0=No invert. Default 0. * Bit 9 RW tmds_clk_inv: 1=Invert tmds_clk; 0=No invert. Default 0. * Bit 8 RW pixel_clk_inv: 1=Invert pixel_clk; 0=No invert. Default 0. * Bit 7 RW hdcp22_skpclk_en: starting from G12A, 1=enable; 0=disable * Bit 6 RW hdcp22_esmclk_en: starting from G12A, 1=enable; 0=disable * Bit 5 RW hdcp22_tmdsclk_en: starting from G12A, 1=enable; 0=disable * Bit 4 RW cec_clk_en: 1=enable cec_clk; 0=disable. Default 0. Reserved for G12A * Bit 3 RW i2s_clk_en: 1=enable i2s_clk; 0=disable. Default 0. * Bit 2 RW spdif_clk_en: 1=enable spdif_clk; 0=disable. Default 0. * Bit 1 RW tmds_clk_en: 1=enable tmds_clk; 0=disable. Default 0. * Bit 0 RW pixel_clk_en: 1=enable pixel_clk; 0=disable. Default 0. */ #define HDMITX_TOP_CLK_CNTL (0x001) /* * Bit 31:28 RW rxsense_glitch_width: starting from G12A * Bit 27:16 RW rxsense_valid_width: starting from G12A * Bit 11: 0 RW hpd_valid_width: filter out width <= M*1024. Default 0. * Bit 15:12 RW hpd_glitch_width: filter out glitch <= N. Default 0. */ #define HDMITX_TOP_HPD_FILTER (0x002) /* * intr_maskn: MASK_N, one bit per interrupt source. * 1=Enable interrupt source; 0=Disable interrupt source. Default 0. * [ 7] rxsense_fall starting from G12A * [ 6] rxsense_rise starting from G12A * [ 5] err_i2c_timeout starting from G12A * [ 4] hdcp22_rndnum_err * [ 3] nonce_rfrsh_rise * [ 2] hpd_fall_intr * [ 1] hpd_rise_intr * [ 0] core_intr */ #define HDMITX_TOP_INTR_MASKN (0x003) /* * Bit 30: 0 RW intr_stat: For each bit, write 1 to manually set the interrupt * bit, read back the interrupt status. * Bit 31 R IP interrupt status * Bit 7 RW rxsense_fall starting from G12A * Bit 6 RW rxsense_rise starting from G12A * Bit 5 RW err_i2c_timeout starting from G12A * Bit 2 RW hpd_fall * Bit 1 RW hpd_rise * Bit 0 RW IP interrupt */ #define HDMITX_TOP_INTR_STAT (0x004) /* * [7] rxsense_fall starting from G12A * [6] rxsense_rise starting from G12A * [5] err_i2c_timeout starting from G12A * [4] hdcp22_rndnum_err * [3] nonce_rfrsh_rise * [2] hpd_fall * [1] hpd_rise * [0] core_intr_rise */ #define HDMITX_TOP_INTR_STAT_CLR (0x005) #define HDMITX_TOP_INTR_CORE BIT(0) #define HDMITX_TOP_INTR_HPD_RISE BIT(1) #define HDMITX_TOP_INTR_HPD_FALL BIT(2) #define HDMITX_TOP_INTR_RXSENSE_RISE BIT(6) #define HDMITX_TOP_INTR_RXSENSE_FALL BIT(7) /* * Bit 14:12 RW tmds_sel: 3'b000=Output zero; 3'b001=Output normal TMDS data; * 3'b010=Output PRBS data; 3'b100=Output shift pattern. Default 0. * Bit 11: 9 RW shift_pttn_repeat: 0=New pattern every clk cycle; 1=New pattern * every 2 clk cycles; ...; 7=New pattern every 8 clk cycles. Default 0. * Bit 8 RW shift_pttn_en: 1= Enable shift pattern generator; 0=Disable. * Default 0. * Bit 4: 3 RW prbs_pttn_mode: 0=PRBS11; 1=PRBS15; 2=PRBS7; 3=PRBS31. Default 0. * Bit 2: 1 RW prbs_pttn_width: 0=idle; 1=output 8-bit pattern; * 2=Output 1-bit pattern; 3=output 10-bit pattern. Default 0. * Bit 0 RW prbs_pttn_en: 1=Enable PRBS generator; 0=Disable. Default 0. */ #define HDMITX_TOP_BIST_CNTL (0x006) /* Bit 29:20 RW shift_pttn_data[59:50]. Default 0. */ /* Bit 19:10 RW shift_pttn_data[69:60]. Default 0. */ /* Bit 9: 0 RW shift_pttn_data[79:70]. Default 0. */ #define HDMITX_TOP_SHIFT_PTTN_012 (0x007) /* Bit 29:20 RW shift_pttn_data[29:20]. Default 0. */ /* Bit 19:10 RW shift_pttn_data[39:30]. Default 0. */ /* Bit 9: 0 RW shift_pttn_data[49:40]. Default 0. */ #define HDMITX_TOP_SHIFT_PTTN_345 (0x008) /* Bit 19:10 RW shift_pttn_data[ 9: 0]. Default 0. */ /* Bit 9: 0 RW shift_pttn_data[19:10]. Default 0. */ #define HDMITX_TOP_SHIFT_PTTN_67 (0x009) /* Bit 25:16 RW tmds_clk_pttn[19:10]. Default 0. */ /* Bit 9: 0 RW tmds_clk_pttn[ 9: 0]. Default 0. */ #define HDMITX_TOP_TMDS_CLK_PTTN_01 (0x00A) /* Bit 25:16 RW tmds_clk_pttn[39:30]. Default 0. */ /* Bit 9: 0 RW tmds_clk_pttn[29:20]. Default 0. */ #define HDMITX_TOP_TMDS_CLK_PTTN_23 (0x00B) /* * Bit 1 RW shift_tmds_clk_pttn:1=Enable shifting clk pattern, * used when TMDS CLK rate = TMDS character rate /4. Default 0. * Bit 0 R Reserved. Default 0. * [ 1] shift_tmds_clk_pttn * [ 0] load_tmds_clk_pttn */ #define HDMITX_TOP_TMDS_CLK_PTTN_CNTL (0x00C) /* * Bit 0 RW revocmem_wr_fail: Read back 1 to indicate Host write REVOC MEM * failure, write 1 to clear the failure flag. Default 0. */ #define HDMITX_TOP_REVOCMEM_STAT (0x00D) /* * Bit 1 R filtered RxSense status * Bit 0 R filtered HPD status. */ #define HDMITX_TOP_STAT0 (0x00E) #endif /* __MESON_DW_HDMI_H */