# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/mediatek-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: PCIe controller on MediaTek SoCs

maintainers:
  - Christian Marangi <ansuelsmth@gmail.com>

properties:
  compatible:
    oneOf:
      - enum:
          - airoha,an7583-pcie
          - econet,en7528-pcie
          - mediatek,mt2712-pcie
          - mediatek,mt7622-pcie
          - mediatek,mt7629-pcie
      - items:
          - const: airoha,en7523-pcie
          - const: mediatek,mt7622-pcie

  reg:
    maxItems: 1

  reg-names:
    enum: [ port0, port1 ]

  clocks:
    minItems: 1
    maxItems: 6

  clock-names:
    minItems: 1
    items:
      - enum: [ sys_ck0, sys_ck1 ]
      - enum: [ ahb_ck0, ahb_ck1 ]
      - enum: [ aux_ck0, aux_ck1 ]
      - enum: [ axi_ck0, axi_ck1 ]
      - enum: [ obff_ck0, obff_ck1 ]
      - enum: [ pipe_ck0, pipe_ck1 ]

  resets:
    maxItems: 1

  reset-names:
    const: pcie-rst1

  interrupts:
    maxItems: 1

  interrupt-names:
    const: pcie_irq

  phys:
    maxItems: 1

  phy-names:
    enum: [ pcie-phy0, pcie-phy1 ]

  power-domains:
    maxItems: 1

  mediatek,pbus-csr:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to pbus-csr syscon
          - description: offset of pbus-csr base address register
          - description: offset of pbus-csr base address mask register
    description:
      Phandle with two arguments to the syscon node used to detect if
      a given address is accessible on PCIe controller.

  '#interrupt-cells':
    const: 1

  interrupt-controller:
    description: Interrupt controller node for handling legacy PCI interrupts.
    type: object
    properties:
      '#address-cells':
        const: 0
      '#interrupt-cells':
        const: 1
      interrupt-controller: true

    required:
      - '#address-cells'
      - '#interrupt-cells'
      - interrupt-controller

    additionalProperties: false

required:
  - compatible
  - reg
  - reg-names
  - ranges
  - clocks
  - clock-names
  - '#interrupt-cells'
  - interrupts
  - interrupt-names
  - interrupt-controller

allOf:
  - $ref: /schemas/pci/pci-host-bridge.yaml#

  - if:
      properties:
        compatible:
          const: airoha,an7583-pcie
    then:
      properties:
        reg-names:
          const: port1

        clocks:
          maxItems: 1

        clock-names:
          const: sys_ck1

        phy-names:
          const: pcie-phy1

        power-domain: false

      required:
        - resets
        - reset-names
        - phys
        - phy-names
        - mediatek,pbus-csr

  - if:
      properties:
        compatible:
          const: mediatek,mt2712-pcie
    then:
      properties:
        clocks:
          minItems: 2
          maxItems: 2

        clock-names:
          minItems: 2
          maxItems: 2

        reset: false

        reset-names: false

        power-domains: false

        mediatek,pbus-csr: false

      required:
        - phys
        - phy-names

  - if:
      properties:
        compatible:
          const: mediatek,mt7622-pcie
    then:
      properties:
        clocks:
          minItems: 6

        reset: false

        reset-names: false

        phys: false

        phy-names: false

        mediatek,pbus-csr: false

      required:
        - power-domains

  - if:
      properties:
        compatible:
          const: mediatek,mt7629-pcie
    then:
      properties:
        clocks:
          minItems: 6

        reset: false

        reset-names: false

        mediatek,pbus-csr: false

      required:
        - power-domains

  - if:
      properties:
        compatible:
          contains:
            const: airoha,en7523-pcie
    then:
      properties:
        clocks:
          maxItems: 1

        clock-names:
          maxItems: 1

        reset: false

        reset-names: false

        phys: false

        phy-names: false

        power-domain: false

        mediatek,pbus-csr: false

  - if:
      properties:
        compatible:
          contains:
            const: econet,en7528-pcie
    then:
      properties:
        clocks:
          maxItems: 1

        clock-names:
          maxItems: 1

        resets: false

        reset-names: false

        power-domains: false

        mediatek,pbus-csr: false

      required:
        - phys
        - phy-names

unevaluatedProperties: false

examples:
  # MT2712
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/phy/phy.h>

    soc_1 {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie@112ff000 {
            compatible = "mediatek,mt2712-pcie";
            device_type = "pci";
            reg = <0 0x112ff000 0 0x1000>;
            reg-names = "port1";
            linux,pci-domain = <1>;
            #address-cells = <3>;
            #size-cells = <2>;
            interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "pcie_irq";
            clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P1_SEL */
                     <&pericfg>; /* CLK_PERI_PCIE1 */
            clock-names = "sys_ck1", "ahb_ck1";
            phys = <&u3port1 PHY_TYPE_PCIE>;
            phy-names = "pcie-phy1";
            bus-range = <0x00 0xff>;
            ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;

            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 7>;
            interrupt-map = <0 0 0 1 &pcie_intc1 0>,
                            <0 0 0 2 &pcie_intc1 1>,
                            <0 0 0 3 &pcie_intc1 2>,
                            <0 0 0 4 &pcie_intc1 3>;
            pcie_intc1: interrupt-controller {
                interrupt-controller;
                #address-cells = <0>;
                #interrupt-cells = <1>;
            };
        };

        pcie@11700000 {
            compatible = "mediatek,mt2712-pcie";
            device_type = "pci";
            reg = <0 0x11700000 0 0x1000>;
            reg-names = "port0";
            linux,pci-domain = <0>;
            #address-cells = <3>;
            #size-cells = <2>;
            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "pcie_irq";
            clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P0_SEL */
                     <&pericfg>; /* CLK_PERI_PCIE0 */
            clock-names = "sys_ck0", "ahb_ck0";
            phys = <&u3port0 PHY_TYPE_PCIE>;
            phy-names = "pcie-phy0";
            bus-range = <0x00 0xff>;
            ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;

            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 7>;
            interrupt-map = <0 0 0 1 &pcie_intc0 0>,
                            <0 0 0 2 &pcie_intc0 1>,
                            <0 0 0 3 &pcie_intc0 2>,
                            <0 0 0 4 &pcie_intc0 3>;
            pcie_intc0: interrupt-controller {
                interrupt-controller;
                #address-cells = <0>;
                #interrupt-cells = <1>;
            };
        };
    };

  # MT7622
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/power/mt7622-power.h>

    soc_2 {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie@1a143000 {
            compatible = "mediatek,mt7622-pcie";
            device_type = "pci";
            reg = <0 0x1a143000 0 0x1000>;
            reg-names = "port0";
            linux,pci-domain = <0>;
            #address-cells = <3>;
            #size-cells = <2>;
            interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
            interrupt-names = "pcie_irq";
            clocks = <&pciesys>, /* CLK_PCIE_P0_MAC_EN */
                     <&pciesys>, /* CLK_PCIE_P0_AHB_EN */
                     <&pciesys>, /* CLK_PCIE_P0_AUX_EN */
                     <&pciesys>, /* CLK_PCIE_P0_AXI_EN */
                     <&pciesys>, /* CLK_PCIE_P0_OBFF_EN */
                     <&pciesys>; /* CLK_PCIE_P0_PIPE_EN */
            clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
                          "axi_ck0", "obff_ck0", "pipe_ck0";

            power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
            bus-range = <0x00 0xff>;
            ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;

            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 7>;
            interrupt-map = <0 0 0 1 &pcie_intc0_1 0>,
                            <0 0 0 2 &pcie_intc0_1 1>,
                            <0 0 0 3 &pcie_intc0_1 2>,
                            <0 0 0 4 &pcie_intc0_1 3>;
            pcie_intc0_1: interrupt-controller {
                interrupt-controller;
                #address-cells = <0>;
                #interrupt-cells = <1>;
            };
        };

        pcie@1a145000 {
            compatible = "mediatek,mt7622-pcie";
            device_type = "pci";
            reg = <0 0x1a145000 0 0x1000>;
            reg-names = "port1";
            linux,pci-domain = <1>;
            #address-cells = <3>;
            #size-cells = <2>;
            interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
            interrupt-names = "pcie_irq";
            clocks = <&pciesys>, /* CLK_PCIE_P1_MAC_EN */
                     /* designer has connect RC1 with p0_ahb clock */
                     <&pciesys>, /* CLK_PCIE_P0_AHB_EN */
                     <&pciesys>, /* CLK_PCIE_P1_AUX_EN */
                     <&pciesys>, /* CLK_PCIE_P1_AXI_EN */
                     <&pciesys>, /* CLK_PCIE_P1_OBFF_EN */
                     <&pciesys>; /* CLK_PCIE_P1_PIPE_EN */
            clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
                          "axi_ck1", "obff_ck1", "pipe_ck1";

            power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
            bus-range = <0x00 0xff>;
            ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;

            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 7>;
            interrupt-map = <0 0 0 1 &pcie_intc1_1 0>,
                            <0 0 0 2 &pcie_intc1_1 1>,
                            <0 0 0 3 &pcie_intc1_1 2>,
                            <0 0 0 4 &pcie_intc1_1 3>;
            pcie_intc1_1: interrupt-controller {
                interrupt-controller;
                #address-cells = <0>;
                #interrupt-cells = <1>;
            };
        };
    };

  # AN7583
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/en7523-clk.h>

    soc_3 {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie@1fa92000 {
            compatible = "airoha,an7583-pcie";
            device_type = "pci";
            linux,pci-domain = <1>;
            #address-cells = <3>;
            #size-cells = <2>;

            reg = <0x0 0x1fa92000 0x0 0x1670>;
            reg-names = "port1";

            clocks = <&scuclk EN7523_CLK_PCIE>;
            clock-names = "sys_ck1";

            phys = <&pciephy>;
            phy-names = "pcie-phy1";

            ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;

            resets = <&scuclk>; /* AN7583_PCIE1_RST */
            reset-names = "pcie-rst1";

            mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;

            interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "pcie_irq";
            bus-range = <0x00 0xff>;
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 7>;
            interrupt-map = <0 0 0 1 &pcie_intc1 0>,
                            <0 0 0 2 &pcie_intc1 1>,
                            <0 0 0 3 &pcie_intc1 2>,
                            <0 0 0 4 &pcie_intc1 3>;

            pcie_intc1_4: interrupt-controller {
                interrupt-controller;
                #address-cells = <0>;
                #interrupt-cells = <1>;
            };
        };
    };