/*
* "Optimize" a list of dependencies as spit out by gcc -MD
* for the kernel build
* ===========================================================================
*
* Author Kai Germaschewski
* Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*
* Introduction:
*
* gcc produces a very nice and correct list of dependencies which
* tells make when to remake a file.
*
* To use this list as-is however has the drawback that virtually
* every file in the kernel includes autoconf.h.
*
* If the user re-runs make *config, autoconf.h will be
* regenerated. make notices that and will rebuild every file which
* includes autoconf.h, i.e. basically all files. This is extremely
* annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
*
* So we play the same trick that "mkdep" played before. We replace
* the dependency on autoconf.h by a dependency on every config
* option which is mentioned in any of the listed prerequisites.
*
* kconfig populates a tree in include/config/ with an empty file
* for each config symbol and when the configuration is updated
* the files representing changed config options are touched
* which then let make pick up the changes and the files that use
* the config symbols are rebuilt.
*
* So if the user changes his CONFIG_HIS_DRIVER option, only the objects
* which depend on "include/config/HIS_DRIVER" will be rebuilt,
* so most likely only his driver ;-)
*
* The idea above dates, by the way, back to Michael E Chastain, AFAIK.
*
* So to get dependencies right, there are two issues:
* o if any of the files the compiler read changed, we need to rebuild
* o if the command line given to the compile the file changed, we
* better rebuild as well.
*
* The former is handled by using the -MD output, the later by saving
* the command line used to compile the old object and comparing it
* to the one we would now use.
*
* Again, also this idea is pretty old and has been discussed on
* kbuild-devel a long time ago. I don't have a sensibly working
* internet connection right now, so I rather don't mention names
* without double checking.
*
* This code here has been based partially based on mkdep.c, which
* says the following about its history:
*
* Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
* This is a C version of syncdep.pl by Werner Almesberger.
*
*
* It is invoked as
*
* fixdep <depfile> <target> <cmdline>
*
* and will read the dependency file <depfile>
*
* The transformed dependency snipped is written to stdout.
*
* It first generates a line
*
* savedcmd_<target> = <cmdline>
*
* and then basically copies the .<target>.d file to stdout, in the
* process filtering out the dependency on autoconf.h and adding
* dependencies on include/config/MY_OPTION for every
* CONFIG_MY_OPTION encountered in any of the prerequisites.
*
* We don't even try to really parse the header files, but
* merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
* be picked up as well. It's not a problem with respect to
* correctness, since that can only give too many dependencies, thus
* we cannot miss a rebuild. Since people tend to not mention totally
* unrelated CONFIG_ options all over the place, it's not an
* efficiency problem either.
*
* (Note: it'd be easy to port over the complete mkdep state machine,
* but I don't think the added complexity is worth it)
*/
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <stdbool.h>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
static void usage(void)
{
fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
exit(1);
}
struct item {
struct item *next;
unsigned int len;
unsigned int hash;
char name[];
};
#define HASHSZ 256
static struct item *config_hashtab[HASHSZ], *file_hashtab[HASHSZ];
static unsigned int strhash(const char *str, unsigned int sz)
{
/* fnv32 hash */
unsigned int i, hash = 2166136261U;
for (i = 0; i < sz; i++)
hash = (hash ^ str[i]) * 0x01000193;
return hash;
}
/*
* Add a new value to the configuration string.
*/
static void add_to_hashtable(const char *name, int len, unsigned int hash,
struct item *hashtab[])
{
struct item *aux = malloc(sizeof(*aux) + len);
if (!aux) {
perror("fixdep:malloc");
exit(1);
}
memcpy(aux->name, name, len);
aux->len = len;
aux->hash = hash;
aux->next = hashtab[hash % HASHSZ];
hashtab[hash % HASHSZ] = aux;
}
/*
* Lookup a string in the hash table. If found, just return true.
* If not, add it to the hashtable and return false.
*/
static bool in_hashtable(const char *name, int len, struct item *hashtab[])
{
struct item *aux;
unsigned int hash = strhash(name, len);
for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) {
if (aux->hash == hash && aux->len == len &&
memcmp(aux->name, name, len) == 0)
return true;
}
add_to_hashtable(name, len, hash, hashtab);
return false;
}
/*
* Record the use of a CONFIG_* word.
*/
static void use_config(const char *m, int slen)
{
if (in_hashtable(m, slen, config_hashtab))
return;
/* Print out a dependency path from a symbol name. */
printf(" $(wildcard include/config/%.*s) \\\n", slen, m);
}
/* test if s ends in sub */
static int str_ends_with(const char *s, int slen, const char *sub)
{
int sublen = strlen(sub);
if (sublen > slen)
return 0;
return !memcmp(s + slen - sublen, sub, sublen);
}
static void parse_config_file(const char *p)
{
const char *q, *r;
const char *start = p;
while ((p = strstr(p, "CONFIG_"))) {
if (p > start && (isalnum(p[-1]) || p[-1] == '_')) {
p += 7;
continue;
}
p += 7;
q = p;
while (isalnum(*q) || *q == '_')
q++;
if (str_ends_with(p, q - p, "_MODULE"))
r = q - 7;
else
r = q;
if (r > p)
use_config(p, r - p);
p = q;
}
}
static void *read_file(const char *filename)
{
struct stat st;
int fd;
char *buf;
fd = open(filename, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "fixdep: error opening file: ");
perror(filename);
exit(2);
}
if (fstat(fd, &st) < 0) {
fprintf(stderr, "fixdep: error fstat'ing file: ");
perror(filename);
exit(2);
}
buf = malloc(st.st_size + 1);
if (!buf) {
perror("fixdep: malloc");
exit(2);
}
if (read(fd, buf, st.st_size) != st.st_size) {
perror("fixdep: read");
exit(2);
}
buf[st.st_size] = '\0';
close(fd);
return buf;
}
/* Ignore certain dependencies */
static int is_ignored_file(const char *s, int len)
{
return str_ends_with(s, len, "include/generated/autoconf.h");
}
/* Do not parse these files */
static int is_no_parse_file(const char *s, int len)
{
/* rustc may list binary files in dep-info */
return str_ends_with(s, len, ".rlib") ||
str_ends_with(s, len, ".rmeta") ||
str_ends_with(s, len, ".so");
}
/*
* Important: The below generated source_foo.o and deps_foo.o variable
* assignments are parsed not only by make, but also by the rather simple
* parser in scripts/mod/sumversion.c.
*/
static void parse_dep_file(char *p, const char *target)
{
bool saw_any_target = false;
bool is_target = true;
bool is_source = false;
bool need_parse;
char *q, saved_c;
while (*p) {
/* handle some special characters first. */
switch (*p) {
case '#':
/*
* skip comments.
* rustc may emit comments to dep-info.
*/
p++;
while (*p != '\0' && *p != '\n') {
/*
* escaped newlines continue the comment across
* multiple lines.
*/
if (*p == '\\')
p++;
p++;
}
continue;
case ' ':
case '\t':
/* skip whitespaces */
p++;
continue;
case '\\':
/*
* backslash/newline combinations continue the
* statement. Skip it just like a whitespace.
*/
if (*(p + 1) == '\n') {
p += 2;
continue;
}
break;
case '\n':
/*
* Makefiles use a line-based syntax, where the newline
* is the end of a statement. After seeing a newline,
* we expect the next token is a target.
*/
p++;
is_target = true;
continue;
case ':':
/*
* assume the first dependency after a colon as the
* source file.
*/
p++;
is_target = false;
is_source = true;
continue;
}
/* find the end of the token */
q = p;
while (*q != ' ' && *q != '\t' && *q != '\n' && *q != '#' && *q != ':') {
if (*q == '\\') {
/*
* backslash/newline combinations work like as
* a whitespace, so this is the end of token.
*/
if (*(q + 1) == '\n')
break;
/* escaped special characters */
if (*(q + 1) == '#' || *(q + 1) == ':') {
memmove(p + 1, p, q - p);
p++;
}
q++;
}
if (*q == '\0')
break;
q++;
}
/* Just discard the target */
if (is_target) {
p = q;
continue;
}
saved_c = *q;
*q = '\0';
need_parse = false;
/*
* Do not list the source file as dependency, so that kbuild is
* not confused if a .c file is rewritten into .S or vice versa.
* Storing it in source_* is needed for modpost to compute
* srcversions.
*/
if (is_source) {
/*
* The DT build rule concatenates multiple dep files.
* When processing them, only process the first source
* name, which will be the original one, and ignore any
* other source names, which will be intermediate
* temporary files.
*
* rustc emits the same dependency list for each
* emission type. It is enough to list the source name
* just once.
*/
if (!saw_any_target) {
saw_any_target = true;
printf("source_%s := %s\n\n", target, p);
printf("deps_%s := \\\n", target);
need_parse = true;
}
} else if (!is_ignored_file(p, q - p) &&
!in_hashtable(p, q - p, file_hashtab)) {
printf(" %s \\\n", p);
need_parse = true;
}
if (need_parse && !is_no_parse_file(p, q - p)) {
void *buf;
buf = read_file(p);
parse_config_file(buf);
free(buf);
}
is_source = false;
*q = saved_c;
p = q;
}
if (!saw_any_target) {
fprintf(stderr, "fixdep: parse error; no targets found\n");
exit(1);
}
printf("\n%s: $(deps_%s)\n\n", target, target);
printf("$(deps_%s):\n", target);
}
int main(int argc, char *argv[])
{
const char *depfile, *target, *cmdline;
void *buf;
if (argc != 4)
usage();
depfile = argv[1];
target = argv[2];
cmdline = argv[3];
printf("savedcmd_%s := %s\n\n", target, cmdline);
buf = read_file(depfile);
parse_dep_file(buf, target);
free(buf);
fflush(stdout);
/*
* In the intended usage, the stdout is redirected to .*.cmd files.
* Call ferror() to catch errors such as "No space left on device".
*/
if (ferror(stdout)) {
fprintf(stderr, "fixdep: not all data was written to the output\n");
exit(1);
}
return 0;
}