// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (c) 2026 SpacemiT (Hangzhou) Technology Co. Ltd
* Copyright (c) 2026 Guodong Xu <guodong@riscstar.com>
*/
#include <dt-bindings/gpio/gpio.h>
#include "k3.dtsi"
#include "k3-pinctrl.dtsi"
/ {
model = "SpacemiT K3 Pico-ITX";
compatible = "spacemit,k3-pico-itx", "spacemit,k3";
aliases {
ethernet0 = ð0;
i2c2 = &i2c2;
i2c8 = &i2c8;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@100000000 {
device_type = "memory";
reg = <0x1 0x00000000 0x4 0x00000000>;
};
reg_aux_vcc3v3: regulator-aux-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "AUX_VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_aux_vcc5v: regulator-aux-vcc5v {
compatible = "regulator-fixed";
regulator-name = "AUX_VCC5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
rfkill-pcie-wlan {
compatible = "rfkill-gpio";
label = "rfkill-pcie-wlan";
radio-type = "wlan";
shutdown-gpios = <&gpio 1 3 GPIO_ACTIVE_HIGH>;
};
rfkill-usb-bt {
compatible = "rfkill-gpio";
label = "rfkill-usb-bt";
radio-type = "bluetooth";
shutdown-gpios = <&gpio 0 30 GPIO_ACTIVE_HIGH>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_1_cfg>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <8>;
read-only;
size = <256>;
status = "okay";
nvmem-layout {
compatible = "onie,tlv-layout";
mac-address {
#nvmem-cell-cells = <1>;
};
num-macs {
};
part-number {
};
product-name {
};
serial-number {
};
};
};
};
&i2c8 {
pinctrl-names = "default";
pinctrl-0 = <&i2c8_cfg>;
status = "okay";
p1@41 {
compatible = "spacemit,p1";
reg = <0x41>;
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
vin1-supply = <®_aux_vcc5v>;
vin2-supply = <®_aux_vcc5v>;
vin3-supply = <®_aux_vcc5v>;
vin4-supply = <®_aux_vcc5v>;
vin5-supply = <®_aux_vcc5v>;
vin6-supply = <®_aux_vcc5v>;
aldoin-supply = <®_aux_vcc5v>;
dldoin1-supply = <&buck4>;
dldoin2-supply = <&buck4>;
regulators {
buck1: buck1 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck2: buck2 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck3: buck3 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck4: buck4 {
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck5: buck5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck6: buck6 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <500000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
aldo1: aldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
aldo2: aldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
aldo3: aldo3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
aldo4: aldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
dldo1: dldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
dldo2: dldo2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-always-on;
regulator-boot-on;
};
dldo3: dldo3 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-always-on;
regulator-boot-on;
};
dldo4: dldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
dldo5: dldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
dldo6: dldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
dldo7: dldo7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
&combophy {
spacemit,apmu = <&syscon_apmu 0x11>;
status = "okay";
};
ð0 {
pinctrl-names = "default";
pinctrl-0 = <&gmac0_rgmii_0_cfg>, <&gmac0_phy_0_cfg>;
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
status = "okay";
mdio {
phy0: ethernet-phy@1 {
compatible = "ethernet-phy-id001c.c916";
reg = <1>;
reset-gpios = <&gpio 0 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <50000>;
realtek,aldps-enable;
realtek,clkout-disable;
};
};
};
&qspi_cfg {
qspi-pins {
power-source = <1800>;
};
qspi-cs0-pins {
power-source = <1800>;
};
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&qspi_cfg>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <26500000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
vcc-supply = <&aldo2>; /* PMIC_VCC1V8_QSPI */
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
bootinfo@0 {
reg = <0x0 0x20000>;
};
fsbl@20000 {
reg = <0x20000 0x80000>;
};
env@a0000 {
reg = <0xa0000 0x10000>;
};
esos@b0000 {
reg = <0xb0000 0x100000>;
};
opensbi@1b0000 {
reg = <0x1b0000 0x60000>;
};
uboot@210000 {
reg = <0x210000 0x5f0000>;
};
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_0_cfg>;
status = "okay";
};
&usb2_host {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub@1 {
compatible = "usb1a40,0101";
reg = <1>;
vdd-supply = <®_aux_vcc3v3>;
};
};
&usb2_phy {
status = "okay";
};
&usb3b {
phys = <&usb3b_u2phy>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
status = "okay";
};
&usb3b_u2phy {
status = "okay";
};
&usb3c {
phys = <&usb3c_u2phy>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
status = "okay";
};
&usb3c_u2phy {
status = "okay";
};
&usb3d_u2phy {
status = "okay";
};
&usb3d {
phys = <&usb3d_u2phy>, <&combophy 4 PHY_TYPE_USB3>;
phy-names = "usb2-phy", "usb3-phy";
status = "okay";
};