# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
maintainers:
- Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
description:
The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
forwarding.
allOf:
- $ref: /schemas/i2c/i2c-atr.yaml#
properties:
compatible:
enum:
- ti,ds90ub960-q1
- ti,ds90ub9702-q1
reg:
maxItems: 1
clocks:
maxItems: 1
description:
Reference clock connected to the REFCLK pin.
clock-names:
items:
- const: refclk
powerdown-gpios:
maxItems: 1
description:
Specifier for the GPIO connected to the PDB pin.
i2c-alias-pool:
minItems: 1
maxItems: 32
links:
type: object
additionalProperties: false
properties:
'#address-cells':
const: 1
'#size-cells':
const: 0
ti,manual-strobe:
type: boolean
description:
Enable manual strobe position and EQ level
patternProperties:
'^link@[0-3]$':
type: object
additionalProperties: false
properties:
reg:
description: The link number
maxItems: 1
i2c-alias:
description:
The I2C address used for the serializer. Transactions to this
address on the I2C bus where the deserializer resides are
forwarded to the serializer.
ti,rx-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # RAW10
- 1 # RAW12 HF
- 2 # RAW12 LF
- 3 # CSI2 SYNC
- 4 # CSI2 NON-SYNC
description:
FPD-Link Input Mode. This should reflect the hardware and the
default mode of the connected device.
ti,cdr-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # FPD-Link III
- 1 # FPD-Link IV
description:
FPD-Link CDR Mode. This should reflect the hardware and the
default mode of the connected device.
ti,strobe-pos:
$ref: /schemas/types.yaml#/definitions/int32
minimum: -13
maximum: 13
description: Manual strobe position
ti,eq-level:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 14
description: Manual EQ level
serializer:
type: object
description: FPD-Link Serializer node
required:
- reg
- i2c-alias
- ti,rx-mode
- serializer
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 0
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@1:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 1
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@2:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 2
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@3:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 3
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@4:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: CSI-2 Output 0
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
minItems: 1
maxItems: 4
link-frequencies:
maxItems: 1
required:
- data-lanes
- link-frequencies
port@5:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: CSI-2 Output 1
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
minItems: 1
maxItems: 4
link-frequencies:
maxItems: 1
required:
- data-lanes
- link-frequencies
required:
- port@0
- port@1
- port@2
- port@3
- port@4
- port@5
required:
- compatible
- reg
- clocks
- clock-names
- ports
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
deser@3d {
compatible = "ti,ds90ub960-q1";
reg = <0x3d>;
clock-names = "refclk";
clocks = <&fixed_clock>;
powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* Port 0, Camera 0 */
port@0 {
reg = <0>;
ub960_fpd3_1_in: endpoint {
remote-endpoint = <&ub953_1_out>;
};
};
/* Port 1, Camera 1 */
port@1 {
reg = <1>;
ub960_fpd3_2_in: endpoint {
remote-endpoint = <&ub913_2_out>;
hsync-active = <0>;
vsync-active = <1>;
};
};
/* Port 2, unconnected */
port@2 {
reg = <2>;
};
/* Port 3, unconnected */
port@3 {
reg = <3>;
};
/* Port 4, CSI-2 TX */
port@4 {
reg = <4>;
ds90ub960_0_csi_out: endpoint {
data-lanes = <1 2 3 4>;
link-frequencies = /bits/ 64 <800000000>;
remote-endpoint = <&csi2_phy0>;
};
};
/* Port 5, unconnected */
port@5 {
reg = <5>;
};
};
links {
#address-cells = <1>;
#size-cells = <0>;
/* Link 0 has DS90UB953 serializer and IMX274 sensor */
link@0 {
reg = <0>;
i2c-alias = <0x44>;
ti,rx-mode = <3>;
serializer1: serializer {
compatible = "ti,ds90ub953-q1";
gpio-controller;
#gpio-cells = <2>;
#clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ub953_1_in: endpoint {
data-lanes = <1 2 3 4>;
remote-endpoint = <&sensor_1_out>;
};
};
port@1 {
reg = <1>;
ub953_1_out: endpoint {
remote-endpoint = <&ub960_fpd3_1_in>;
};
};
};
i2c {
#address-cells = <1>;
#size-cells = <0>;
sensor@1a {
compatible = "sony,imx274";
reg = <0x1a>;
reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
port {
sensor_1_out: endpoint {
remote-endpoint = <&ub953_1_in>;
};
};
};
};
};
}; /* End of link@0 */
/* Link 1 has DS90UB913 serializer and MT9V111 sensor */
link@1 {
reg = <1>;
i2c-alias = <0x45>;
ti,rx-mode = <0>;
serializer2: serializer {
compatible = "ti,ds90ub913a-q1";
gpio-controller;
#gpio-cells = <2>;
clocks = <&clk_cam_48M>;
clock-names = "clkin";
#clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ub913_2_in: endpoint {
remote-endpoint = <&sensor_2_out>;
pclk-sample = <1>;
};
};
port@1 {
reg = <1>;
ub913_2_out: endpoint {
remote-endpoint = <&ub960_fpd3_2_in>;
};
};
};
i2c {
#address-cells = <1>;
#size-cells = <0>;
sensor@48 {
compatible = "aptina,mt9v111";
reg = <0x48>;
clocks = <&serializer2>;
port {
sensor_2_out: endpoint {
remote-endpoint = <&ub913_2_in>;
};
};
};
};
};
}; /* End of link@1 */
};
};
};
...