/* SPDX-License-Identifier: GPL-2.0 */ /* * sbi.h: SBI (Sbus Interface on sun4d) definitions * * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> */ #ifndef _SPARC_SBI_H #define _SPARC_SBI_H #include <asm/obio.h> /* SBI */ struct sbi_regs { /* 0x0000 */ u32 cid; /* Component ID */ /* 0x0004 */ u32 ctl; /* Control */ /* 0x0008 */ u32 status; /* Status */ u32 _unused1; /* 0x0010 */ u32 cfg0; /* Slot0 config reg */ /* 0x0014 */ u32 cfg1; /* Slot1 config reg */ /* 0x0018 */ u32 cfg2; /* Slot2 config reg */ /* 0x001c */ u32 cfg3; /* Slot3 config reg */ /* 0x0020 */ u32 stb0; /* Streaming buf control for slot 0 */ /* 0x0024 */ u32 stb1; /* Streaming buf control for slot 1 */ /* 0x0028 */ u32 stb2; /* Streaming buf control for slot 2 */ /* 0x002c */ u32 stb3; /* Streaming buf control for slot 3 */ /* 0x0030 */ u32 intr_state; /* Interrupt state */ /* 0x0034 */ u32 intr_tid; /* Interrupt target ID */ /* 0x0038 */ u32 intr_diag; /* Interrupt diagnostics */ }; #define SBI_CID 0x02800000 #define SBI_CTL 0x02800004 #define SBI_STATUS 0x02800008 #define SBI_CFG0 0x02800010 #define SBI_CFG1 0x02800014 #define SBI_CFG2 0x02800018 #define SBI_CFG3 0x0280001c #define SBI_STB0 0x02800020 #define SBI_STB1 0x02800024 #define SBI_STB2 0x02800028 #define SBI_STB3 0x0280002c #define SBI_INTR_STATE 0x02800030 #define SBI_INTR_TID 0x02800034 #define SBI_INTR_DIAG 0x02800038 /* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */ #define SBI_CFG_BURST_MASK 0x0000001e /* How to make devid from sbi no */ #define SBI2DEVID(sbino) ((sbino<<4)|2) /* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level * * +-------+-------+-------+-------+-------+-------+-------+-------+ * SBUS IRQ LEVEL | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser | * SLOT # |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0| ved | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+ * Bits 31 27 23 19 15 11 7 3 0 */ #ifndef __ASSEMBLY__ static inline int acquire_sbi(int devid, int mask) { __asm__ __volatile__ ("swapa [%2] %3, %0" : "=r" (mask) : "0" (mask), "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), "i" (ASI_M_CTL)); return mask; } static inline void release_sbi(int devid, int mask) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (mask), "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), "i" (ASI_M_CTL)); } static inline void set_sbi_tid(int devid, int targetid) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (targetid), "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID), "i" (ASI_M_CTL)); } static inline int get_sbi_ctl(int devid, int cfgno) { int cfg; __asm__ __volatile__ ("lda [%1] %2, %0" : "=r" (cfg) : "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), "i" (ASI_M_CTL)); return cfg; } static inline void set_sbi_ctl(int devid, int cfgno, int cfg) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (cfg), "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), "i" (ASI_M_CTL)); } #endif /* !__ASSEMBLY__ */ #endif /* !(_SPARC_SBI_H) */