# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Rockchip rk3066 HDMI controller

maintainers:
  - Sandy Huang <hjc@rock-chips.com>
  - Heiko Stuebner <heiko@sntech.de>

properties:
  compatible:
    const: rockchip,rk3066-hdmi

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    const: hclk

  power-domains:
    maxItems: 1

  rockchip,grf:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Port node with two endpoints, numbered 0 and 1,
          connected respectively to vop0 and vop1.

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Port node with one endpoint connected to a hdmi-connector node.

    required:
      - port@0
      - port@1

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - pinctrl-0
  - pinctrl-names
  - power-domains
  - rockchip,grf
  - ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/rk3066a-cru.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/pinctrl/rockchip.h>
    #include <dt-bindings/power/rk3066-power.h>
    hdmi: hdmi@10116000 {
      compatible = "rockchip,rk3066-hdmi";
      reg = <0x10116000 0x2000>;
      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
      clocks = <&cru HCLK_HDMI>;
      clock-names = "hclk";
      pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
      pinctrl-names = "default";
      power-domains = <&power RK3066_PD_VIO>;
      rockchip,grf = <&grf>;

      ports {
        #address-cells = <1>;
        #size-cells = <0>;
        hdmi_in: port@0 {
          reg = <0>;
          #address-cells = <1>;
          #size-cells = <0>;
          hdmi_in_vop0: endpoint@0 {
            reg = <0>;
            remote-endpoint = <&vop0_out_hdmi>;
          };
          hdmi_in_vop1: endpoint@1 {
            reg = <1>;
            remote-endpoint = <&vop1_out_hdmi>;
          };
        };
        hdmi_out: port@1 {
          reg = <1>;
          hdmi_out_con: endpoint {
            remote-endpoint = <&hdmi_con_in>;
          };
        };
      };
    };

    pinctrl {
      hdmi {
        hdmi_hpd: hdmi-hpd {
          rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
        };
        hdmii2c_xfer: hdmii2c-xfer {
          rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
                          <0 RK_PA2 1 &pcfg_pull_none>;
        };
      };
    };