// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "motorola-mapphone-common.dtsi" / { gpio_keys { compatible = "gpio-keys"; volume_down { label = "Volume Down"; gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ linux,code = <KEY_VOLUMEDOWN>; linux,can-disable; /* Value above 7.95ms for no GPIO hardware debounce */ debounce-interval = <10>; }; /* * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead * of the gpio interrupt to avoid lost events in deeper idle states. */ slider { label = "Keypad Slide"; interrupts-extended = <&omap4_pmx_core 0xd6>; gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; linux,can-disable; /* Value above 7.95ms for no GPIO hardware debounce */ debounce-interval = <10>; }; }; }; / { model = "Motorola Droid 4 XT894"; compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; }; &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; linux,keymap = < /* Row 1 */ MATRIX_KEY(0, 2, KEY_1) MATRIX_KEY(0, 6, KEY_2) MATRIX_KEY(2, 3, KEY_3) MATRIX_KEY(0, 7, KEY_4) MATRIX_KEY(0, 4, KEY_5) MATRIX_KEY(5, 5, KEY_6) MATRIX_KEY(0, 1, KEY_7) MATRIX_KEY(0, 5, KEY_8) MATRIX_KEY(0, 0, KEY_9) MATRIX_KEY(1, 6, KEY_0) /* Row 2 */ MATRIX_KEY(3, 4, KEY_APOSTROPHE) MATRIX_KEY(7, 6, KEY_Q) MATRIX_KEY(7, 7, KEY_W) MATRIX_KEY(7, 2, KEY_E) MATRIX_KEY(1, 0, KEY_R) MATRIX_KEY(4, 4, KEY_T) MATRIX_KEY(1, 2, KEY_Y) MATRIX_KEY(6, 7, KEY_U) MATRIX_KEY(2, 2, KEY_I) MATRIX_KEY(5, 6, KEY_O) MATRIX_KEY(3, 7, KEY_P) MATRIX_KEY(6, 5, KEY_BACKSPACE) /* Row 3 */ MATRIX_KEY(5, 4, KEY_TAB) MATRIX_KEY(5, 7, KEY_A) MATRIX_KEY(2, 7, KEY_S) MATRIX_KEY(7, 0, KEY_D) MATRIX_KEY(2, 6, KEY_F) MATRIX_KEY(6, 2, KEY_G) MATRIX_KEY(6, 6, KEY_H) MATRIX_KEY(1, 4, KEY_J) MATRIX_KEY(3, 1, KEY_K) MATRIX_KEY(2, 1, KEY_L) MATRIX_KEY(4, 6, KEY_ENTER) /* Row 4 */ MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ MATRIX_KEY(6, 1, KEY_Z) MATRIX_KEY(7, 4, KEY_X) MATRIX_KEY(5, 1, KEY_C) MATRIX_KEY(1, 7, KEY_V) MATRIX_KEY(2, 4, KEY_B) MATRIX_KEY(4, 1, KEY_N) MATRIX_KEY(1, 1, KEY_M) MATRIX_KEY(3, 5, KEY_COMMA) MATRIX_KEY(5, 2, KEY_DOT) MATRIX_KEY(6, 3, KEY_UP) MATRIX_KEY(7, 3, KEY_OK) /* Row 5 */ MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ MATRIX_KEY(6, 0, KEY_MINUS) MATRIX_KEY(4, 7, KEY_EQUAL) MATRIX_KEY(1, 5, KEY_SPACE) MATRIX_KEY(3, 2, KEY_SLASH) MATRIX_KEY(4, 3, KEY_LEFT) MATRIX_KEY(5, 3, KEY_DOWN) MATRIX_KEY(3, 3, KEY_RIGHT) /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ MATRIX_KEY(5, 0, KEY_VOLUMEUP) >; }; &i2c1 { led-controller@38 { compatible = "ti,lm3532"; #address-cells = <1>; #size-cells = <0>; reg = <0x38>; enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; ramp-up-us = <1024>; ramp-down-us = <8193>; backlight_led: led@0 { reg = <0>; led-sources = <2>; ti,led-mode = <0>; label = ":backlight"; }; led@1 { reg = <1>; led-sources = <1>; ti,led-mode = <0>; label = ":kbd_backlight"; }; }; }; &i2c4 { lis3dh: accelerometer@18 { compatible = "st,lis3dh-accel"; reg = <0x18>; vdd-supply = <&vhvio>; interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ rotation-matrix = "0", "-1", "0", "1", "0", "0", "0", "0", "1"; }; };