# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cirrus Logic CS42L43 Audio CODEC

maintainers:
  - patches@opensource.cirrus.com

description: |
  The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
  (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
  for portable applications. It provides a high dynamic range, stereo
  DAC for headphone output, two integrated Class D amplifiers for
  loudspeakers, and two ADCs for wired headset microphone input or
  stereo line input. PDM inputs are provided for digital microphones.
  CS42L43B variant adds dedicated PDM interface, SoundWire Clock Gearing
  support and more decimators to ISRCs.

allOf:
  - $ref: dai-common.yaml#

properties:
  compatible:
    enum:
      - cirrus,cs42l43
      - cirrus,cs42l43b
      - cirrus,cs42l44

  reg:
    maxItems: 1

  vdd-p-supply:
    description:
      Power supply for the high voltage interface.

  vdd-a-supply:
    description:
      Power supply for internal analog circuits.

  vdd-d-supply:
    description:
      Power supply for internal digital circuits. Can be internally supplied.

  vdd-io-supply:
    description:
      Power supply for external interface and internal digital logic.

  vdd-cp-supply:
    description:
      Power supply for the amplifier 3 and 4 charge pump.

  vdd-amp-supply:
    description:
      Power supply for amplifier 1 and 2.

  reset-gpios:
    maxItems: 1

  interrupt-controller: true

  "#interrupt-cells":
    const: 2

  interrupts:
    maxItems: 1

  "#sound-dai-cells":
    const: 1

  clocks:
    items:
      - description: Synchronous audio clock provided on mclk_in.

  clock-names:
    const: mclk

  cirrus,bias-low:
    type: boolean
    description:
      Select a 1.8V headset micbias rather than 2.8V.

  cirrus,bias-sense-microamp:
    description:
      Current at which the headset micbias sense clamp will engage, 0 to
      disable.
    enum: [ 0, 14, 24, 43, 52, 61, 71, 90, 99 ]
    default: 14

  cirrus,bias-ramp-ms:
    description:
      Time in milliseconds the hardware allows for the headset micbias to
      ramp up.
    enum: [ 10, 40, 90, 170 ]
    default: 170

  cirrus,detect-us:
    description:
      Time in microseconds the type detection will run for. Long values will
      cause more audible effects, but give more accurate detection.
    enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ]
    default: 1000

  cirrus,button-automute:
    type: boolean
    description:
      Enable the hardware automuting of decimator 1 when a headset button is
      pressed.

  cirrus,buttons-ohms:
    description:
      Impedance in Ohms for each headset button, these should be listed in
      ascending order.
    minItems: 1
    maxItems: 6

  cirrus,tip-debounce-ms:
    description:
      Software debounce on tip sense triggering in milliseconds.
    default: 0

  cirrus,tip-invert:
    type: boolean
    description:
      Indicates tip detect polarity, inverted implies open-circuit whilst the
      jack is inserted.

  cirrus,tip-disable-pullup:
    type: boolean
    description:
      Indicates if the internal pullup on the tip detect should be disabled.

  cirrus,tip-fall-db-ms:
    description:
      Time in milliseconds a falling edge on the tip detect should be hardware
      debounced for. Note the falling edge is considered after the invert.
    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
    default: 500

  cirrus,tip-rise-db-ms:
    description:
      Time in milliseconds a rising edge on the tip detect should be hardware
      debounced for. Note the rising edge is considered after the invert.
    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
    default: 500

  cirrus,use-ring-sense:
    type: boolean
    description:
      Indicates if the ring sense should be used.

  cirrus,ring-invert:
    type: boolean
    description:
      Indicates ring detect polarity, inverted implies open-circuit whilst the
      jack is inserted.

  cirrus,ring-disable-pullup:
    type: boolean
    description:
      Indicates if the internal pullup on the ring detect should be disabled.

  cirrus,ring-fall-db-ms:
    description:
      Time in milliseconds a falling edge on the ring detect should be hardware
      debounced for. Note the falling edge is considered after the invert.
    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
    default: 500

  cirrus,ring-rise-db-ms:
    description:
      Time in milliseconds a rising edge on the ring detect should be hardware
      debounced for. Note the rising edge is considered after the invert.
    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
    default: 500

  pinctrl:
    type: object
    $ref: /schemas/pinctrl/pinctrl.yaml#
    additionalProperties: false

    properties:
      gpio-controller: true

      "#gpio-cells":
        const: 2

      gpio-ranges:
        items:
          - items:
              - description: A phandle to the CODEC pinctrl node
                minimum: 0
              - const: 0
              - const: 0
              - const: 3

    patternProperties:
      "-state$":
        oneOf:
          - $ref: "#/$defs/cirrus-cs42l43-state"
          - patternProperties:
              "-pins$":
                $ref: "#/$defs/cirrus-cs42l43-state"
            additionalProperties: false

  spi:
    type: object
    $ref: /schemas/spi/spi-controller.yaml#
    unevaluatedProperties: false

$defs:
  cirrus-cs42l43-state:
    type: object

    allOf:
      - $ref: /schemas/pinctrl/pincfg-node.yaml#
      - $ref: /schemas/pinctrl/pinmux-node.yaml#

    oneOf:
      - required: [ groups ]
      - required: [ pins ]

    additionalProperties: false

    properties:
      groups:
        enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ]

      pins:
        enum: [ gpio1, gpio2, gpio3,
                asp_dout, asp_fsync, asp_bclk,
                pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data,
                i2c_sda, i2c_scl,
                spi_miso, spi_sck, spi_ssb ]

      function:
        enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ]

      drive-strength:
        description: Set drive strength in mA
        enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ]

      input-debounce:
        description: Set input debounce in uS
        enum: [ 0, 85 ]

required:
  - compatible
  - reg
  - vdd-p-supply
  - vdd-a-supply
  - vdd-io-supply
  - vdd-cp-supply

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        cs42l43: codec@1a {
            compatible = "cirrus,cs42l43";
            reg = <0x1a>;

            vdd-p-supply = <&vdd5v0>;
            vdd-a-supply = <&vdd1v8>;
            vdd-io-supply = <&vdd1v8>;
            vdd-cp-supply = <&vdd1v8>;
            vdd-amp-supply = <&vdd5v0>;

            reset-gpios = <&gpio 0>;

            interrupt-controller;
            #interrupt-cells = <2>;
            interrupt-parent = <&gpio>;
            interrupts = <56 IRQ_TYPE_LEVEL_LOW>;

            #sound-dai-cells = <1>;

            clocks = <&clks 0>;
            clock-names = "mclk";

            cs42l43_pins: pinctrl {
                gpio-controller;
                #gpio-cells = <2>;
                gpio-ranges = <&cs42l43_pins 0 0 3>;

                pinctrl-names = "default";
                pinctrl-0 = <&pinsettings>;

                pinsettings: default-state {
                    shutter-pins {
                        groups = "gpio3";
                        function = "mic-shutter";
                    };
                };
            };

            spi {
                #address-cells = <1>;
                #size-cells = <0>;

                cs-gpios = <&cs42l43_pins 1 0>;

                sensor@0 {
                    compatible = "bosch,bme680";
                    reg = <0>;
                    spi-max-frequency = <1400000>;
                };
            };
        };
    };