============================== MPI Header File Change History ============================== Copyright (c) 2000-2008 LSI Corporation. --------------------------------------- Header Set Release Version: 01.05.19 Header Set Release Date: 03-28-08 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- mpi.h 01.05.16 01.05.15 mpi_ioc.h 01.05.16 01.05.15 mpi_cnfg.h 01.05.18 01.05.17 mpi_init.h 01.05.09 01.05.09 mpi_targ.h 01.05.06 01.05.06 mpi_fc.h 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 mpi_raid.h 01.05.05 01.05.05 mpi_tool.h 01.05.03 01.05.03 mpi_inb.h 01.05.01 01.05.01 mpi_sas.h 01.05.05 01.05.05 mpi_type.h 01.05.02 01.05.02 mpi_history.txt 01.05.19 01.05.18 * Date Version Description * -------- -------- ------------------------------------------------------ mpi.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition. * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR. * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions. * Removed LAN_SUSPEND function definition. * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition. * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition. * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros. * 07-27-00 01.00.04 Added MPI_FAULT_ definitions. * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions. * Added MPI_IOCSTATUS_INTERNAL_ERROR definition. * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH. * 11-02-00 01.01.01 Original release for post 1.0 work * 12-04-00 01.01.02 Added new function codes. * 01-09-01 01.01.03 Added more definitions to the system interface section * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT. * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01. * 02-20-01 01.01.05 Started using MPI_POINTER. * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and * MPI_DIAG_CLEAR_FLASH_BAD_SIG. * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines. * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define. * Added function codes for RAID. * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, * MPI_DOORBELL_USED, to better match the spec. * 08-08-01 01.02.01 Original release for v1.2 work. * Changed MPI_VERSION_MINOR from 0x01 to 0x02. * Added define MPI_FUNCTION_TOOLBOX. * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR. * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR. * 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines. * 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT. * 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX. * 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT. * 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX. * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value. * 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT. * 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST * and MPI_FUNCTION_DIAG_RELEASE. * Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define. * Bumped MPI_HEADER_VERSION_UNIT value. * 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3. * Added codes for Inband. * 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell. * Added define for offset of High Priority Request Queue. * Added new function codes and new IOCStatus codes. * Added a IOCLogInfo type of SAS. * 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT. * 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT. * 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT. * 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT. * 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT. * 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and * TargetAssistExtended requests. * Removed EEDP IOCStatus codes. * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and * TargetAssistExtended requests. * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT. * 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT. * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT. * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT. * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- mpi_ioc.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure. * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY. * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure. * Added _MSG_EVENT_ACK_REPLY structure. * Added _MSG_FW_DOWNLOAD_REPLY structure. * Added _MSG_TOOLBOX_REPLY structure. * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure. * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI, * _LINK_STATUS, _LOOP_STATE and _LOGOUT. * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in * _MSG_EVENT_ACK_REPLY structure to match specification. * 11-02-00 01.01.01 Original release for post 1.0 work * Added a value for Manufacturer to WhoInit * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and * removed toolbox message. * 01-09-01 01.01.03 Added event enabled and disabled defines. * Added structures for FwHeader and DataHeader. * Added ImageType to FwUpload reply. * 02-20-01 01.01.04 Started using MPI_POINTER. * 02-27-01 01.01.05 Added event for RAID status change and its event data. * Added IocNumber field to MSG_IOC_FACTS_REPLY. * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER. * Added structure offset comments. * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE. * 08-08-01 01.02.01 Original release for v1.2 work. * New format for FWVersion and ProductId in * MSG_IOC_FACTS_REPLY and MPI_FW_HEADER. * 08-31-01 01.02.02 Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and * related structure and defines. * Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED. * Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE. * Replaced a reserved field in MSG_IOC_FACTS_REPLY with * IOCExceptions and changed DataImageSize to reserved. * Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and * MPI_FW_UPLOAD_ITYPE_NVDATA. * 09-28-01 01.02.03 Modified Event Data for Integrated RAID. * 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field. * 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY. * 05-31-02 01.02.06 Added define for * MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID. * Added AliasIndex to EVENT_DATA_LOGOUT structure. * 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_. * 06-26-03 01.02.08 Added new values to the product family defines. * 04-29-04 01.02.09 Added IOCCapabilities field to MSG_IOC_FACTS_REPLY and * added related defines. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Added four new fields to MSG_IOC_INIT. * Added three new fields to MSG_IOC_FACTS_REPLY. * Defined four new bits for the IOCCapabilities field of * the IOCFacts reply. * Added two new PortTypes for the PortFacts reply. * Added six new events along with their EventData * structures. * Added a new MsgFlag to the FwDownload request to * indicate last segment. * Defined a new image type of boot loader. * Added FW family codes for SAS product families. * 10-05-04 01.05.02 Added ReplyFifoHostSignalingAddr field to * MSG_IOC_FACTS_REPLY. * 12-07-04 01.05.03 Added more defines for SAS Discovery Error event. * 12-09-04 01.05.04 Added Unsupported device to SAS Device event. * 01-15-05 01.05.05 Added event data for SAS SES Event. * 02-09-05 01.05.06 Added MPI_FW_UPLOAD_ITYPE_FW_BACKUP define. * 02-22-05 01.05.07 Added Host Page Buffer Persistent flag to IOC Facts * Reply and IOC Init Request. * 03-11-05 01.05.08 Added family code for 1068E family. * Removed IOCFacts Reply EEDP Capability bit. * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits. * Added Max SATA Targets to SAS Discovery Error event. * 08-30-05 01.05.10 Added 4 new events and their event data structures. * Added new ReasonCode value for SAS Device Status Change * event. * Added new family code for FC949E. * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR. * Added additional Reason Codes and more event data fields * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE. * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and * new event. * Added MPI_EVENT_SAS_SMP_ERROR and event data structure. * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event * data structure. * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event * data structure. * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION. * 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED. * Added MaxInitiators field to PortFacts reply. * Added SAS Device Status Change ReasonCode for * asynchronous notification. * Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event * data structure. * Added new ImageType values for FWDownload and FWUpload * requests. * 02-28-07 01.05.13 Added MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT for SAS * Broadcast Event Data (replacing _RESERVED2). * For Discovery Error Event Data DiscoveryStatus field, * replaced _MULTPL_PATHS with _UNSUPPORTED_DEVICE and * added _MULTI_PORT_DOMAIN. * 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request. * Added Common Boot Block type to FWUpload Request. * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define. * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data. * Added SASAddress field to SAS Initiator Device Table * Overflow event data structure. * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status * Change Event data to indicate completion of internally * generated task management. * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define. * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define. * -------------------------------------------------------------------------- mpi_cnfg.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 * fields to FC_DEVICE_0 page, updated the page version. * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages * and updated the page versions. * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 * page and updated the page version. * Added Information field and _INFO_PARAMS_NEGOTIATED * definitionto SCSI_DEVICE_0 page. * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the * page version. * Added BucketsRemaining to LAN_1 page, redefined the * state values, and updated the page version. * Revised bus width definitions in SCSI_PORT_0, * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page * version. * Moved FC_DEVICE_0 PageAddress description to spec. * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field * widths in IOC_0 page and updated the page version. * 11-02-00 01.01.01 Original release for post 1.0 work * Added Manufacturing pages, IO Unit Page 2, SCSI SPI * Port Page 2, FC Port Page 4, FC Port Page 5 * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. * 12-05-00 01.01.04 Modified config page actions. * 01-09-01 01.01.05 Added defines for page address formats. * Data size for Manufacturing pages 2 and 3 no longer * defined here. * Io Unit Page 2 size is fixed at 4 adapters and some * flags were changed. * SCSI Port Page 2 Device Settings modified. * New fields added to FC Port Page 0 and some flags * cleaned up. * Removed impedance flash from FC Port Page 1. * Added FC Port pages 6 and 7. * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. * Added some LinkType defines for FcPortPage0. * 02-20-01 01.01.08 Started using MPI_POINTER. * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with * MPI_CONFIG_PAGETYPE_RAID_VOLUME. * Added definitions and structures for IOC Page 2 and * RAID Volume Page 2. * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. * Added VendorId and ProductRevLevel fields to * RAIDVOL2_IM_PHYS_ID struct. * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ * defines to make them compatible to MPI version 1.0. * Added structure offset comments. * 04-09-01 01.01.11 Added some new defines for the PageAddress field and * removed some obsolete ones. * Added IO Unit Page 3. * Modified defines for Scsi Port Page 2. * Modified RAID Volume Pages. * 08-08-01 01.02.01 Original release for v1.2 work. * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. * Added defines for the SEP bits in RVP2 VolumeSettings. * Modified the DeviceSettings field in RVP2 to use the * proper structure. * Added defines for SES, SAF-TE, and cross channel for * IOCPage2 CapabilitiesFlags. * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. * Removed define for * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. * Added rejected bits to SCSI Device Page 0 Information. * Increased size of ALPA array in FC Port Page 2 by one * and removed a one byte reserved field. * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. * Added structures for Manufacturing Page 4, IO Unit * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and * RAID PhysDisk Page 0. * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. * Modified some of the new defines to make them 32 * character unique. * Modified how variable length pages (arrays) are defined. * Added generic defines for hot spare pools and RAID * volume types. * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with * related define, and bumped the page version define. * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a * reserved byte and added a define. * Added define for * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. * Added new config page: CONFIG_PAGE_IOC_5. * Added MaxAliases, MaxHardAliases, and NumCurrentAliases * fields to CONFIG_PAGE_FC_PORT_0. * Added AltConnector and NumRequestedAliases fields to * CONFIG_PAGE_FC_PORT_1. * Added new config page: CONFIG_PAGE_FC_PORT_10. * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. * Added additional MPI_SCSIDEVPAGE0_NP_ defines. * Added more MPI_SCSIDEVPAGE1_RP_ defines. * Added define for * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. * Modified MPI_FCPORTPAGE5_FLAGS_ defines. * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for * CONFIG_PAGE_FC_PORT_1. * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable * an alias. * Added more device id defines. * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. * Added TargetConfig and IDConfig fields to * CONFIG_PAGE_SCSI_PORT_1. * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 * to control DV. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field * with ADISCHardALPA. * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout * fields and related defines to CONFIG_PAGE_FC_PORT_1. * Added define for * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. * Added new fields to the substructures of * CONFIG_PAGE_FC_PORT_10. * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, * CONFIG_PAGE_SCSI_DEVICE_0, and * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for * these pages. * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config * pages. * Added a new structure for extended config page header. * Added new extended config pages types and structures for * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 * to add a Flags field. * Two new Manufacturing config pages (5 and 6). * Two new bits defined for IO Unit Page 1 Flags field. * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields * to specify the BIOS boot device. * Four new Flags bits defined for IO Unit Page 2. * Added IO Unit Page 4. * Added EEDP Flags settings to IOC Page 1. * Added new BIOS Page 1 config page. * 10-05-04 01.05.02 Added define for * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and * associated defines. * Added more defines for SAS IO Unit Page 0 * DiscoveryStatus field. * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. * Added defines for Physical Mapping Modes to SAS IO Unit * Page 2. * Added define for * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. * Added defines for MaxTargetSpinUp to BIOS Page 1. * Added 5 new ControlFlags defines for SAS IO Unit * Page 1. * Added MaxNumPhysicalMappedIDs field to SAS IO Unit * Page 2. * Added AccessStatus field to SAS Device Page 0 and added * new Flags bits for supported SATA features. * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID * Volume Page 1, and RAID Physical Disk Page 1. * Replaced IO Unit Page 1 BootTargetID,BootBus, and * BootAdapterNum with reserved field. * Added DataScrubRate and ResyncRate to RAID Volume * Page 0. * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT * define. * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 * Flags field. * Added Auto Port Config flag define for SAS IOUNIT * Page 1 ControlFlags. * Added Disabled bad Phy define to Expander Page 1 * Discovery Info field. * Added SAS/SATA device support to SAS IOUnit Page 1 * ControlFlags. * Added Unsupported device to SAS Dev Page 0 Flags field * Added disable use SATA Hash Address for SAS IOUNIT * page 1 in ControlFields. * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to * Manufacturing Page 4. * Added new defines for BIOS Page 1 IOCSettings field. * Added ExtDiskIdentifier field to RAID Physical Disk * Page 0. * Added new defines for SAS IO Unit Page 1 ControlFlags * and to SAS Device Page 0 Flags to control SATA devices. * Added defines and structures for the new Log Page 0, a * new type of configuration page. * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. * Added WWID field to RAID Volume Page 1. * Added PhysicalPort field to SAS Expander pages 0 and 1. * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. * Added Enclosure/Slot boot device format to BIOS Page 2. * New status value for RAID Volume Page 0 VolumeStatus * (VolumeState subfield). * New value for RAID Physical Page 0 InactiveStatus. * Added Inactive Volume Member flag RAID Physical Disk * Page 0 PhysDiskStatus field. * New physical mapping mode in SAS IO Unit Page 2. * Added CONFIG_PAGE_SAS_ENCLOSURE_0. * Added Slot and Enclosure fields to SAS Device Page 0. * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1. * Added more RAID type defines to IOC Page 2. * Added Port Enable Delay settings to BIOS Page 1. * Added Bad Block Table Full define to RAID Volume Page 0. * Added Previous State defines to RAID Physical Disk * Page 0. * Added Max Sata Targets define for DiscoveryStatus field * of SAS IO Unit Page 0. * Added Device Self Test to Control Flags of SAS IO Unit * Page 1. * Added Direct Attach Starting Slot Number define for SAS * IO Unit Page 2. * Added new fields in SAS Device Page 2 for enclosure * mapping. * Added OwnerDevHandle and Flags field to SAS PHY Page 0. * Added IOC GPIO Flags define to SAS Enclosure Page 0. * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from * Manufacturing Page 4. * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit. * Added NumDevsPerEnclosure field to SAS IO Unit page 2. * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP * define. * Added EnclosureHandle field to SAS Expander page 0. * Removed redundant NumTableEntriesProg field from SAS * Expander Page 1. * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for * SAS1078. * Added more defines for Manufacturing Page 4 Flags field. * Added more defines for IOCSettings and added * ExpanderSpinup field to Bios Page 1. * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. * Added Manufacturing Page 7. * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. * Added IOC Page 6. * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. * Added MaxLBAHigh field to RAID Volume Page 0. * Added Nvdata version fields to SAS IO Unit Page 0. * Added AdditionalControlFlags, MaxTargetPortConnectTime, * ReportDeviceMissingDelay, and IODeviceMissingDelay * fields to SAS IO Unit Page 1. * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to * Manufacturing Page 5. * Added Manufacturing pages 8 through 10. * Added defines for supported metadata size bits in * CapabilitiesFlags field of IOC Page 6. * Added defines for metadata size bits in VolumeSettings * field of RAID Volume Page 0. * Added SATA Link Reset settings, Enable SATA Asynchronous * Notification bit, and HideNonZeroAttachedPhyIdentifiers * bit to AdditionalControlFlags field of SAS IO Unit * Page 1. * Added defines for Enclosure Devices Unmapped and * Device Limit Exceeded bits in Status field of SAS IO * Unit Page 2. * Added more AccessStatus values for SAS Device Page 0. * Added bit for SATA Asynchronous Notification Support in * Flags field of SAS Device Page 0. * 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4. * Added Disable SMART Polling for CapabilitiesFlags of * IOC Page 6. * Added Disable SMART Polling to DeviceSettings of BIOS * Page 1. * Added Multi-Port Domain bit for DiscoveryStatus field * of SAS IO Unit Page. * Added Multi-Port Domain Illegal flag for SAS IO Unit * Page 1 AdditionalControlFlags field. * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID * Metadata bit to Manufacturing Page 4 ExtFlags field. * Added Internal Connector to End Device Present bit to * Expander Page 0 Flags field. * Fixed define for * MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED. * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT * define. * Added BIOS Page 4 structure. * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID * Physical Disk Page 1. * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of * Manufacturing Page 4. * Added Solid State Drives Supported bit to IOC Page 6 * Capabilities Flags. * Added new value for AccessStatus field of SAS Device * Page 0 (_SATA_NEEDS_INITIALIZATION). * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field * to control coercion size and the mixing of SAS and SATA * SSD drives. * -------------------------------------------------------------------------- mpi_init.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions. * 11-02-00 01.01.01 Original release for post 1.0 work * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT. * 02-20-01 01.01.03 Started using MPI_POINTER. * 03-27-01 01.01.04 Added structure offset comments. * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT. * 08-08-01 01.02.01 Original release for v1.2 work. * 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET. * Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for * MSG_SCSI_IO_REPLY. * 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure * Processor messages. * 10-04-01 01.02.04 Added defines for SEP request Action field. * 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define * for SCSI IO requests. * 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP. * 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request. * Added new word to MSG_SCSI_IO_REPLY to add TaskTag field * and a reserved U16. * Added new MSG_SCSI_IO32_REQUEST structure. * Added a TaskType of Clear Task Set to SCSI * Task Management request. * 12-07-04 01.05.02 Added support for Task Management Query Task. * 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support * WWID addressing. * 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request. * Removed SCSI IO 32 Request. * Modified SCSI Enclosure Processor Request and Reply to * support Enclosure/Slot addressing rather than WWID * addressing. * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines. * Added four new defines for SEP SlotStatus. * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them * unique in the first 32 characters. * 03-27-06 01.05.07 Added Task Management type of Clear ACA. * 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA. * 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management * Request: Do Not Send Task IU and Soft Reset Option. * -------------------------------------------------------------------------- mpi_targ.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure. * Corrected DECSRIPTOR typo to DESCRIPTOR. * 11-02-00 01.01.01 Original release for post 1.0 work * Modified target mode to use IoIndex instead of * HostIndex and IocIndex. Added Alias. * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER. * 02-20-01 01.01.03 Started using MPI_POINTER. * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and * MPI_TARGET_FCP_CMD_BUFFER. * 03-27-01 01.01.04 Added structure offset comments. * 08-08-01 01.02.01 Original release for v1.2 work. * 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU. * Added PriorityReason field to some replies and * defined more PriorityReason codes. * Added some defines for to support previous version * of MPI. * 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY. * 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY. * 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper * byte ordering. * 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include * one bit. * Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER. * 09-16-02 01.02.07 Added flags for confirmed completion. * Added PRIORITY_REASON_TARGET_BUSY. * 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER. * 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Added new request message structures for * MSG_TARGET_CMD_BUF_POST_BASE_REQUEST, * MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and * MSG_TARGET_ASSIST_EXT_REQUEST. * Added new structures for SAS SSP Command buffer, SSP * Task buffer, and SSP Status IU. * 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added. * 02-22-05 01.05.03 Changed a comment. * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. * 03-27-06 01.05.06 Added a comment. * -------------------------------------------------------------------------- mpi_fc.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure. * 11-02-00 01.01.01 Original release for post 1.0 work * 12-04-00 01.01.02 Added messages for Common Transport Send and * Primitive Send. * 01-09-01 01.01.03 Modified some of the new flags to have an MPI prefix * and modified the FcPrimitiveSend flags. * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger * field. * Added FC_ABORT_TYPE_CT_SEND_REQUEST and * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request. * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND. * 02-20-01 01.01.05 Started using MPI_POINTER. * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED. * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define. * Added structure offset comments. * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST. * 08-08-01 01.02.01 Original release for v1.2 work. * 09-28-01 01.02.02 Change name of reserved field in * MSG_LINK_SERVICE_RSP_REPLY. * 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests. * 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- mpi_lan.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY. * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY. * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions. * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec. * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal. * Changed transaction context usage to bucket/buffer. * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition * to lan private header file * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Started using MPI_POINTER. * 03-27-01 01.01.03 Added structure offset comments. * 08-08-01 01.02.01 Original release for v1.2 work. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- mpi_raid.h * 02-27-01 01.01.01 Original release for this file. * 03-27-01 01.01.02 Added structure offset comments. * 08-08-01 01.02.01 Original release for v1.2 work. * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. * 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes. * 10-04-01 01.02.03 Added ActionData defines for * MPI_RAID_ACTION_DELETE_VOLUME action. * 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC. * 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT. * 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME, * MPI_RAID_ACTION_INACTIVATE_VOLUME, and * MPI_RAID_ACTION_ADATA_INACTIVATE_ALL. * 07-12-02 01.02.07 Added structures for Mailbox request and reply. * 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST. * 04-01-03 01.02.09 New action data option flag for * MPI_RAID_ACTION_DELETE_VOLUME. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. * 01-15-05 01.05.02 Added defines for the two new RAID Actions for * _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE. * 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and * associated defines. * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME. * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME. * -------------------------------------------------------------------------- mpi_tool.h * 08-08-01 01.02.01 Original release. * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. * 01-16-04 01.02.03 Added defines and structures for new tools *. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and * MPI_TOOLBOX_FC_MANAGEMENT_TOOL. * 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and * Diagnostic Release requests and replies. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. * 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT. * 02-09-05 01.05.03 Added frame size option to FC management tool. * Added Beacon tool to the Toolbox. * -------------------------------------------------------------------------- mpi_inb.h * 05-11-04 01.03.01 Original release. * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- mpi_sas.h * 08-19-04 01.05.01 Original release. * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, * and Remove Device operations to SAS IO Unit Control. * Added DevHandle field to SAS IO Unit Control request and * reply. * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO * Unit Control request. * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER, * including adding IOCParameter and IOCParameter value * fields to SAS IO Unit Control Request. * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define. * -------------------------------------------------------------------------- mpi_type.h * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. * 08-08-01 01.02.01 Original release for v1.2 work. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. * 08-30-05 01.05.02 Added PowerPC option to #ifdef's. * -------------------------------------------------------------------------- mpi_history.txt Parts list history Filename 01.05.19 01.05.18 01.05.17 01.05.16 01.05.15 ---------- -------- -------- -------- -------- -------- mpi.h 01.05.16 01.05.15 01.05.14 01.05.13 01.05.12 mpi_ioc.h 01.05.16 01.05.15 01.05.15 01.05.14 01.05.13 mpi_cnfg.h 01.05.18 01.05.17 01.05.16 01.05.15 01.05.14 mpi_init.h 01.05.09 01.05.09 01.05.09 01.05.09 01.05.09 mpi_targ.h 01.05.06 01.05.06 01.05.06 01.05.06 01.05.06 mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_raid.h 01.05.05 01.05.05 01.05.04 01.05.03 01.05.03 mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_sas.h 01.05.05 01.05.05 01.05.04 01.05.04 01.05.04 mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 Filename 01.05.14 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07 mpi_ioc.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08 mpi_cnfg.h 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 mpi_init.h 01.05.08 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04 mpi_targ.h 01.05.06 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04 mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_sas.h 01.05.04 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01 mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01 Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02 01.05.01 mpi_ioc.h 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02 mpi_cnfg.h 01.05.07 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 mpi_init.h 01.05.03 01.05.03 01.05.03 01.05.02 01.05.02 01.05.01 mpi_targ.h 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01 mpi_tool.h 01.05.03 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02 mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_sas.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 mpi_type.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 Filename 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.05.01 01.05.01 01.03.01 01.02.12 01.02.11 01.02.10 mpi_ioc.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.08 01.02.08 mpi_cnfg.h 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12 mpi_init.h 01.05.01 01.05.01 01.03.01 01.02.07 01.02.07 01.02.07 mpi_targ.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09 mpi_fc.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.04 01.02.03 mpi_lan.h 01.05.01 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01 mpi_raid.h 01.05.01 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09 mpi_tool.h 01.05.02 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01 mpi_inb.h 01.05.01 01.05.01 01.03.01 mpi_sas.h 01.05.01 01.05.01 mpi_type.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.03 01.02.02 Filename 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.05 01.02.04 mpi_ioc.h 01.02.07 01.02.06 01.02.06 01.02.06 01.02.06 01.02.05 mpi_cnfg.h 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06 mpi_init.h 01.02.06 01.02.06 01.02.05 01.02.05 01.02.05 01.02.04 mpi_targ.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.06 01.02.05 mpi_fc.h 01.02.03 01.02.03 01.02.03 01.02.03 01.02.03 01.02.02 mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 mpi_raid.h 01.02.09 01.02.08 01.02.07 01.02.07 01.02.06 01.02.05 mpi_tool.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02 Filename 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.10 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.02.03 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07 mpi_ioc.h 01.02.04 01.02.03 01.02.03 01.02.02 01.02.01 01.01.07 mpi_cnfg.h 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.11 mpi_init.h 01.02.04 01.02.04 01.02.03 01.02.02 01.02.01 01.01.05 mpi_targ.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.04 mpi_fc.h 01.02.02 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07 mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.01.03 mpi_raid.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.02 mpi_tool.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01 mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01 01.01.02 Filename 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 01.01.04 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.01.06 01.01.06 01.01.05 01.01.04 01.01.04 01.01.03 mpi_ioc.h 01.01.06 01.01.05 01.01.04 01.01.03 01.01.03 01.01.03 mpi_cnfg.h 01.01.10 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 mpi_init.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02 mpi_targ.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02 mpi_fc.h 01.01.06 01.01.05 01.01.05 01.01.04 01.01.04 01.01.03 mpi_lan.h 01.01.03 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01 mpi_raid.h 01.01.02 01.01.01 mpi_type.h 01.01.02 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01 Filename 01.01.03 01.01.02 01.01.01 01.00.07 01.00.06 01.00.05 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.01.02 01.01.02 01.01.01 01.00.04 01.00.04 01.00.03 mpi_ioc.h 01.01.02 01.01.02 01.01.01 01.00.05 01.00.04 01.00.03 mpi_cnfg.h 01.01.04 01.01.03 01.01.01 01.00.05 01.00.05 01.00.04 mpi_init.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02 mpi_targ.h 01.01.01 01.01.01 01.01.01 01.00.02 01.00.02 01.00.02 mpi_fc.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02 mpi_lan.h 01.01.01 01.01.01 01.01.01 01.00.05 01.00.05 01.00.05 mpi_type.h 01.01.01 01.01.01 01.01.01 01.00.01 01.00.01 01.00.01 Filename 01.00.04 01.00.03 01.00.02 01.00.01 00.10.02 00.10.01 ---------- -------- -------- -------- -------- -------- -------- mpi.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.02 00.10.01 mpi_ioc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01 mpi_cnfg.h 01.00.03 01.00.02 01.00.02 01.00.01 00.10.01 00.10.01 mpi_init.h 01.00.02 01.00.02 01.00.02 01.00.01 00.10.02 00.10.01 mpi_targ.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01 mpi_fc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.01 00.10.01 mpi_lan.h 01.00.03 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01 mpi_type.h 01.00.01 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01 * --------------------------------------------------------------------------