# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/mps,mpq4210.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Monolithic Power Systems MPQ4210 buck-boost regulator
maintainers:
- Tapio Reijonen <tapio.reijonen@vaisala.com>
description:
The MPQ4210 is a synchronous four-switch buck-boost controller with an I2C
interface. The output voltage is programmed through an 11-bit feedback
reference DAC and scaled by an external feedback resistor divider.
The controller ramps the feedback reference at 38, 50, 75 or 150 mV/ms.
The divider scales the ramp rate along with the voltage, so the output
ramp rates that regulator-ramp-delay can select are those values
multiplied by (R1 + R2) / R2.
allOf:
- $ref: regulator.yaml#
properties:
compatible:
const: mps,mpq4210
reg:
maxItems: 1
enable-gpios:
description: GPIO connected to the EN pin. If absent, EN is assumed to
be permanently asserted.
maxItems: 1
mps,fb-voltage-divider-ohms:
description: An array of two integers containing the resistor values R1
and R2 of the output feedback voltage divider.
maxItems: 2
required:
- compatible
- reg
- mps,fb-voltage-divider-ohms
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
regulator@64 {
compatible = "mps,mpq4210";
reg = <0x64>;
regulator-name = "vout";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <20000000>;
enable-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
/* R1 = 82 kOhm, R2 = 9.1 kOhm */
mps,fb-voltage-divider-ohms = <82000 9100>;
/* 50 mV/ms reference ramp x (82000 + 9100) / 9100 */
regulator-ramp-delay = <500>;
};
};