# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas MSIOF SPI controller maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> allOf: - $ref: spi-controller.yaml# properties: compatible: oneOf: - items: - const: renesas,msiof-sh73a0 # SH-Mobile AG5 - const: renesas,sh-mobile-msiof # generic SH-Mobile compatible # device - items: - enum: - renesas,msiof-r8a7742 # RZ/G1H - renesas,msiof-r8a7743 # RZ/G1M - renesas,msiof-r8a7744 # RZ/G1N - renesas,msiof-r8a7745 # RZ/G1E - renesas,msiof-r8a77470 # RZ/G1C - renesas,msiof-r8a7790 # R-Car H2 - renesas,msiof-r8a7791 # R-Car M2-W - renesas,msiof-r8a7792 # R-Car V2H - renesas,msiof-r8a7793 # R-Car M2-N - renesas,msiof-r8a7794 # R-Car E2 - const: renesas,rcar-gen2-msiof # generic R-Car Gen2 and RZ/G1 # compatible device - items: - enum: - renesas,msiof-r8a774a1 # RZ/G2M - renesas,msiof-r8a774b1 # RZ/G2N - renesas,msiof-r8a774c0 # RZ/G2E - renesas,msiof-r8a774e1 # RZ/G2H - renesas,msiof-r8a7795 # R-Car H3 - renesas,msiof-r8a7796 # R-Car M3-W - renesas,msiof-r8a77961 # R-Car M3-W+ - renesas,msiof-r8a77965 # R-Car M3-N - renesas,msiof-r8a77970 # R-Car V3M - renesas,msiof-r8a77980 # R-Car V3H - renesas,msiof-r8a77990 # R-Car E3 - renesas,msiof-r8a77995 # R-Car D3 - const: renesas,rcar-gen3-msiof # generic R-Car Gen3 and RZ/G2 # compatible device - items: - enum: - renesas,msiof-r8a779a0 # R-Car V3U - renesas,msiof-r8a779f0 # R-Car S4-8 - renesas,msiof-r8a779g0 # R-Car V4H - const: renesas,rcar-gen4-msiof # generic R-Car Gen4 # compatible device - items: - const: renesas,sh-msiof # deprecated reg: minItems: 1 maxItems: 2 oneOf: - items: - description: CPU and DMA engine registers - items: - description: CPU registers - description: DMA engine registers interrupts: maxItems: 1 clocks: maxItems: 1 power-domains: maxItems: 1 resets: maxItems: 1 num-cs: description: | Total number of chip selects (default is 1). Up to 3 native chip selects are supported: 0: MSIOF_SYNC 1: MSIOF_SS1 2: MSIOF_SS2 Hardware limitations related to chip selects: - Native chip selects are always deasserted in between transfers that are part of the same message. Use cs-gpios to work around this. - All slaves using native chip selects must use the same spi-cs-high configuration. Use cs-gpios to work around this. - When using GPIO chip selects, at least one native chip select must be left unused, as it will be driven anyway. minimum: 1 maximum: 3 default: 1 dmas: minItems: 2 maxItems: 4 dma-names: minItems: 2 maxItems: 4 items: enum: [ tx, rx ] renesas,dtdl: description: delay sync signal (setup) in transmit mode. $ref: /schemas/types.yaml#/definitions/uint32 enum: - 0 # no bit delay - 50 # 0.5-clock-cycle delay - 100 # 1-clock-cycle delay - 150 # 1.5-clock-cycle delay - 200 # 2-clock-cycle delay renesas,syncdl: description: delay sync signal (hold) in transmit mode $ref: /schemas/types.yaml#/definitions/uint32 enum: - 0 # no bit delay - 50 # 0.5-clock-cycle delay - 100 # 1-clock-cycle delay - 150 # 1.5-clock-cycle delay - 200 # 2-clock-cycle delay - 300 # 3-clock-cycle delay renesas,tx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default TX fifo size. Unit is words. Ignored if 0. $ref: /schemas/types.yaml#/definitions/uint32 default: 64 renesas,rx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default RX fifo size. Unit is words. Ignored if 0. $ref: /schemas/types.yaml#/definitions/uint32 default: 64 required: - compatible - reg - interrupts - clocks - power-domains - '#address-cells' - '#size-cells' if: not: properties: compatible: contains: const: renesas,sh-mobile-msiof then: required: - resets unevaluatedProperties: false examples: - | #include <dt-bindings/clock/r8a7791-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7791-sysc.h> msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof"; reg = <0xe6e20000 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 000>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 0>; #address-cells = <1>; #size-cells = <0>; };