// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2014 Linaro Ltd.
* Copyright (c) 2013-2014 HiSilicon Limited.
*/
#include <dt-bindings/clock/hix5hd2-clock.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &uart0;
};
gic: interrupt-controller@f8a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
/* gic dist base, gic cpu base */
reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges = <0 0xf8000000 0x8000000>;
amba-bus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
timer0: timer@2000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00002000 0x1000>;
/* timer00 & timer01 */
interrupts = <0 24 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
status = "disabled";
};
timer1: timer@a29000 {
/*
* Only used in NORMAL state, not available ins
* SLOW or DOZE state.
* The rate is fixed in 24MHz.
*/
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a29000 0x1000>;
/* timer10 & timer11 */
interrupts = <0 25 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
status = "disabled";
};
timer2: timer@a2a000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a2a000 0x1000>;
/* timer20 & timer21 */
interrupts = <0 26 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
status = "disabled";
};
timer3: timer@a2b000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a2b000 0x1000>;
/* timer30 & timer31 */
interrupts = <0 27 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
status = "disabled";
};
timer4: timer@a81000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a81000 0x1000>;
/* timer30 & timer31 */
interrupts = <0 28 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
status = "disabled";
};
uart0: serial@b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b00000 0x1000>;
interrupts = <0 49 4>;
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
uart1: serial@6000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00006000 0x1000>;
interrupts = <0 50 4>;
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
uart2: serial@b02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b02000 0x1000>;
interrupts = <0 51 4>;
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
uart3: serial@b03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b03000 0x1000>;
interrupts = <0 52 4>;
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
uart4: serial@b04000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb04000 0x1000>;
interrupts = <0 53 4>;
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
gpio0: gpio@b20000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb20000 0x1000>;
interrupts = <0 108 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio1: gpio@b21000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb21000 0x1000>;
interrupts = <0 109 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio2: gpio@b22000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb22000 0x1000>;
interrupts = <0 110 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio3: gpio@b23000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb23000 0x1000>;
interrupts = <0 111 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio4: gpio@b24000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb24000 0x1000>;
interrupts = <0 112 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio5: gpio@4000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x004000 0x1000>;
interrupts = <0 113 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio6: gpio@b26000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb26000 0x1000>;
interrupts = <0 114 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio7: gpio@b27000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb27000 0x1000>;
interrupts = <0 115 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio8: gpio@b28000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb28000 0x1000>;
interrupts = <0 116 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio9: gpio@b29000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb29000 0x1000>;
interrupts = <0 117 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio10: gpio@b2a000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2a000 0x1000>;
interrupts = <0 118 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio11: gpio@b2b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2b000 0x1000>;
interrupts = <0 119 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio12: gpio@b2c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2c000 0x1000>;
interrupts = <0 120 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio13: gpio@b2d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2d000 0x1000>;
interrupts = <0 121 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio14: gpio@b2e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2e000 0x1000>;
interrupts = <0 122 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio15: gpio@b2f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2f000 0x1000>;
interrupts = <0 123 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio16: gpio@b30000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb30000 0x1000>;
interrupts = <0 124 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio17: gpio@b31000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb31000 0x1000>;
interrupts = <0 125 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
wdt0: watchdog@a2c000 {
compatible = "arm,sp805", "arm,primecell";
arm,primecell-periphid = <0x00141805>;
reg = <0xa2c000 0x1000>;
interrupts = <0 29 4>;
clocks = <&clock HIX5HD2_WDG0_RST>,
<&clock HIX5HD2_WDG0_RST>;
clock-names = "wdog_clk", "apb_pclk";
};
};
local_timer@a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
};
l2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0x00a10000 0x100000>;
interrupts = <0 15 4>;
cache-unified;
cache-level = <2>;
};
sysctrl: system-controller@0 {
compatible = "hisilicon,sysctrl", "syscon";
reg = <0x00000000 0x1000>;
};
reboot {
compatible = "syscon-reboot";
regmap = <&sysctrl>;
offset = <0x4>;
mask = <0xdeadbeef>;
};
cpuctrl@a22000 {
compatible = "hisilicon,cpuctrl";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00a22000 0x2000>;
ranges = <0 0x00a22000 0x2000>;
clock: clock@0 {
compatible = "hisilicon,hix5hd2-clock";
reg = <0 0x2000>;
#clock-cells = <1>;
};
};
/* unremovable emmc as mmcblk0 */
mmc: mmc@1830000 {
compatible = "snps,dw-mshc";
reg = <0x1830000 0x1000>;
interrupts = <0 35 4>;
clocks = <&clock HIX5HD2_MMC_CIU_RST>,
<&clock HIX5HD2_MMC_BIU_CLK>;
clock-names = "biu", "ciu";
};
sd: mmc@1820000 {
compatible = "snps,dw-mshc";
reg = <0x1820000 0x1000>;
interrupts = <0 34 4>;
clocks = <&clock HIX5HD2_SD_CIU_RST>,
<&clock HIX5HD2_SD_BIU_CLK>;
clock-names = "biu", "ciu";
};
gmac0: ethernet@1840000 {
compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
reg = <0x1840000 0x1000>,<0x184300c 0x4>;
interrupts = <0 71 4>;
clocks = <&clock HIX5HD2_MAC0_CLK>;
clock-names = "mac_core";
status = "disabled";
};
gmac1: ethernet@1841000 {
compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
reg = <0x1841000 0x1000>,<0x1843010 0x4>;
interrupts = <0 72 4>;
clocks = <&clock HIX5HD2_MAC1_CLK>;
clock-names = "mac_core";
status = "disabled";
};
usb0: usb@1890000 {
compatible = "generic-ehci";
reg = <0x1890000 0x1000>;
interrupts = <0 66 4>;
clocks = <&clock HIX5HD2_USB_CLK>;
};
usb1: usb@1880000 {
compatible = "generic-ohci";
reg = <0x1880000 0x1000>;
interrupts = <0 67 4>;
clocks = <&clock HIX5HD2_USB_CLK>;
};
peripheral_ctrl: syscon@a20000 {
compatible = "hisilicon,peri-subctrl", "syscon";
reg = <0xa20000 0x1000>;
};
sata_phy: phy@1900000 {
compatible = "hisilicon,hix5hd2-sata-phy";
reg = <0x1900000 0x10000>;
#phy-cells = <0>;
hisilicon,peripheral-syscon = <&peripheral_ctrl>;
hisilicon,power-reg = <0x8 10>;
};
ahci: sata@1900000 {
compatible = "hisilicon,hisi-ahci";
reg = <0x1900000 0x10000>;
interrupts = <0 70 4>;
clocks = <&clock HIX5HD2_SATA_CLK>;
};
ir: ir@1000 {
compatible = "hisilicon,hix5hd2-ir";
reg = <0x001000 0x1000>;
interrupts = <0 47 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
hisilicon,power-syscon = <&sysctrl>;
};
i2c0: i2c@b10000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb10000 0x1000>;
interrupts = <0 38 4>;
clocks = <&clock HIX5HD2_I2C0_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@b11000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb11000 0x1000>;
interrupts = <0 39 4>;
clocks = <&clock HIX5HD2_I2C1_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@b12000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb12000 0x1000>;
interrupts = <0 40 4>;
clocks = <&clock HIX5HD2_I2C2_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@b13000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb13000 0x1000>;
interrupts = <0 41 4>;
clocks = <&clock HIX5HD2_I2C3_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@b16000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb16000 0x1000>;
interrupts = <0 43 4>;
clocks = <&clock HIX5HD2_I2C4_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c5: i2c@b17000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb17000 0x1000>;
interrupts = <0 44 4>;
clocks = <&clock HIX5HD2_I2C5_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
};