// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2plus display device setup / initialization. * * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ * Senthilvadivu Guruswamy * Sumit Semwal */ #include <linux/string.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/delay.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/slab.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> #include <linux/platform_data/omapdss.h> #include "omap_hwmod.h" #include "omap_device.h" #include "common.h" #include "soc.h" #include "iomap.h" #include "control.h" #include "display.h" #include "prm.h" #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 #define DISPC_CONTROL3 0x0848 #define DISPC_IRQSTATUS 0x0018 #define DSS_CONTROL 0x40 #define DSS_SDI_CONTROL 0x44 #define DSS_PLL_CONTROL 0x48 #define LCD_EN_MASK (0x1 << 0) #define DIGIT_EN_MASK (0x1 << 1) #define FRAMEDONE_IRQ_SHIFT 0 #define EVSYNC_EVEN_IRQ_SHIFT 2 #define EVSYNC_ODD_IRQ_SHIFT 3 #define FRAMEDONE2_IRQ_SHIFT 22 #define FRAMEDONE3_IRQ_SHIFT 30 #define FRAMEDONETV_IRQ_SHIFT 24 /* * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC * reset before deciding that something has gone wrong */ #define FRAMEDONE_IRQ_TIMEOUT 100 #if defined(CONFIG_FB_OMAP2) static struct platform_device omap_display_device = { .name = "omapdss", .id = -1, .dev = { .platform_data = NULL, }, }; #define OMAP4_DSIPHY_SYSCON_OFFSET 0x78 static struct regmap *omap4_dsi_mux_syscon; static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; u32 pipd_mask, pipd_shift; u32 reg; int ret; if (dsi_id == 0) { enable_mask = OMAP4_DSI1_LANEENABLE_MASK; enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; pipd_mask = OMAP4_DSI1_PIPD_MASK; pipd_shift = OMAP4_DSI1_PIPD_SHIFT; } else if (dsi_id == 1) { enable_mask = OMAP4_DSI2_LANEENABLE_MASK; enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; pipd_mask = OMAP4_DSI2_PIPD_MASK; pipd_shift = OMAP4_DSI2_PIPD_SHIFT; } else { return -ENODEV; } ret = regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®); if (ret) return ret; reg &= ~enable_mask; reg &= ~pipd_mask; reg |= (lanes << enable_shift) & enable_mask; reg |= (lanes << pipd_shift) & pipd_mask; regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg); return 0; } static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) return omap4_dsi_mux_pads(dsi_id, lane_mask); return 0; } static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) omap4_dsi_mux_pads(dsi_id, 0); } static enum omapdss_version __init omap_display_get_version(void) { if (cpu_is_omap24xx()) return OMAPDSS_VER_OMAP24xx; else if (cpu_is_omap3630()) return OMAPDSS_VER_OMAP3630; else if (cpu_is_omap34xx()) { if (soc_is_am35xx()) { return OMAPDSS_VER_AM35xx; } else { if (omap_rev() < OMAP3430_REV_ES3_0) return OMAPDSS_VER_OMAP34xx_ES1; else return OMAPDSS_VER_OMAP34xx_ES3; } } else if (omap_rev() == OMAP4430_REV_ES1_0) return OMAPDSS_VER_OMAP4430_ES1; else if (omap_rev() == OMAP4430_REV_ES2_0 || omap_rev() == OMAP4430_REV_ES2_1 || omap_rev() == OMAP4430_REV_ES2_2) return OMAPDSS_VER_OMAP4430_ES2; else if (cpu_is_omap44xx()) return OMAPDSS_VER_OMAP4; else if (soc_is_omap54xx()) return OMAPDSS_VER_OMAP5; else if (soc_is_am43xx()) return OMAPDSS_VER_AM43xx; else if (soc_is_dra7xx()) return OMAPDSS_VER_DRA7xx; else return OMAPDSS_VER_UNKNOWN; } static int __init omapdss_init_fbdev(void) { static struct omap_dss_board_info board_data = { .dsi_enable_pads = omap_dsi_enable_pads, .dsi_disable_pads = omap_dsi_disable_pads, }; struct device_node *node; int r; board_data.version = omap_display_get_version(); if (board_data.version == OMAPDSS_VER_UNKNOWN) { pr_err("DSS not supported on this SoC\n"); return -ENODEV; } omap_display_device.dev.platform_data = &board_data; r = platform_device_register(&omap_display_device); if (r < 0) { pr_err("Unable to register omapdss device\n"); return r; } /* create vrfb device */ r = omap_init_vrfb(); if (r < 0) { pr_err("Unable to register omapvrfb device\n"); return r; } /* create FB device */ r = omap_init_fb(); if (r < 0) { pr_err("Unable to register omapfb device\n"); return r; } /* create V4L2 display device */ r = omap_init_vout(); if (r < 0) { pr_err("Unable to register omap_vout device\n"); return r; } /* add DSI info for omap4 */ node = of_find_node_by_name(NULL, "omap4_padconf_global"); if (node) omap4_dsi_mux_syscon = syscon_node_to_regmap(node); of_node_put(node); return 0; } static const char * const omapdss_compat_names[] __initconst = { "ti,omap2-dss", "ti,omap3-dss", "ti,omap4-dss", "ti,omap5-dss", "ti,dra7-dss", }; static struct device_node * __init omapdss_find_dss_of_node(void) { struct device_node *node; int i; for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { node = of_find_compatible_node(NULL, NULL, omapdss_compat_names[i]); if (node) return node; } return NULL; } static int __init omapdss_init_of(void) { int r; struct device_node *node; struct platform_device *pdev; /* only create dss helper devices if dss is enabled in the .dts */ node = omapdss_find_dss_of_node(); if (!node) return 0; if (!of_device_is_available(node)) { of_node_put(node); return 0; } pdev = of_find_device_by_node(node); if (!pdev) { pr_err("Unable to find DSS platform device\n"); of_node_put(node); return -ENODEV; } r = of_platform_populate(node, NULL, NULL, &pdev->dev); put_device(&pdev->dev); of_node_put(node); if (r) { pr_err("Unable to populate DSS submodule devices\n"); return r; } return omapdss_init_fbdev(); } omap_device_initcall(omapdss_init_of); #endif /* CONFIG_FB_OMAP2 */ static void dispc_disable_outputs(void) { u32 v, irq_mask = 0; bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; int i; struct omap_dss_dispc_dev_attr *da; struct omap_hwmod *oh; oh = omap_hwmod_lookup("dss_dispc"); if (!oh) { WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); return; } if (!oh->dev_attr) { pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); return; } da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; /* store value of LCDENABLE and DIGITENABLE bits */ v = omap_hwmod_read(oh, DISPC_CONTROL); lcd_en = v & LCD_EN_MASK; digit_en = v & DIGIT_EN_MASK; /* store value of LCDENABLE for LCD2 */ if (da->manager_count > 2) { v = omap_hwmod_read(oh, DISPC_CONTROL2); lcd2_en = v & LCD_EN_MASK; } /* store value of LCDENABLE for LCD3 */ if (da->manager_count > 3) { v = omap_hwmod_read(oh, DISPC_CONTROL3); lcd3_en = v & LCD_EN_MASK; } if (!(lcd_en | digit_en | lcd2_en | lcd3_en)) return; /* no managers currently enabled */ /* * If any manager was enabled, we need to disable it before * DSS clocks are disabled or DISPC module is reset */ if (lcd_en) irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; if (digit_en) { if (da->has_framedonetv_irq) { irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; } else { irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | 1 << EVSYNC_ODD_IRQ_SHIFT; } } if (lcd2_en) irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; if (lcd3_en) irq_mask |= 1 << FRAMEDONE3_IRQ_SHIFT; /* * clear any previous FRAMEDONE, FRAMEDONETV, * EVSYNC_EVEN/ODD, FRAMEDONE2 or FRAMEDONE3 interrupts */ omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); /* disable LCD and TV managers */ v = omap_hwmod_read(oh, DISPC_CONTROL); v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); omap_hwmod_write(v, oh, DISPC_CONTROL); /* disable LCD2 manager */ if (da->manager_count > 2) { v = omap_hwmod_read(oh, DISPC_CONTROL2); v &= ~LCD_EN_MASK; omap_hwmod_write(v, oh, DISPC_CONTROL2); } /* disable LCD3 manager */ if (da->manager_count > 3) { v = omap_hwmod_read(oh, DISPC_CONTROL3); v &= ~LCD_EN_MASK; omap_hwmod_write(v, oh, DISPC_CONTROL3); } i = 0; while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != irq_mask) { i++; if (i > FRAMEDONE_IRQ_TIMEOUT) { pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); break; } mdelay(1); } } int omap_dss_reset(struct omap_hwmod *oh) { struct omap_hwmod_opt_clk *oc; int c = 0; int i, r; if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { pr_err("dss_core: hwmod data doesn't contain reset data\n"); return -EINVAL; } for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) clk_prepare_enable(oc->_clk); dispc_disable_outputs(); /* clear SDI registers */ if (cpu_is_omap3430()) { omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); } /* * clear DSS_CONTROL register to switch DSS clock sources to * PRCM clock, if any */ omap_hwmod_write(0x0, oh, DSS_CONTROL); omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warn("dss_core: waiting for reset to finish failed\n"); else pr_debug("dss_core: softreset done\n"); for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) clk_disable_unprepare(oc->_clk); r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; return r; }