// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2025, Teguh Sobirin.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "qcs8550-ayntec-common.dtsi"
&{/} {
model = "AYN Thor";
compatible = "ayntec,thor", "qcom,qcs8550", "qcom,sm8550";
vdd_bl_5v0: vdd-bl-5v0-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_bl_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_disp_1v8: vdd-disp-1v8-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_disp_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_disp1_2v8: vdd-disp1-2v8-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_disp1_2v8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_disp2_2v8: vdd-disp2-2v8-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_disp2_2v8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&tlmm 143 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_ts_3v0: vdd-ts-3v0-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_ts_3v0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&tlmm 144 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_ts_1v8: vdd-ts-1v8-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_ts_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&display_panel {
compatible = "ayntec,thor-panel-top", "chipone,icna3520";
pinctrl-0 = <&dsi_s_rst_active>, <&dsi_s_te_active>;
pinctrl-1 = <&dsi_s_rst_suspend>, <&dsi_s_te_suspend>;
pinctrl-names = "default", "sleep";
vdd-supply = <&vreg_l11b_1p2>;
vddio-supply = <&vreg_l12b_1p8>;
vci-supply = <&vreg_l14b_3p2>;
disp-supply = <&vdd_disp1_2v8>;
blvdd-supply = <&vdd_bl_5v0>;
reset-gpios = <&tlmm 137 GPIO_ACTIVE_LOW>;
rotation = <90>;
};
&gpio_keys {
pinctrl-0 = <&volume_up_n &key_ayn_n>;
key-ayn {
label = "AYN Key";
debounce-interval = <15>;
gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F24>;
linux,can-disable;
};
switch-lid {
label = "Hall Lid Sensor";
gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
wakeup-source;
};
};
&i2c4 {
clock-frequency = <400000>;
status = "okay";
touchscreen@38 {
compatible = "focaltech,ft5426";
reg = <0x38>;
interrupt-parent = <&tlmm>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l14b_3p2>;
iovcc-supply = <&vreg_l12b_1p8>;
pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>;
pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>;
pinctrl-names = "default", "sleep";
touchscreen-size-x = <1080>;
touchscreen-size-y = <1920>;
touchscreen-swapped-x-y;
touchscreen-inverted-x;
};
};
&i2c_hub_3 {
clock-frequency = <100000>;
status = "okay";
touchscreen@38 {
compatible = "focaltech,ft5452";
reg = <0x38>;
interrupt-parent = <&tlmm>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 14 GPIO_ACTIVE_LOW>;
vcc-supply = <&vdd_ts_3v0>;
iovcc-supply = <&vdd_ts_1v8>;
pinctrl-0 = <&ts_s_rst_default &ts_s_int_default>;
pinctrl-1 = <&ts_s_rst_sleep &ts_s_int_sleep>;
pinctrl-names = "default", "sleep";
touchscreen-size-x = <1080>;
touchscreen-size-y = <1240>;
touchscreen-swapped-x-y;
touchscreen-inverted-x;
};
};
&mdss_dsi0 {
vdda-supply = <&vreg_l3e_1p2>;
status = "okay";
panel@0 {
reg = <0>;
compatible = "ayntec,thor-panel-bottom", "chipwealth,ch13726a";
pinctrl-0 = <&dsi_p_rst_active>, <&dsi_p_te_active>;
pinctrl-1 = <&dsi_p_rst_suspend>, <&dsi_p_te_suspend>;
pinctrl-names = "default", "sleep";
vdd1v2-supply = <&vreg_l11b_1p2>;
vddio-supply = <&vdd_disp_1v8>;
vdd-supply = <&vreg_l13b_3p0>;
avdd-supply = <&vdd_disp2_2v8>;
reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
rotation = <90>;
port {
panel0_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
remote-endpoint = <&panel0_in>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
vdds-supply = <&vreg_l1e_0p88>;
status = "okay";
};
&mdss_dsi1_out {
qcom,te-source = "mdp_vsync_s";
};
&pm8550_multi_led {
status = "disabled";
};
&remoteproc_adsp {
firmware-name = "qcom/sm8550/ayntec/thor/adsp.mbn",
"qcom/sm8550/ayntec/thor/adsp_dtb.mbn";
status = "okay";
};
&spk_amp_l {
firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin";
};
&spk_amp_r {
firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin";
};
&tlmm {
key_ayn_n: key-ayn-n-state {
pins = "gpio41";
function = "gpio";
bias-pull-up;
output-disable;
};
};