// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MPC8378E RDB Device Tree Source
*
* Copyright 2007, 2008 Freescale Semiconductor Inc.
*/
/dts-v1/;
/ {
compatible = "fsl,mpc8378rdb";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8378@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>; // 256MB at 0
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
// booting from nand, but the
// addresses are the same.
ranges = <0x0 0x0 0xfe000000 0x00800000
0x1 0x0 0xe0600000 0x00008000
0x2 0x0 0xf0000000 0x00020000
0x3 0x0 0xfa000000 0x00008000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8378-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x8000>;
u-boot@0 {
reg = <0x0 0x100000>;
read-only;
};
kernel@100000 {
reg = <0x100000 0x300000>;
};
fs@400000 {
reg = <0x400000 0x1c00000>;
};
};
};
immr@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
gpio1: gpio-controller@c00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x0c000000>;
ranges;
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 {
compatible = "national,lm75";
reg = <0x48>;
};
at24@50 {
compatible = "atmel,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8378erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
};
sdhci@2e000 {
compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
spi@7000 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
interrupts = <16 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
sleep = <&pmc 0x00c00000>;
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
crypto@30000 {
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
"fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
sleep = <&pmc 0x03000000>;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: interrupt-controller@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
pmc: power@b00 {
compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
};
pci0: pci@e0008500 {
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
/* IDSEL AD14 IRQ6 inta */
0x7000 0x0 0x0 0x1 &ipic 22 0x8
/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
0x7800 0x0 0x0 0x1 &ipic 21 0x8
0x7800 0x0 0x0 0x2 &ipic 22 0x8
0x7800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
0xE000 0x0 0x0 0x1 &ipic 23 0x8
0xE000 0x0 0x0 0x2 &ipic 21 0x8
0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100 /* internal registers */
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci1: pcie@e0009000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
reg = <0xe0009000 0x00001000>;
ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
bus-range = <0 255>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0 0 0 1 &ipic 1 8
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
sleep = <&pmc 0x00300000>;
clock-frequency = <0>;
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
reg = <0 0 0 0 0>;
ranges = <0x02000000 0 0xa8000000
0x02000000 0 0xa8000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00800000>;
};
};
pci2: pcie@e000a000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
reg = <0xe000a000 0x00001000>;
ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
bus-range = <0 255>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0 0 0 1 &ipic 2 8
0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>;
sleep = <&pmc 0x000c0000>;
clock-frequency = <0>;
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
reg = <0 0 0 0 0>;
ranges = <0x02000000 0 0xc8000000
0x02000000 0 0xc8000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00800000>;
};
};
leds {
compatible = "gpio-leds";
pwr {
gpios = <&mcu_pio 0 0>;
default-state = "on";
};
hdd {
gpios = <&mcu_pio 1 0>;
linux,default-trigger = "disk-activity";
};
};
};