# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/microchip,mcp9982.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip MCP998X/33 and MCP998XD/33D Temperature Monitor

maintainers:
  - Victor Duicu <victor.duicu@microchip.com>

description: |
  The MCP998X/33 and MCP998XD/33D family is a high-accuracy 2-wire
  multichannel automotive temperature monitor.
  The datasheet can be found here:
    https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP998X-Family-Data-Sheet-DS20006827.pdf

properties:
  compatible:
    enum:
      - microchip,mcp9933
      - microchip,mcp9933d
      - microchip,mcp9982
      - microchip,mcp9982d
      - microchip,mcp9983
      - microchip,mcp9983d
      - microchip,mcp9984
      - microchip,mcp9984d
      - microchip,mcp9985
      - microchip,mcp9985d

  reg:
    maxItems: 1

  interrupts:
    minItems: 1
    maxItems: 2

  interrupt-names:
    description:
      The chip family has three different interrupt pins divided among them.
      The chips without "D" have alert-therm and therm-addr.
      The chips with "D" have alert-therm and sys-shtdwn.
    minItems: 1
    items:
      - enum: [alert-therm, therm-addr, sys-shtdwn]
      - enum: [therm-addr, sys-shtdwn]

  "#address-cells":
    const: 1

  "#size-cells":
    const: 0

  microchip,enable-anti-parallel:
    description:
      Enable anti-parallel diode mode operation.
      MCP9984/84D/85/85D and MCP9933/33D support reading two external diodes
      in anti-parallel connection on the same set of pins.
    type: boolean

  microchip,parasitic-res-on-channel1-2:
    description:
      Indicates that the chip and the diodes/transistors are sufficiently far
      apart that a parasitic resistance is added to the wires, which can affect
      the measurements. Due to the anti-parallel diode connections, channels
      1 and 2 are affected together.
    type: boolean

  microchip,parasitic-res-on-channel3-4:
    description:
      Indicates that the chip and the diodes/transistors are sufficiently far
      apart that a parasitic resistance is added to the wires, which can affect
      the measurements. Due to the anti-parallel diode connections, channels
      3 and 4 are affected together.
    type: boolean

  microchip,power-state:
    description:
      The chip can be set in Run state or Standby state. In Run state the ADC
      is converting on all channels at the programmed conversion rate.
      In Standby state the host must initiate a conversion cycle by writing
      to the One-Shot register.
      True value sets Run state.
      Chips with "D" in the name can only be set in Run mode.
    type: boolean

  vdd-supply: true

patternProperties:
  "^channel@[1-4]$":
    description:
      Represents the external temperature channels to which
      a remote diode is connected.
    type: object

    properties:
      reg:
        items:
          maxItems: 1

      label:
        description: Unique name to identify which channel this is.

    required:
      - reg

    additionalProperties: false

required:
  - compatible
  - reg
  - vdd-supply

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - microchip,mcp9982d
              - microchip,mcp9983d
              - microchip,mcp9984d
              - microchip,mcp9985d
              - microchip,mcp9933d
    then:
      properties:
        interrupt-names:
          items:
            enum:
              - alert-therm
              - sys-shtdwn
      required:
        - microchip,power-state
        - microchip,parasitic-res-on-channel1-2
    else:
      properties:
        microchip,power-state: true
        interrupt-names:
          items:
            enum:
              - alert-therm
              - therm-addr

  - if:
      properties:
        compatible:
          contains:
            enum:
              - microchip,mcp9983d
              - microchip,mcp9984d
              - microchip,mcp9985d
    then:
      required:
        - microchip,parasitic-res-on-channel3-4

  - if:
      properties:
        compatible:
          contains:
            enum:
              - microchip,mcp9982
              - microchip,mcp9982d
    then:
      properties:
        microchip,enable-anti-parallel: false
      patternProperties:
        "^channel@[2-4]$": false

  - if:
      properties:
        compatible:
          contains:
            enum:
              - microchip,mcp9983
              - microchip,mcp9983d
    then:
      properties:
        microchip,enable-anti-parallel: false
      patternProperties:
        "^channel@[3-4]$": false

  - if:
      properties:
        compatible:
          contains:
            enum:
              - microchip,mcp9933
              - microchip,mcp9933d
    then:
      patternProperties:
        "^channel@[3-4]$": false

  - if:
      properties:
        compatible:
          contains:
            enum:
              - microchip,mcp9984
              - microchip,mcp9984d
    then:
      properties:
        channel@4: false

additionalProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        temperature-sensor@4c {
            compatible = "microchip,mcp9985";
            reg = <0x4c>;

            #address-cells = <1>;
            #size-cells = <0>;

            microchip,enable-anti-parallel;
            microchip,parasitic-res-on-channel1-2;
            microchip,parasitic-res-on-channel3-4;
            vdd-supply = <&vdd>;

            channel@1 {
                reg = <1>;
                label = "Room Temperature";
            };

            channel@2 {
                reg = <2>;
                label = "GPU Temperature";
            };
        };
    };

...