// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device tree overlay for the Radxa Camera 4K attached to the camera
* connector of the Radxa ROCK 4D.
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/clock/rockchip,rk3576-cru.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
#include <dt-bindings/pinctrl/rockchip.h>
&{/} {
savdd_cam: regulator-savdd-cam {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-name = "savdd_cam";
vin-supply = <&vcc_3v3_s0>;
};
sdvdd_cam: regulator-sdvdd-cam {
compatible = "regulator-fixed";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "sdvdd_cam";
vin-supply = <&vcc_5v0_device>;
};
siovdd_cam: regulator-siovdd-cam {
compatible = "regulator-fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "siovdd_cam";
vin-supply = <&vcc_3v3_s0>;
};
};
&csi1 {
status = "okay";
};
&csi1_in {
csi1_input: endpoint {
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
data-lanes = <1 2 3 4>;
link-frequencies = /bits/ 64 <445500000>;
remote-endpoint = <&imx415_output>;
};
};
&csi_dphy0 {
status = "okay";
};
&i2c5 {
pinctrl-names = "default";
pinctrl-0 = <&i2c5m3_xfer>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
imx415: camera-sensor@1a {
compatible = "sony,imx415";
reg = <0x1a>;
assigned-clocks = <&cru CLK_MIPI_CAMERAOUT_M1>;
assigned-clock-rates = <37125000>;
avdd-supply = <&savdd_cam>;
clocks = <&cru CLK_MIPI_CAMERAOUT_M1>;
dvdd-supply = <&sdvdd_cam>;
orientation = <2>; /* External */
ovdd-supply = <&siovdd_cam>;
pinctrl-names = "default";
pinctrl-0 = <&cam_rstn &cam_clk1m0_clk1>;
reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
port {
imx415_output: endpoint {
data-lanes = <1 2 3 4>;
link-frequencies = /bits/ 64 <445500000>;
remote-endpoint = <&csi1_input>;
};
};
};
};
&pinctrl {
cam {
cam_rstn: cam-rstn-pinctrl {
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&vicap {
status = "okay";
};
&vicap_mmu {
status = "okay";
};