// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright (c) 2024-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Alexander Stein
* Author: Markus Niebel
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include "imx95-tqma9596la.dtsi"
/ {
model = "TQ-Systems i.MX95 TQMa95xxLA on MBa95xxCA";
compatible = "tq,imx95-tqma9596la-mba95xxca", "tq,imx95-tqma9596la", "fsl,imx95";
chassis-type = "embedded";
aliases {
ethernet0 = &enetc_port0;
ethernet1 = &enetc_port1;
ethernet2 = &enetc_port2;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
i2c0 = &lpi2c1;
i2c1 = &lpi2c2;
i2c2 = &lpi2c3;
i2c3 = &lpi2c4;
i2c4 = &lpi2c5;
i2c5 = &lpi2c6;
i2c6 = &lpi2c7;
i2c7 = &lpi2c8;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
rtc0 = &pcf85063;
rtc1 = &scmi_bbm;
serial0 = &lpuart1;
serial1 = &lpuart2;
serial2 = &lpuart3;
serial3 = &lpuart4;
serial4 = &lpuart5;
serial5 = &lpuart6;
serial6 = &lpuart7;
serial7 = &lpuart8;
spi0 = &flexspi1;
};
chosen {
stdout-path = &lpuart1;
};
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&tpm5 2 100000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
power-supply = <®_12v0>;
status = "disabled";
};
clk_eth: clk-eth {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <156250000>;
};
/*
* TODO: gate is disabled for now and GPIO are hogged
* ENETC driver switches the clock far too late for ENETC2 + SFP
*/
clk_eth_gate: clk-eth-gate {
compatible = "gpio-gate-clock";
enable-gpios = <&expander2 0 GPIO_ACTIVE_HIGH>;
clocks = <&clk_eth>;
#clock-cells = <0>;
status = "disabled";
};
clk_xtal25: clk-xtal25 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
button-b {
label = "BUTTON_B#";
linux,code = <BTN_1>;
gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
wakeup-source;
};
};
gpio-leds {
compatible = "gpio-leds";
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&expander2 13 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led-2 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_HEARTBEAT;
gpios = <&expander2 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
};
reg_v1v8_mb: regulator-v1v8-mb {
compatible = "regulator-fixed";
regulator-name = "V_1V8_MB";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_v3v3_mb: regulator-v3v3-mb {
compatible = "regulator-fixed";
regulator-name = "V_3V3_MB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3v3a_10g: regulator-3v3a-10g {
compatible = "regulator-fixed";
regulator-name = "3V3A_10G";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&expander2 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <2000>;
enable-active-high;
};
reg_12v0: regulator-12v0 {
compatible = "regulator-fixed";
regulator-name = "12V0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_pwm_fan: regulator-pwm-fan {
compatible = "regulator-fixed";
regulator-name = "FAN_PWR";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
gpio = <&expander3 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_12v0>;
/*
* emc2305 fan driver lacks support for fan-supply, so
* alway enable it for now.
* Remove this line once support is added
*/
regulator-always-on;
};
reg_lvds: regulator-lvds {
compatible = "regulator-fixed";
regulator-name = "LCD_PWR_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&expander2 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
/* USB NC limitations, RM 162.1.2 VBUS limitations */
reg_vbus_usb3: regulator-vbus-usb3 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "USB3_VBUS";
gpio = <&gpio4 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
linux_cma: linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0 0x28000000>;
alloc-ranges = <0 0x80000000 0 0x80000000>;
linux,cma-default;
};
};
sfp_xfi: sfp-xfi {
compatible = "sff,sfp";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sfp>;
i2c-bus = <&lpi2c7>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander1 3 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
los-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
};
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
model = "tqm-tlv320aic32";
audio-codec = <&tlv320aic3x04>;
audio-cpu = <&sai3>;
audio-routing =
"IN3_L", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"IN1_L", "Line In Jack",
"IN1_R", "Line In Jack",
"Line Out Jack", "LOL",
"Line Out Jack", "LOR";
};
wifi-connector {
compatible = "pcie-m2-e-connector";
vpcie3v3-supply = <®_v3v3_mb>;
vpcie1v8-supply = <®_v1v8_mb>;
i2c-parent = <&lpi2c2>;
w-disable1-gpios = <&expander2 9 GPIO_ACTIVE_LOW>;
w-disable2-gpios = <&expander2 10 GPIO_ACTIVE_LOW>;
/* UART_WAKE is connected to SM */
/* SDIO_WAKE is connected to SM */
sdio-reset-gpios = <&expander3 2 GPIO_ACTIVE_LOW>;
};
};
&adc1 {
status = "okay";
};
&enetc_port0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enetc0>;
phy-handle = <ðphy0>;
phy-mode = "rgmii-id";
status = "okay";
};
&enetc_port1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enetc1>;
phy-handle = <ðphy1>;
phy-mode = "rgmii-id";
status = "okay";
};
/* No support for XFI yet */
&enetc_port2 {
sfp = <&sfp_xfi>;
phy-mode = "10gbase-r";
clocks = <&clk_eth>;
managed = "in-band-status";
status = "disabled";
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
status = "okay";
};
&lpi2c2 {
tlv320aic3x04: audio-codec@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
clocks = <&scmi_clk IMX95_CLK_SAI3>;
clock-names = "mclk";
reset-gpios = <&expander1 14 GPIO_ACTIVE_LOW>;
iov-supply = <®_v3v3_mb>;
ldoin-supply = <®_v3v3_mb>;
};
sensor_mb: temperature-sensor@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
};
fan_controller: fan-controller@2f {
compatible = "microchip,emc2301", "microchip,emc2305";
reg = <0x2f>;
#address-cells = <1>;
#size-cells = <0>;
#pwm-cells = <3>;
status = "okay";
fan: fan@0 {
reg = <0x0>;
pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED 1>;
#cooling-cells = <2>;
fan-supply = <®_pwm_fan>;
};
};
ptn5110: usb-typec@50 {
compatible = "nxp,ptn5110", "tcpci";
reg = <0x50>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
interrupt-parent = <&gpio2>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
typec_con: connector {
compatible = "usb-c-connector";
label = "X9";
power-role = "source";
data-role = "dual";
source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
self-powered;
port {
typec_con_hs: endpoint {
remote-endpoint = <&typec_hs>;
};
};
};
};
eeprom_mb: eeprom@56 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x56>;
pagesize = <16>;
vcc-supply = <®_v3v3_mb>;
};
pcieclk: clock-generator@68 {
compatible = "renesas,9fgv0441";
reg = <0x68>;
clocks = <&clk_xtal25>;
#clock-cells = <1>;
};
/* D39 IN/OUT 3V3 */
expander1: gpio@74 {
compatible = "ti,tca9539";
reg = <0x74>;
vcc-supply = <®_v3v3_mb>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_expander1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio2>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
gpio-line-names =
/* 00 */ "BUTTON_B#", "CAM0_SYNC_3V3",
/* 02 */ "CAM1_SYNC_3V3", "SFP_MOD_ABS",
/* 04 */ "DIG_IN1", "DIG_IN2",
/* 06 */ "DIG_IN3", "DIG_IN4",
/* 08 */ "DIG_OUT_1_2_STATE", "DIG_OUT_3_4_STATE",
/* 10 */ "DIG_OUT_1_EN", "DIG_OUT_2_EN",
/* 12 */ "DIG_OUT_3_EN", "DIG_OUT_4_EN",
/* 14 */ "AUDIO_RST#", "12V_EN";
};
/* D40 OUT 3V3 */
expander2: gpio@75 {
compatible = "ti,tca9539";
reg = <0x75>;
vcc-supply = <®_v3v3_mb>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
/* 00 */ "ETH10G_REFCLK_EN", "ETH10G_REFCLK_RST#",
/* 02 */ "SFP_TX_DIS", "USB3_RESET#",
/* 04 */ "USB2_RESET#", "LCD_RESET#",
/* 06 */ "LCD_BLT_EN", "LCD_PWR_EN",
/* 08 */ "M2_KEYE_PERST#", "M2_KEYE_WDISABLE1#",
/* 10 */ "M2_KEYE_WDISABLE2#", "M2_KEYB_PERST#",
/* 12 */ "M2_KEYB_WDISABLE1#", "USER_LED1",
/* 14 */ "USER_LED2", "3V3A_10G_EN";
eth10g-refclk-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "ETH10G_REFCLK_EN";
};
eth10g-refclk-rst-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "ETH10G_REFCLK_RST#";
};
m2-keyb-wdisable1-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
output-low;
line-name = "M2_KEYB_WDISABLE1#";
};
};
/* D41 OUT 1V8 */
expander3: gpio@76 {
compatible = "ti,tca9539";
reg = <0x76>;
vcc-supply = <®_v1v8_mb>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
/* 00 */ "ENET1_RESET#", "ENET2_RESET#",
/* 02 */ "M2_KEYE_SDIO_RST#", "M2_KEYE_DEV_WLAN_WAKE#",
/* 04 */ "M2_KEYE_DEV_BT_WAKE", "M2_KEYB_W_DISABLE2#",
/* 06 */ "M2_KEYB_RST#", "M2_KEYB_FULL_CARD_PWR_OFF#",
/* 08 */ "M2_KEYB_DPR", "CAM0_PWR#",
/* 10 */ "CAM1_PWR#", "CAM0_RST#",
/* 12 */ "CAM1_RST#", "CAM0_TRIGGER",
/* 14 */ "CAM1_TRIGGER", "FAN_PWR_EN";
/* vendor defined pin 42 */
m2-keye-dev_wlan-wake-hog {
gpio-hog;
gpios = <3 GPIO_ACTIVE_LOW>;
input;
line-name = "M2_KEYE_DEV_WLAN_WAKE#";
};
/* vendor defined pin 40 */
m2-keye-dev_bt-wake-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_LOW>;
input;
line-name = "M2_KEYE_DEV_BT_WAKE#";
};
m2-keyb-wdisable2-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_LOW>;
output-low;
line-name = "M2_KEYB_WDISABLE2#";
};
m2-keyb-rst-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_LOW>;
output-low;
line-name = "M2_KEYB_RST#";
};
m2-keyb-full-card-pwr-off-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_LOW>;
output-low;
line-name = "M2_KEYB_FULL_CARD_PWR_OFF#";
};
};
};
/* X4 + SFP */
&lpi2c7 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_lpi2c7>;
pinctrl-1 = <&pinctrl_lpi2c7_recovery>;
scl-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
/* TODO: 0x19: retimer */
/* 0x50 / 0x51: SFP EEPROM */
};
/* X4 */
&lpspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpspi4>;
cs-gpios = <&gpio5 14 GPIO_ACTIVE_LOW>, <&gpio5 13 GPIO_ACTIVE_LOW>;
/* max 30 MHz as per datasheet, without SCK loopback via pad (LPSPI_CFGR1[SAMPLE]) */
status = "okay";
};
&lpuart1 {
/* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
status = "okay";
};
&lpuart2 {
/* SM */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
status = "reserved";
};
&lpuart5 {
/* X16 M.2 KEY E */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart5>;
status = "okay";
};
&lpuart7 {
/* X5 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart7>;
status = "okay";
};
&lpuart8 {
/* X15 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart8>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
&netc_blk_ctrl {
status = "okay";
};
&netc_emdio {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emdio>;
status = "okay";
/* IRQ pin is AON GPIO, not usable */
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
reset-gpios = <&expander3 0 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ethphy1>;
reset-gpios = <&expander3 1 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
interrupt-parent = <&gpio4>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
};
&netc_timer {
status = "okay";
};
&netcmix_blk_ctrl {
status = "okay";
};
/* X16 M2 / E-Key mPCIe */
&pcie0 {
pinctrl-0 = <&pinctrl_pcie0>;
pinctrl-names = "default";
clocks = <&scmi_clk IMX95_CLK_HSIO>,
<&scmi_clk IMX95_CLK_HSIOPLL>,
<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
<&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
<&hsio_blk_ctl 0>,
<&pcieclk 1>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref", "extref";
reset-gpios = <&expander2 8 GPIO_ACTIVE_LOW>;
/* Not supported on REV.0100 */
/* supports-clkreq; */
status = "okay";
};
/* X17 M2 / B-Key PCIe */
&pcie1 {
pinctrl-0 = <&pinctrl_pcie1>;
pinctrl-names = "default";
clocks = <&scmi_clk IMX95_CLK_HSIO>,
<&scmi_clk IMX95_CLK_HSIOPLL>,
<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
<&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
<&hsio_blk_ctl 0>,
<&pcieclk 0>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref", "extref";
reset-gpios = <&expander2 11 GPIO_ACTIVE_LOW>;
/* Not supported on REV.0100 */
/* supports-clkreq; */
status = "okay";
};
®_sdvmmc {
status = "okay";
};
&sai3 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
<&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
<&scmi_clk IMX95_CLK_AUDIOPLL1>,
<&scmi_clk IMX95_CLK_AUDIOPLL2>,
<&scmi_clk IMX95_CLK_SAI3>;
assigned-clock-parents = <0>, <0>, <0>, <0>,
<&scmi_clk IMX95_CLK_AUDIOPLL1>;
assigned-clock-rates = <3932160000>,
<3612672000>, <393216000>,
<361267200>, <12288000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
&scmi_bbm {
linux,code = <KEY_POWER>;
};
&thermal_zones {
a55-thermal {
trips {
cpu_active0: trip-active0 {
temperature = <40000>;
hysteresis = <5000>;
type = "active";
};
cpu_active1: trip-active1 {
temperature = <48000>;
hysteresis = <3000>;
type = "active";
};
cpu_active2: trip-active2 {
temperature = <60000>;
hysteresis = <10000>;
type = "active";
};
};
cooling-maps {
map1 {
trip = <&cpu_active0>;
cooling-device = <&fan 0 2>;
};
map2 {
trip = <&cpu_active1>;
cooling-device = <&fan 3 5>;
};
map3 {
trip = <&cpu_active2>;
cooling-device = <&fan 6 10>;
};
};
};
};
&tpm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm3>;
status = "okay";
};
&tpm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm5>;
};
&usb2 {
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
usb-role-switch;
disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
port {
typec_hs: endpoint {
remote-endpoint = <&typec_con_hs>;
};
};
};
&usb3 {
status = "okay";
};
&usb3_dwc3 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_2_0: hub@1 {
compatible = "usb451,8142";
reg = <1>;
peer-hub = <&hub_3_0>;
reset-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
vdd-supply = <®_v3v3_mb>;
#address-cells = <1>;
#size-cells = <0>;
hub_2_1: hub@1 {
compatible = "usb424,2514";
reg = <1>;
reset-gpios = <&expander2 4 GPIO_ACTIVE_LOW>;
vdd-supply = <®_v3v3_mb>;
vdda-supply = <®_v3v3_mb>;
};
};
hub_3_0: hub@2 {
compatible = "usb451,8140";
reg = <2>;
peer-hub = <&hub_2_0>;
reset-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
vdd-supply = <®_v3v3_mb>;
};
};
&usb3_phy {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
vbus-supply = <®_vbus_usb3>;
status = "okay";
};
/* X7 µSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
vmmc-supply = <®_sdvmmc>;
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
no-mmc;
no-sdio;
disable-wp;
bus-width = <4>;
status = "okay";
};
&scmi_iomuxc {
pinctrl_enetc0: enetc0grp {
fsl,pins = <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x1100>,
<IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x1100>,
<IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x1100>,
<IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x1100>,
<IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x1100>,
<IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x1100>,
<IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x11e>,
<IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x11e>,
<IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x11e>,
<IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x11e>,
<IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x11e>,
<IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x11e>;
};
pinctrl_enetc1: enetc1grp {
fsl,pins = <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x1100>,
<IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x1100>,
<IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x1100>,
<IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x1100>,
<IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x1100>,
<IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x1100>,
<IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x11e>,
<IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x11e>,
<IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x11e>,
<IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x11e>,
<IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x11e>,
<IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x11e>;
};
pinctrl_ethphy1: ethphy1grp {
fsl,pins = <IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0 0x1100>;
};
pinctrl_expander1: expander1grp {
fsl,pins = <IMX95_PAD_GPIO_IO14__GPIO2_IO_BIT14 0x1100>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX 0x1300>,
<IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX 0x31e>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <IMX95_PAD_GPIO_IO25__CAN2_TX 0x31e>,
<IMX95_PAD_GPIO_IO27__CAN2_RX 0x1300>;
};
pinctrl_lpi2c7: lpi2c7grp {
fsl,pins = <IMX95_PAD_GPIO_IO07__LPI2C7_SCL 0x40001b1e>,
<IMX95_PAD_GPIO_IO06__LPI2C7_SDA 0x40001b1e>;
};
pinctrl_lpi2c7_recovery: lpi2c7recoverygrp {
fsl,pins = <IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7 0x40001b1e>,
<IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6 0x40001b1e>;
};
pinctrl_lpspi4: lpspi4grp {
fsl,pins = <IMX95_PAD_GPIO_IO37__LPSPI4_SCK 0x11e>,
<IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x111e>,
<IMX95_PAD_GPIO_IO36__LPSPI4_SOUT 0x11e>,
<IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x11e>,
<IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x11e>;
};
pinctrl_lpuart1: lpuart1grp {
fsl,pins = <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e>,
<IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x1300>;
};
pinctrl_lpuart2: lpuart2grp {
fsl,pins = <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e>,
<IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x1300>;
};
pinctrl_lpuart5: lpuart5grp {
fsl,pins = <IMX95_PAD_GPIO_IO00__LPUART5_TX 0x31e>,
<IMX95_PAD_GPIO_IO01__LPUART5_RX 0x1300>,
<IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x1300>,
<IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x31e>;
};
pinctrl_lpuart7: lpuart7grp {
fsl,pins = <IMX95_PAD_GPIO_IO08__LPUART7_TX 0x31e>,
<IMX95_PAD_GPIO_IO09__LPUART7_RX 0x1300>,
<IMX95_PAD_GPIO_IO10__LPUART7_CTS_B 0x1300>,
<IMX95_PAD_GPIO_IO11__LPUART7_RTS_B 0x31e>;
};
pinctrl_lpuart8: lpuart8grp {
fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX 0x31e>,
<IMX95_PAD_GPIO_IO13__LPUART8_RX 0x1300>,
<IMX95_PAD_GPIO_IO15__LPUART8_RTS_B 0x31e>;
};
pinctrl_emdio: emdiogrp {
fsl,pins = <IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x51e>,
<IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x51e>;
};
pinctrl_pcie0: pcie0grp {
fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x111e>;
};
pinctrl_pcie1: pcie1grp {
fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x111e>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x51e>,
<IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x51e>,
<IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x1300>,
<IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x51e>,
<IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x51e>;
};
pinctrl_retimer: retimergrp {
fsl,pins = <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x1100>;
};
pinctrl_sfp: sfpgrp {
fsl,pins = <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30 0x1100>,
<IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31 0x1100>;
};
pinctrl_tpm3: tpm3grp {
fsl,pins = <IMX95_PAD_GPIO_IO24__TPM3_CH3 0x51e>;
};
pinctrl_tpm5: tpm5grp {
fsl,pins = <IMX95_PAD_GPIO_IO18__TPM5_CH2 0x51e>;
};
pinctrl_typec: typecgrp {
fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x1100>;
};
pinctrl_usb3: usb3grp {
fsl,pins = <IMX95_PAD_ENET1_MDIO__GPIO4_IO_BIT1 0x31e>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x1100>,
<IMX95_PAD_SD2_CLK__USDHC2_CLK 0x51e>,
<IMX95_PAD_SD2_CMD__USDHC2_CMD 0x31e>,
<IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x131e>,
<IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x131e>,
<IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x131e>,
<IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x131e>,
<IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x1100>,
<IMX95_PAD_SD2_CLK__USDHC2_CLK 0x58e>,
<IMX95_PAD_SD2_CMD__USDHC2_CMD 0x38e>,
<IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e>,
<IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e>,
<IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e>,
<IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e>,
<IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x1100>,
<IMX95_PAD_SD2_CLK__USDHC2_CLK 0x5fe>,
<IMX95_PAD_SD2_CMD__USDHC2_CMD 0x3fe>,
<IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe>,
<IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe>,
<IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe>,
<IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe>,
<IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e>;
};
};