// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include "rk3528-nanopi.dtsi"
/ {
model = "FriendlyElec NanoPi Zero2";
compatible = "friendlyarm,nanopi-zero2", "rockchip,rk3528";
adc-keys-1 {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
button-recovery {
label = "RECOVERY";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <0>;
};
};
vcc0v6_ddr: regulator-0v6-vcc-ddr {
compatible = "regulator-fixed";
regulator-name = "vcc0v6_ddr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <600000>;
vin-supply = <&vcc5v0_sys>;
};
usb2_host_5v: regulator-5v0-usb2-host {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host1_pwren>;
regulator-name = "usb2_host_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&led1 {
default-state = "on";
function = LED_FUNCTION_STATUS;
linux,default-trigger = "default-on";
};
&pinctrl {
usb {
usb20_host1_pwren: usb20-host1-pwren {
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
extcon = <&usb2phy>;
maximum-speed = "high-speed";
phys = <&usb2phy_otg>;
phy-names = "usb2-phy";
status = "okay";
};
&usb2phy {
status = "okay";
};
&usb2phy_host {
phy-supply = <&usb2_host_5v>;
status = "okay";
};
&usb2phy_otg {
status = "okay";
};