// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (c) 2023, Linaro Ltd
*
* Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
*/
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32764>;
#clock-cells = <0>;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
clocks = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
};
domain-idle-states {
CLUSTER_SLEEP: cluster-sleep-0 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x41000043>;
entry-latency-us = <800>;
exit-latency-us = <2118>;
min-residency-us = <7376>;
};
};
idle-states {
entry-method = "psci";
CPU_SLEEP: cpu-sleep-0 {
compatible = "arm,idle-state";
idle-state-name = "power-collapse";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <290>;
exit-latency-us = <376>;
min-residency-us = <1182>;
local-timer-stop;
};
};
};
firmware {
scm: scm {
compatible = "qcom,scm-qcm2290", "qcom,scm";
clocks = <&rpmcc RPM_SMD_CE1_CLK>;
clock-names = "core";
#reset-cells = <1>;
};
};
memory@40000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0 0x40000000 0 0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP>;
};
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP>;
};
CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP>;
};
CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP>;
};
CLUSTER_PD: power-domain-cpu-cluster {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_SLEEP>;
};
};
rpm: remoteproc {
compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-qcm2290";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,qcm2290-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_min_svs: opp1 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp2 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp4 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp5 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp7 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: hyp@45700000 {
reg = <0x0 0x45700000 0x0 0x600000>;
no-map;
};
xbl_aop_mem: xbl-aop@45e00000 {
reg = <0x0 0x45e00000 0x0 0x140000>;
no-map;
};
sec_apps_mem: sec-apps@45fff000 {
reg = <0x0 0x45fff000 0x0 0x1000>;
no-map;
};
smem_mem: smem@46000000 {
compatible = "qcom,smem";
reg = <0x0 0x46000000 0x0 0x200000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
};
pil_modem_mem: modem@4ab00000 {
reg = <0x0 0x4ab00000 0x0 0x6900000>;
no-map;
};
pil_video_mem: video@51400000 {
reg = <0x0 0x51400000 0x0 0x500000>;
no-map;
};
wlan_msa_mem: wlan-msa@51900000 {
reg = <0x0 0x51900000 0x0 0x100000>;
no-map;
};
pil_adsp_mem: adsp@51a00000 {
reg = <0x0 0x51a00000 0x0 0x1c00000>;
no-map;
};
pil_ipa_fw_mem: ipa-fw@53600000 {
reg = <0x0 0x53600000 0x0 0x10000>;
no-map;
};
pil_ipa_gsi_mem: ipa-gsi@53610000 {
reg = <0x0 0x53610000 0x0 0x5000>;
no-map;
};
pil_gpu_mem: zap@53615000 {
compatible = "shared-dma-pool";
reg = <0x0 0x53615000 0x0 0x2000>;
no-map;
};
cont_splash_memory: framebuffer@5c000000 {
reg = <0x0 0x5c000000 0x0 0x00f00000>;
no-map;
};
dfps_data_memory: dpfs-data@5cf00000 {
reg = <0x0 0x5cf00000 0x0 0x0100000>;
no-map;
};
removed_mem: reserved@60000000 {
reg = <0x0 0x60000000 0x0 0x3900000>;
no-map;
};
rmtfs_mem: memory@89b01000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x89b01000 0x0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
};
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
wlan_smp2p_in: wlan-wpss-to-ap {
qcom,entry-name = "wlan";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
dma-ranges = <0 0 0 0 0x10 0>;
tcsr_mutex: hwlock@340000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x00340000 0x0 0x20000>;
#hwlock-cells = <1>;
};
tlmm: pinctrl@500000 {
compatible = "qcom,qcm2290-tlmm";
reg = <0x0 0x00500000 0x0 0x300000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 127>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
qup_i2c0_default: qup-i2c0-default-state {
pins = "gpio0", "gpio1";
function = "qup0";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c1_default: qup-i2c1-default-state {
pins = "gpio4", "gpio5";
function = "qup1";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c2_default: qup-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "qup2";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c3_default: qup-i2c3-default-state {
pins = "gpio8", "gpio9";
function = "qup3";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c4_default: qup-i2c4-default-state {
pins = "gpio12", "gpio13";
function = "qup4";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c5_default: qup-i2c5-default-state {
pins = "gpio14", "gpio15";
function = "qup5";
drive-strength = <2>;
bias-pull-up;
};
qup_spi0_default: qup-spi0-default-state {
pins = "gpio0", "gpio1","gpio2", "gpio3";
function = "qup0";
drive-strength = <2>;
bias-pull-up;
};
qup_spi1_default: qup-spi1-default-state {
pins = "gpio4", "gpio5", "gpio69", "gpio70";
function = "qup1";
drive-strength = <2>;
bias-pull-up;
};
qup_spi2_default: qup-spi2-default-state {
pins = "gpio6", "gpio7", "gpio71", "gpio80";
function = "qup2";
drive-strength = <2>;
bias-pull-up;
};
qup_spi3_default: qup-spi3-default-state {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "qup3";
drive-strength = <2>;
bias-pull-up;
};
qup_spi4_default: qup-spi4-default-state {
pins = "gpio12", "gpio13", "gpio96", "gpio97";
function = "qup4";
drive-strength = <2>;
bias-pull-up;
};
qup_spi5_default: qup-spi5-default-state {
pins = "gpio14", "gpio15", "gpio16", "gpio17";
function = "qup5";
drive-strength = <2>;
bias-pull-up;
};
qup_uart0_default: qup-uart0-default-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "qup0";
drive-strength = <2>;
bias-disable;
};
qup_uart4_default: qup-uart4-default-state {
pins = "gpio12", "gpio13";
function = "qup4";
drive-strength = <2>;
bias-disable;
};
sdc1_state_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-pins {
pins = "sdc1_cmd";
drive-strength = <10>;
bias-pull-up;
};
data-pins {
pins = "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_state_off: sdc1-off-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <2>;
bias-disable;
};
cmd-pins {
pins = "sdc1_cmd";
drive-strength = <2>;
bias-pull-up;
};
data-pins {
pins = "sdc1_data";
drive-strength = <2>;
bias-pull-up;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc2_state_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <10>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_state_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <2>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <2>;
bias-pull-up;
};
};
};
gcc: clock-controller@1400000 {
compatible = "qcom,gcc-qcm2290";
reg = <0x0 0x01400000 0x0 0x1f0000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
usb_hsphy: phy@1613000 {
compatible = "qcom,qcm2290-qusb2-phy";
reg = <0x0 0x01613000 0x0 0x180>;
clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2_hstx_trim>;
#phy-cells = <0>;
status = "disabled";
};
usb_qmpphy: phy@1615000 {
compatible = "qcom,qcm2290-qmp-usb3-phy";
reg = <0x0 0x01615000 0x0 0x1000>;
clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "cfg_ahb",
"ref",
"com_aux",
"pipe";
resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
<&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
reset-names = "phy",
"phy_phy";
#clock-cells = <0>;
clock-output-names = "usb3_phy_pipe_clk_src";
#phy-cells = <0>;
status = "disabled";
};
qfprom@1b44000 {
compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
reg = <0x0 0x01b44000 0x0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
qusb2_hstx_trim: hstx-trim@25b {
reg = <0x25b 0x1>;
bits = <1 4>;
};
};
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x01c40000 0x0 0x1100>,
<0x0 0x01e00000 0x0 0x2000000>,
<0x0 0x03e00000 0x0 0x100000>,
<0x0 0x03f00000 0x0 0xa0000>,
<0x0 0x01c0a000 0x0 0x26000>;
reg-names = "core",
"chnls",
"obsrvr",
"intr",
"cnfg";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
tsens0: thermal-sensor@4411000 {
compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
reg = <0x0 0x04411000 0x0 0x1ff>,
<0x0 0x04410000 0x0 0x8>;
#qcom,sensors = <10>;
interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
rng: rng@4453000 {
compatible = "qcom,prng-ee";
reg = <0x0 0x04453000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
clock-names = "core";
};
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x0 0x045f0000 0x0 0x7000>;
};
sram@4690000 {
compatible = "qcom,rpm-stats";
reg = <0x0 0x04690000 0x0 0x10000>;
};
sdhc_1: mmc@4744000 {
compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0 0x04744000 0x0 0x1000>,
<0x0 0x04745000 0x0 0x1000>,
<0x0 0x04748000 0x0 0x8000>;
reg-names = "hc",
"cqhci",
"ice";
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
clock-names = "iface",
"core",
"xo",
"ice";
resets = <&gcc GCC_SDCC1_BCR>;
power-domains = <&rpmpd QCM2290_VDDCX>;
iommus = <&apps_smmu 0xc0 0x0>;
qcom,dll-config = <0x000f642c>;
qcom,ddr-config = <0x80040868>;
bus-width = <8>;
status = "disabled";
};
sdhc_2: mmc@4784000 {
compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0 0x04784000 0x0 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface",
"core",
"xo";
resets = <&gcc GCC_SDCC2_BCR>;
power-domains = <&rpmpd QCM2290_VDDCX>;
operating-points-v2 = <&sdhc2_opp_table>;
iommus = <&apps_smmu 0xa0 0x0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
bus-width = <4>;
status = "disabled";
sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmpd_opp_svs_plus>;
};
};
};
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
reg = <0x0 0x04a00000 0x0 0x60000>;
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <10>;
dma-channel-mask = <0x1f>;
iommus = <&apps_smmu 0xf6 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_0: geniqup@4ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x04ac0000 0x0 0x2000>;
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
iommus = <&apps_smmu 0xe3 0x0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
i2c0: i2c@4a80000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a80000 0x0 0x4000>;
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c0_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi0: spi@4a80000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x04a80000 0x0 0x4000>;
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_spi0_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart0: serial@4a80000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x04a80000 0x0 0x4000>;
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_uart0_default>;
pinctrl-names = "default";
status = "disabled";
};
i2c1: i2c@4a84000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a84000 0x0 0x4000>;
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c1_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@4a84000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x04a84000 0x0 0x4000>;
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_spi1_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@4a88000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a88000 0x0 0x4000>;
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c2_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@4a88000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x04a88000 0x0 0x4000>;
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_spi2_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@4a8c000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a8c000 0x0 0x4000>;
interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c3_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi3: spi@4a8c000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x04a8c000 0x0 0x4000>;
interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_spi3_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a90000 0x0 0x4000>;
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c4_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi4: spi@4a90000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x04a90000 0x0 0x4000>;
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi4_default>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart4: serial@4a90000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x04a90000 0x0 0x4000>;
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_uart4_default>;
pinctrl-names = "default";
status = "disabled";
};
i2c5: i2c@4a94000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a94000 0x0 0x4000>;
interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c5_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi5: spi@4a94000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x04a94000 0x0 0x4000>;
interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_spi5_default>;
pinctrl-names = "default";
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
usb: usb@4ef8800 {
compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
reg = <0x0 0x04ef8800 0x0 0x400>;
interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq";
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi",
"xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <133333333>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
wakeup-source;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
usb_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
reg = <0x0 0x04e00000 0x0 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
iommus = <&apps_smmu 0x120 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
dr_mode = "otg";
};
};
remoteproc_mpss: remoteproc@6080000 {
compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
reg = <0x0 0x06080000 0x0 0x100>;
interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog",
"fatal",
"ready",
"handover",
"stop-ack",
"shutdown-ack";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
power-domains = <&rpmpd QCM2290_VDDCX>;
memory-region = <&pil_modem_mem>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
label = "mpss";
qcom,remote-pid = <1>;
mboxes = <&apcs_glb 12>;
};
};
remoteproc_adsp: remoteproc@ab00000 {
compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
reg = <0x0 0x0ab00000 0x0 0x100>;
interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog",
"fatal",
"ready",
"handover",
"stop-ack";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
<&rpmpd QCM2290_VDD_LPI_MX>;
memory-region = <&pil_adsp_mem>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
qcom,remote-pid = <2>;
mboxes = <&apcs_glb 8>;
};
};
apps_smmu: iommu@c600000 {
compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x0 0x0c600000 0x0 0x80000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
};
wifi: wifi@c800000 {
compatible = "qcom,wcn3990-wifi";
reg = <0x0 0x0c800000 0x0 0x800000>;
reg-names = "membase";
memory-region = <&wlan_msa_mem>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x1a0 0x1>;
qcom,msa-fixed-perm;
status = "disabled";
};
watchdog@f017000 {
compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
reg = <0x0 0x0f017000 0x0 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sleep_clk>;
};
apcs_glb: mailbox@f111000 {
compatible = "qcom,qcm2290-apcs-hmss-global";
reg = <0x0 0x0f111000 0x0 0x1000>;
#mbox-cells = <1>;
};
timer@f120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x0f120000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x0f121000 0x8000>;
frame@0 {
reg = <0x0 0x1000>,
<0x1000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <0>;
};
frame@2000 {
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <1>;
status = "disabled";
};
frame@3000 {
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <2>;
status = "disabled";
};
frame@4000 {
reg = <0x4000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <3>;
status = "disabled";
};
frame@5000 {
reg = <0x5000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <4>;
status = "disabled";
};
frame@6000 {
reg = <0x6000 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <5>;
status = "disabled";
};
frame@7000 {
reg = <0x7000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <6>;
status = "disabled";
};
};
intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
reg = <0x0 0x0f200000 0x0 0x10000>,
<0x0 0x0f300000 0x0 0x100000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x20000>;
};
cpufreq_hw: cpufreq@f521000 {
compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
reg = <0x0 0x0f521000 0x0 0x1000>;
reg-names = "freq-domain0";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dcvsh-irq-0";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
#clock-cells = <1>;
};
};
thermal-zones {
mapss-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 0>;
trips {
mapss_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
mapss_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
mapss_crit: mapss-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
video-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
trips {
video_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
video_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
video_crit: video-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
wlan-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
trips {
wlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
wlan_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
wlan_crit: wlan-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpuss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
trips {
cpuss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpuss0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpuss0_crit: cpuss0-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpuss1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
trips {
cpuss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpuss1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpuss1_crit: cpuss1-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
mdm0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
trips {
mdm0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
mdm0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
mdm0_crit: mdm0-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
mdm1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
trips {
mdm1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
mdm1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
mdm1_crit: mdm1-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
gpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
trips {
gpu_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
gpu_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
gpu_crit: gpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
hm-center-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
trips {
hm_center_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
hm_center_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
hm_center_crit: hm-center-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
camera-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
trips {
camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
camera_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
camera_crit: camera-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};