# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
properties:
compatible:
enum:
- qcom,spmi-adc-tm5
- qcom,spmi-adc-tm5-gen2
- qcom,adc-tm7 # Incomplete / subject to change
reg:
maxItems: 1
interrupts:
maxItems: 1
"#thermal-sensor-cells":
const: 1
description:
Number of cells required to uniquely identify the thermal sensors. Since
we have multiple sensors this is set to 1
"#address-cells":
const: 1
"#size-cells":
const: 0
qcom,avg-samples:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of samples to be used for measurement.
Not applicable for Gen2 ADC_TM peripheral.
enum:
- 1
- 2
- 4
- 8
- 16
default: 1
qcom,decimation:
$ref: /schemas/types.yaml#/definitions/uint32
description: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
Not applicable for Gen2 ADC_TM peripheral.
enum:
- 250
- 420
- 840
default: 840
patternProperties:
"^([-a-z0-9]*)@[0-7]$":
type: object
description:
Represent one thermal sensor.
properties:
reg:
description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
minimum: 0
maximum: 7
io-channels:
description:
From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
qcom,ratiometric:
$ref: /schemas/types.yaml#/definitions/flag
description:
Channel calibration type.
If this property is specified VADC will use the VDD reference
(1.875V) and GND for channel calibration. If property is not found,
channel will be calibrated with 0V and 1.25V reference channels,
also known as absolute calibration.
qcom,hw-settle-time-us:
description: Time between AMUX getting configured and the ADC starting conversion.
enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
qcom,pre-scaling:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Used for scaling the channel input signal before the
signal is fed to VADC. The configuration for this node is to know the
pre-determined ratio and use it for post scaling. It is a pair of
integers, denoting the numerator and denominator of the fraction by
which input signal is multiplied. For example, <1 3> indicates the
signal is scaled down to 1/3 of its value before ADC measurement. If
property is not found default value depending on chip will be used.
items:
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
qcom,avg-samples:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of samples to be used for measurement.
This property in child node is applicable only for Gen2 ADC_TM peripheral.
enum:
- 1
- 2
- 4
- 8
- 16
default: 1
qcom,decimation:
$ref: /schemas/types.yaml#/definitions/uint32
description: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
This property in child node is applicable only for Gen2 ADC_TM peripheral.
enum:
- 85
- 340
- 1360
default: 1360
required:
- reg
- io-channels
additionalProperties:
false
allOf:
- if:
properties:
compatible:
contains:
const: qcom,spmi-adc-tm5
then:
patternProperties:
"^([-a-z0-9]*)@[0-7]$":
properties:
qcom,decimation: false
qcom,avg-samples: false
- if:
properties:
compatible:
contains:
const: qcom,spmi-adc-tm5-gen2
then:
properties:
qcom,avg-samples: false
qcom,decimation: false
required:
- compatible
- reg
- interrupts
- "#address-cells"
- "#size-cells"
- "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
pm8150b_adc: adc@3100 {
reg = <0x3100>;
compatible = "qcom,spmi-adc5";
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
/* Other properties are omitted */
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "conn_therm";
};
};
pm8150b_adc_tm: adc-tm@3500 {
compatible = "qcom,spmi-adc-tm5";
reg = <0x3500>;
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
conn-therm@0 {
reg = <0>;
io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
};
- |
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
#include <dt-bindings/interrupt-controller/irq.h>
spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
pmk8350_vadc: adc@3100 {
reg = <0x3100>;
compatible = "qcom,spmi-adc7";
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
/* Other properties are omitted */
channel@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "xo_therm";
};
channel@147 {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "conn_therm";
};
};
pmk8350_adc_tm: adc-tm@3400 {
compatible = "qcom,spmi-adc-tm5-gen2";
reg = <0x3400>;
interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
pmk8350-xo-therm@0 {
reg = <0>;
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,decimation = <340>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
conn-therm@1 {
reg = <1>;
io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,avg-samples = <2>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
};
...