// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ingenic,jz4740-cgu.h>
#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ingenic,jz4740";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "ingenic,xburst-mxu1.0";
reg = <0>;
clocks = <&cgu JZ4740_CLK_CCLK>;
clock-names = "cpu";
};
};
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
intc: interrupt-controller@10001000 {
compatible = "ingenic,jz4740-intc";
reg = <0x10001000 0x14>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
ext: ext {
compatible = "fixed-clock";
#clock-cells = <0>;
};
rtc: rtc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
cgu: jz4740-cgu@10000000 {
compatible = "ingenic,jz4740-cgu";
reg = <0x10000000 0x100>;
clocks = <&ext>, <&rtc>;
clock-names = "ext", "rtc";
#clock-cells = <1>;
};
tcu: timer@10002000 {
compatible = "ingenic,jz4740-tcu", "simple-mfd";
reg = <0x10002000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x10002000 0x1000>;
#clock-cells = <1>;
clocks = <&cgu JZ4740_CLK_RTC>,
<&cgu JZ4740_CLK_EXT>,
<&cgu JZ4740_CLK_PCLK>,
<&cgu JZ4740_CLK_TCU>;
clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&intc>;
interrupts = <23 22 21>;
watchdog: watchdog@0 {
compatible = "ingenic,jz4740-watchdog";
reg = <0x0 0xc>;
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
pwm: pwm@40 {
compatible = "ingenic,jz4740-pwm";
reg = <0x40 0x80>;
#pwm-cells = <3>;
clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
<&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
<&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
<&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
clock-names = "timer0", "timer1", "timer2", "timer3",
"timer4", "timer5", "timer6", "timer7";
};
};
rtc_dev: rtc@10003000 {
compatible = "ingenic,jz4740-rtc";
reg = <0x10003000 0x40>;
interrupt-parent = <&intc>;
interrupts = <15>;
clocks = <&cgu JZ4740_CLK_RTC>;
clock-names = "rtc";
};
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4740-pinctrl";
reg = <0x10010000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
gpa: gpio@0 {
compatible = "ingenic,jz4740-gpio";
reg = <0>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <28>;
};
gpb: gpio@1 {
compatible = "ingenic,jz4740-gpio";
reg = <1>;
gpio-controller;
gpio-ranges = <&pinctrl 0 32 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <27>;
};
gpc: gpio@2 {
compatible = "ingenic,jz4740-gpio";
reg = <2>;
gpio-controller;
gpio-ranges = <&pinctrl 0 64 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <26>;
};
gpd: gpio@3 {
compatible = "ingenic,jz4740-gpio";
reg = <3>;
gpio-controller;
gpio-ranges = <&pinctrl 0 96 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <25>;
};
};
aic: audio-controller@10020000 {
compatible = "ingenic,jz4740-i2s";
reg = <0x10020000 0x38>;
#sound-dai-cells = <0>;
interrupt-parent = <&intc>;
interrupts = <18>;
clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>;
clock-names = "aic", "i2s";
dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
dma-names = "rx", "tx";
};
codec: audio-codec@100200a4 {
compatible = "ingenic,jz4740-codec";
reg = <0x10020080 0x8>;
#sound-dai-cells = <0>;
clocks = <&cgu JZ4740_CLK_AIC>;
clock-names = "aic";
};
mmc: mmc@10021000 {
compatible = "ingenic,jz4740-mmc";
reg = <0x10021000 0x1000>;
clocks = <&cgu JZ4740_CLK_MMC>;
clock-names = "mmc";
interrupt-parent = <&intc>;
interrupts = <14>;
dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
dma-names = "rx", "tx";
cap-sd-highspeed;
cap-mmc-highspeed;
cap-sdio-irq;
};
uart0: serial@10030000 {
compatible = "ingenic,jz4740-uart";
reg = <0x10030000 0x100>;
interrupt-parent = <&intc>;
interrupts = <9>;
clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
clock-names = "baud", "module";
};
uart1: serial@10031000 {
compatible = "ingenic,jz4740-uart";
reg = <0x10031000 0x100>;
interrupt-parent = <&intc>;
interrupts = <8>;
clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
clock-names = "baud", "module";
};
adc: adc@10070000 {
compatible = "ingenic,jz4740-adc";
reg = <0x10070000 0x30>;
#io-channel-cells = <1>;
clocks = <&cgu JZ4740_CLK_ADC>;
clock-names = "adc";
interrupt-parent = <&intc>;
interrupts = <12>;
};
nemc: memory-controller@13010000 {
compatible = "ingenic,jz4740-nemc";
reg = <0x13010000 0x54>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <1 0 0x18000000 0x4000000>,
<2 0 0x14000000 0x4000000>,
<3 0 0x0c000000 0x4000000>,
<4 0 0x08000000 0x4000000>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
ecc: ecc-controller@13010100 {
compatible = "ingenic,jz4740-ecc";
reg = <0x13010100 0x2C>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
dmac: dma-controller@13020000 {
compatible = "ingenic,jz4740-dma";
reg = <0x13020000 0xbc>, <0x13020300 0x14>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <20>;
clocks = <&cgu JZ4740_CLK_DMA>;
};
uhc: usb@13030000 {
compatible = "ingenic,jz4740-ohci", "generic-ohci";
reg = <0x13030000 0x1000>;
clocks = <&cgu JZ4740_CLK_UHC>;
assigned-clocks = <&cgu JZ4740_CLK_UHC>;
assigned-clock-rates = <48000000>;
interrupt-parent = <&intc>;
interrupts = <3>;
status = "disabled";
};
udc: usb@13040000 {
compatible = "ingenic,jz4740-musb";
reg = <0x13040000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <24>;
interrupt-names = "mc";
clocks = <&cgu JZ4740_CLK_UDC>;
clock-names = "udc";
};
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4740-lcd";
reg = <0x13050000 0x60>; /* LCDCMD1+4 */
interrupt-parent = <&intc>;
interrupts = <30>;
clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
clock-names = "lcd_pclk", "lcd";
};
};