/* SPDX-License-Identifier: GPL-2.0 */
/*
* include/asm-parisc/processor.h
*
* Copyright (C) 1994 Linus Torvalds
* Copyright (C) 2001 Grant Grundler
*/
#ifndef __ASM_PARISC_PROCESSOR_H
#define __ASM_PARISC_PROCESSOR_H
#ifndef __ASSEMBLY__
#include <linux/threads.h>
#include <linux/irqreturn.h>
#include <asm/assembly.h>
#include <asm/prefetch.h>
#include <asm/hardware.h>
#include <asm/pdc.h>
#include <asm/ptrace.h>
#include <asm/types.h>
#include <asm/percpu.h>
#endif /* __ASSEMBLY__ */
#define HAVE_ARCH_PICK_MMAP_LAYOUT
#define TASK_SIZE_OF(tsk) ((tsk)->thread.task_size)
#define TASK_SIZE TASK_SIZE_OF(current)
#define TASK_UNMAPPED_BASE (current->thread.map_base)
#define DEFAULT_TASK_SIZE32 (0xFFF00000UL)
#define DEFAULT_MAP_BASE32 (0x40000000UL)
#ifdef CONFIG_64BIT
#define DEFAULT_TASK_SIZE (MAX_ADDRESS-0xf000000)
#define DEFAULT_MAP_BASE (0x200000000UL)
#else
#define DEFAULT_TASK_SIZE DEFAULT_TASK_SIZE32
#define DEFAULT_MAP_BASE DEFAULT_MAP_BASE32
#endif
/* XXX: STACK_TOP actually should be STACK_BOTTOM for parisc.
* prumpf */
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX DEFAULT_TASK_SIZE
#ifndef __ASSEMBLY__
unsigned long calc_max_stack_size(unsigned long stack_max);
/*
* Data detected about CPUs at boot time which is the same for all CPU's.
* HP boxes are SMP - ie identical processors.
*
* FIXME: some CPU rev info may be processor specific...
*/
struct system_cpuinfo_parisc {
unsigned int cpu_count;
unsigned int cpu_hz;
unsigned int hversion;
unsigned int sversion;
enum cpu_type cpu_type;
struct {
struct pdc_model model;
unsigned long versions;
unsigned long cpuid;
unsigned long capabilities;
char sys_model_name[81]; /* PDC-ROM returnes this model name */
} pdc;
const char *cpu_name; /* e.g. "PA7300LC (PCX-L2)" */
const char *family_name; /* e.g. "1.1e" */
};
/* Per CPU data structure - ie varies per CPU. */
struct cpuinfo_parisc {
unsigned long it_value; /* Interval Timer at last timer Intr */
unsigned long irq_count; /* number of IRQ's since boot */
unsigned long cpuid; /* aka slot_number or set to NO_PROC_ID */
unsigned long hpa; /* Host Physical address */
unsigned long txn_addr; /* MMIO addr of EIR or id_eid */
#ifdef CONFIG_SMP
unsigned long pending_ipi; /* bitmap of type ipi_message_type */
#endif
unsigned long bh_count; /* number of times bh was invoked */
unsigned long fp_rev;
unsigned long fp_model;
unsigned long cpu_num; /* CPU number from PAT firmware */
unsigned long cpu_loc; /* CPU location from PAT firmware */
unsigned int state;
struct parisc_device *dev;
};
extern struct system_cpuinfo_parisc boot_cpu_data;
DECLARE_PER_CPU(struct cpuinfo_parisc, cpu_data);
extern int time_keeper_id; /* CPU used for timekeeping */
#define CPU_HVERSION ((boot_cpu_data.hversion >> 4) & 0x0FFF)
struct thread_struct {
struct pt_regs regs;
unsigned long task_size;
unsigned long map_base;
unsigned long flags;
};
#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
/* Thread struct flags. */
#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
#define PARISC_UAC_SIGBUS (1UL << 1)
#define PARISC_KERNEL_DEATH (1UL << 31) /* see die_if_kernel()... */
#define PARISC_UAC_SHIFT 0
#define PARISC_UAC_MASK (PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS)
#define SET_UNALIGN_CTL(task,value) \
({ \
(task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \
| (((value) << PARISC_UAC_SHIFT) & \
PARISC_UAC_MASK)); \
0; \
})
#define GET_UNALIGN_CTL(task,addr) \
({ \
put_user(((task)->thread.flags & PARISC_UAC_MASK) \
>> PARISC_UAC_SHIFT, (int __user *) (addr)); \
})
#define INIT_THREAD { \
.regs = { .gr = { 0, }, \
.fr = { 0, }, \
.sr = { 0, }, \
.iasq = { 0, }, \
.iaoq = { 0, }, \
.cr27 = 0, \
}, \
.task_size = DEFAULT_TASK_SIZE, \
.map_base = DEFAULT_MAP_BASE, \
.flags = 0 \
}
struct task_struct;
void show_trace(struct task_struct *task, unsigned long *stack);
/*
* Start user thread in another space.
*
* Note that we set both the iaoq and r31 to the new pc. When
* the kernel initially calls execve it will return through an
* rfi path that will use the values in the iaoq. The execve
* syscall path will return through the gateway page, and
* that uses r31 to branch to.
*
* For ELF we clear r23, because the dynamic linker uses it to pass
* the address of the finalizer function.
*
* We also initialize sr3 to an illegal value (illegal for our
* implementation, not for the architecture).
*/
typedef unsigned int elf_caddr_t;
/* The ELF abi wants things done a "wee bit" differently than
* som does. Supporting this behavior here avoids
* having our own version of create_elf_tables.
*
* Oh, and yes, that is not a typo, we are really passing argc in r25
* and argv in r24 (rather than r26 and r25). This is because that's
* where __libc_start_main wants them.
*
* Duplicated from dl-machine.h for the benefit of readers:
*
* Our initial stack layout is rather different from everyone else's
* due to the unique PA-RISC ABI. As far as I know it looks like
* this:
----------------------------------- (user startup code creates this frame)
| 32 bytes of magic |
|---------------------------------|
| 32 bytes argument/sp save area |
|---------------------------------| (bprm->p)
| ELF auxiliary info |
| (up to 28 words) |
|---------------------------------|
| NULL |
|---------------------------------|
| Environment pointers |
|---------------------------------|
| NULL |
|---------------------------------|
| Argument pointers |
|---------------------------------| <- argv
| argc (1 word) |
|---------------------------------| <- bprm->exec (HACK!)
| N bytes of slack |
|---------------------------------|
| filename passed to execve |
|---------------------------------| (mm->env_end)
| env strings |
|---------------------------------| (mm->env_start, mm->arg_end)
| arg strings |
|---------------------------------|
| additional faked arg strings if |
| we're invoked via binfmt_script |
|---------------------------------| (mm->arg_start)
stack base is at TASK_SIZE - rlim_max.
on downward growing arches, it looks like this:
stack base at TASK_SIZE
| filename passed to execve
| env strings
| arg strings
| faked arg strings
| slack
| ELF
| envps
| argvs
| argc
* The pleasant part of this is that if we need to skip arguments we
* can just decrement argc and move argv, because the stack pointer
* is utterly unrelated to the location of the environment and
* argument vectors.
*
* Note that the S/390 people took the easy way out and hacked their
* GCC to make the stack grow downwards.
*
* Final Note: For entry from syscall, the W (wide) bit of the PSW
* is stuffed into the lowest bit of the user sp (%r30), so we fill
* it in here from the current->personality
*/
#define USER_WIDE_MODE (!is_32bit_task())
#define start_thread(regs, new_pc, new_sp) do { \
elf_addr_t *sp = (elf_addr_t *)new_sp; \
__u32 spaceid = (__u32)current->mm->context.space_id; \
elf_addr_t pc = (elf_addr_t)new_pc | 3; \
elf_caddr_t *argv = (elf_caddr_t *)bprm->exec + 1; \
\
regs->iasq[0] = spaceid; \
regs->iasq[1] = spaceid; \
regs->iaoq[0] = pc; \
regs->iaoq[1] = pc + 4; \
regs->sr[2] = LINUX_GATEWAY_SPACE; \
regs->sr[3] = 0xffff; \
regs->sr[4] = spaceid; \
regs->sr[5] = spaceid; \
regs->sr[6] = spaceid; \
regs->sr[7] = spaceid; \
regs->gr[ 0] = USER_PSW | (USER_WIDE_MODE ? PSW_W : 0); \
regs->fr[ 0] = 0LL; \
regs->fr[ 1] = 0LL; \
regs->fr[ 2] = 0LL; \
regs->fr[ 3] = 0LL; \
regs->gr[30] = (((unsigned long)sp + 63) &~ 63) | (USER_WIDE_MODE ? 1 : 0); \
regs->gr[31] = pc; \
\
get_user(regs->gr[25], (argv - 1)); \
regs->gr[24] = (long) argv; \
regs->gr[23] = 0; \
} while(0)
struct mm_struct;
extern unsigned long __get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) ((tsk)->thread.regs.iaoq[0])
#define KSTK_ESP(tsk) ((tsk)->thread.regs.gr[30])
#define cpu_relax() barrier()
/*
* parisc_requires_coherency() is used to identify the combined VIPT/PIPT
* cached CPUs which require a guarantee of coherency (no inequivalent aliases
* with different data, whether clean or not) to operate
*/
#ifdef CONFIG_PA8X00
extern int _parisc_requires_coherency;
#define parisc_requires_coherency() _parisc_requires_coherency
#else
#define parisc_requires_coherency() (0)
#endif
extern int running_on_qemu;
extern void __noreturn toc_intr(struct pt_regs *regs);
extern void toc_handler(void);
extern unsigned int toc_handler_size;
extern unsigned int toc_handler_csum;
extern void do_cpu_irq_mask(struct pt_regs *);
extern irqreturn_t timer_interrupt(int, void *);
extern irqreturn_t ipi_interrupt(int, void *);
extern void start_cpu_itimer(void);
extern void handle_interruption(int, struct pt_regs *);
/* called from assembly code: */
extern void start_parisc(void);
extern void smp_callin(unsigned long);
extern void sys_rt_sigreturn(struct pt_regs *, int);
extern void do_notify_resume(struct pt_regs *, long);
extern long do_syscall_trace_enter(struct pt_regs *);
extern void do_syscall_trace_exit(struct pt_regs *);
/* CPU startup and info */
struct seq_file;
extern void early_trap_init(void);
extern void collect_boot_cpu_data(void);
extern void btlb_init_per_cpu(void);
extern int show_cpuinfo (struct seq_file *m, void *v);
/* driver code in driver/parisc */
extern void processor_init(void);
struct parisc_device;
struct resource;
extern void sba_distributed_lmmio(struct parisc_device *, struct resource *);
extern void sba_directed_lmmio(struct parisc_device *, struct resource *);
extern void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask);
extern void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PARISC_PROCESSOR_H */