// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * ZyXEL NSA310S Board Description * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com> * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com> * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> * Based upon the board setup file created by Peter Schildmann */ /dts-v1/; #include "kirkwood.dtsi" #include "kirkwood-6281.dtsi" #include <dt-bindings/leds/common.h> / { model = "ZyXEL NSA310S"; compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; memory { device_type = "memory"; reg = <0x00000000 0x10000000>; }; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = &uart0; }; gpio_poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_pwr_off>; pinctrl-names = "default"; gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; }; keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; }; copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_leds>; pinctrl-names = "default"; led-1 { function = LED_FUNCTION_DISK_ERR; color = <LED_COLOR_ID_RED>; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; led-2 { function = LED_FUNCTION_USB; color = <LED_COLOR_ID_GREEN>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; linux,default-trigger = "usb-host"; }; led-3 { function = LED_FUNCTION_DISK; color = <LED_COLOR_ID_GREEN>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; linux,default-trigger = "ata1"; }; led-4 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; }; led-5 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_RED>; gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; }; led-6 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; led-7 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; }; usb0_power: regulator@1 { compatible = "regulator-fixed"; regulator-name = "USB Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; sata1_power: regulator@2 { compatible = "regulator-fixed"; regulator-name = "SATA1 Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; }; thermal-zones { disk-thermal { polling-delay = <20000>; polling-delay-passive = <2000>; thermal-sensors = <&hdd_temp>; trips { disk_alert: disk-alert { temperature = <40000>; hysteresis = <5000>; type = "active"; }; disk_crit: disk-crit { temperature = <60000>; hysteresis = <2000>; type = "critical"; }; }; }; }; }; ð0 { status = "okay"; ethernet0-port@0 { phy-handle = <ðphy0>; }; }; &i2c0 { status = "okay"; rtc@68 { compatible = "htk,ht1382"; reg = <0x68>; }; }; &mdio { status = "okay"; ethphy0: ethernet-phy@1 { reg = <1>; phy-mode = "rgmii-id"; marvell,reg-init = <0x1 0x16 0x0 0x3>, <0x1 0x10 0x0 0x1017>, <0x1 0x11 0x0 0x4408>, <0x1 0x16 0x0 0x0>; }; }; &nand { status = "okay"; chip-delay = <35>; partition@0 { label = "uboot"; reg = <0x0000000 0x00c0000>; read-only; }; partition@c0000 { label = "uboot_env"; reg = <0x00c0000 0x0080000>; }; partition@140000 { label = "ubi"; reg = <0x0140000 0x7ec0000>; }; }; &pciec { status = "okay"; }; &pcie0 { status = "okay"; }; &pinctrl { pinctrl-names = "default"; pmx_buttons: pmx-buttons { marvell,pins = "mpp24", "mpp25", "mpp26"; marvell,function = "gpio"; }; pmx_leds: pmx-leds { marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23", "mpp28", "mpp29"; marvell,function = "gpio"; }; pmx_power: pmx-power { marvell,pins = "mpp21", "mpp33"; marvell,function = "gpio"; }; pmx_pwr_off: pmx-pwr-off { marvell,pins = "mpp27"; marvell,function = "gpio"; }; }; &rtc { status = "disabled"; }; &sata { status = "okay"; nr-ports = <1>; #address-cells = <1>; #size-cells = <0>; hdd_temp: sata-port@0 { reg = <0>; #thermal-sensor-cells = <0>; }; }; &uart0 { status = "okay"; };