// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ingenic,jz4770-cgu.h>
#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ingenic,jz4770";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "ingenic,xburst-fpu1.0-mxu1.1";
reg = <0>;
clocks = <&cgu JZ4770_CLK_CCLK>;
clock-names = "cpu";
};
};
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
intc: interrupt-controller@10001000 {
compatible = "ingenic,jz4770-intc";
reg = <0x10001000 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
ext: ext {
compatible = "fixed-clock";
#clock-cells = <0>;
};
osc32k: osc32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
cgu: jz4770-cgu@10000000 {
compatible = "ingenic,jz4770-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
otg_phy: usb-phy@3c {
compatible = "ingenic,jz4770-phy";
reg = <0x3c 0x10>;
clocks = <&cgu JZ4770_CLK_OTG_PHY>;
#phy-cells = <0>;
};
};
tcu: timer@10002000 {
compatible = "ingenic,jz4770-tcu", "simple-mfd";
reg = <0x10002000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x10002000 0x1000>;
#clock-cells = <1>;
clocks = <&cgu JZ4770_CLK_RTC>,
<&cgu JZ4770_CLK_EXT>,
<&cgu JZ4770_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&intc>;
interrupts = <27 26 25>;
watchdog: watchdog@0 {
compatible = "ingenic,jz4770-watchdog",
"ingenic,jz4740-watchdog";
reg = <0x0 0xc>;
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
pwm: pwm@40 {
compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
reg = <0x40 0x80>;
#pwm-cells = <3>;
clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
<&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
<&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
<&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
clock-names = "timer0", "timer1", "timer2", "timer3",
"timer4", "timer5", "timer6", "timer7";
};
ost: timer@e0 {
compatible = "ingenic,jz4770-ost";
reg = <0xe0 0x20>;
clocks = <&tcu TCU_CLK_OST>;
clock-names = "ost";
interrupts = <15>;
};
};
rtc: rtc@10003000 {
compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
reg = <0x10003000 0x40>;
interrupt-parent = <&intc>;
interrupts = <32>;
};
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
gpa: gpio@0 {
compatible = "ingenic,jz4770-gpio";
reg = <0>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <17>;
};
gpb: gpio@1 {
compatible = "ingenic,jz4770-gpio";
reg = <1>;
gpio-controller;
gpio-ranges = <&pinctrl 0 32 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <16>;
};
gpc: gpio@2 {
compatible = "ingenic,jz4770-gpio";
reg = <2>;
gpio-controller;
gpio-ranges = <&pinctrl 0 64 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <15>;
};
gpd: gpio@3 {
compatible = "ingenic,jz4770-gpio";
reg = <3>;
gpio-controller;
gpio-ranges = <&pinctrl 0 96 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <14>;
};
gpe: gpio@4 {
compatible = "ingenic,jz4770-gpio";
reg = <4>;
gpio-controller;
gpio-ranges = <&pinctrl 0 128 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <13>;
};
gpf: gpio@5 {
compatible = "ingenic,jz4770-gpio";
reg = <5>;
gpio-controller;
gpio-ranges = <&pinctrl 0 160 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <12>;
};
};
aic: audio-controller@10020000 {
compatible = "ingenic,jz4770-i2s";
reg = <0x10020000 0x94>;
#sound-dai-cells = <0>;
clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>;
clock-names = "aic", "i2s";
interrupt-parent = <&intc>;
interrupts = <34>;
dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
dma-names = "rx", "tx";
};
codec: audio-codec@100200a0 {
compatible = "ingenic,jz4770-codec";
reg = <0x100200a4 0x8>;
#sound-dai-cells = <0>;
clocks = <&cgu JZ4770_CLK_AIC>;
clock-names = "aic";
};
mmc0: mmc@10021000 {
compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
reg = <0x10021000 0x1000>;
clocks = <&cgu JZ4770_CLK_MMC0>;
clock-names = "mmc";
interrupt-parent = <&intc>;
interrupts = <37>;
dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
dma-names = "rx", "tx";
cap-sd-highspeed;
cap-mmc-highspeed;
cap-sdio-irq;
status = "disabled";
};
mmc1: mmc@10022000 {
compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
reg = <0x10022000 0x1000>;
clocks = <&cgu JZ4770_CLK_MMC1>;
clock-names = "mmc";
interrupt-parent = <&intc>;
interrupts = <36>;
dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
dma-names = "rx", "tx";
cap-sd-highspeed;
cap-mmc-highspeed;
cap-sdio-irq;
status = "disabled";
};
mmc2: mmc@10023000 {
compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
reg = <0x10023000 0x1000>;
clocks = <&cgu JZ4770_CLK_MMC2>;
clock-names = "mmc";
interrupt-parent = <&intc>;
interrupts = <35>;
dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
dma-names = "rx", "tx";
cap-sd-highspeed;
cap-mmc-highspeed;
cap-sdio-irq;
status = "disabled";
};
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <5>;
status = "disabled";
};
uart1: serial@10031000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10031000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <4>;
status = "disabled";
};
uart2: serial@10032000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10032000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <3>;
status = "disabled";
};
uart3: serial@10033000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10033000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <2>;
status = "disabled";
};
adc: adc@10070000 {
compatible = "ingenic,jz4770-adc";
reg = <0x10070000 0x30>;
#io-channel-cells = <1>;
clocks = <&cgu JZ4770_CLK_ADC>;
clock-names = "adc";
interrupt-parent = <&intc>;
interrupts = <18>;
};
gpu: gpu@13040000 {
compatible = "vivante,gc";
reg = <0x13040000 0x10000>;
clocks = <&cgu JZ4770_CLK_GPU>,
<&cgu JZ4770_CLK_GPU>,
<&cgu JZ4770_CLK_GPU>;
clock-names = "bus", "core", "shader";
interrupt-parent = <&intc>;
interrupts = <6>;
};
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4770-lcd";
reg = <0x13050000 0x130>; /* tbc */
interrupt-parent = <&intc>;
interrupts = <31>;
clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
clock-names = "lcd_pclk";
};
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
reg = <0x13420000 0xC0>, <0x13420300 0x20>;
#dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <24>;
};
dmac1: dma-controller@13420100 {
compatible = "ingenic,jz4770-dma";
reg = <0x13420100 0xC0>, <0x13420400 0x20>;
#dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <23>;
};
uhc: usb@13430000 {
compatible = "generic-ohci";
reg = <0x13430000 0x1000>;
clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
assigned-clocks = <&cgu JZ4770_CLK_UHC>;
assigned-clock-rates = <48000000>;
interrupt-parent = <&intc>;
interrupts = <20>;
status = "disabled";
};
usb_otg: usb@13440000 {
compatible = "ingenic,jz4770-musb";
reg = <0x13440000 0x10000>;
clocks = <&cgu JZ4770_CLK_OTG>;
clock-names = "udc";
interrupt-parent = <&intc>;
interrupts = <21>;
interrupt-names = "mc";
phys = <&otg_phy>;
usb-role-switch;
};
rom: memory@1fc00000 {
compatible = "mtd-rom";
probe-type = "map_rom";
reg = <0x1fc00000 0x2000>;
bank-width = <4>;
device-width = <1>;
};
};