// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {

	pma8084_0: pma8084@0 {
		compatible = "qcom,pma8084", "qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		rtc@6000 {
			compatible = "qcom,pm8941-rtc";
			reg = <0x6000>,
			      <0x6100>;
			reg-names = "rtc", "alarm";
			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
		};

		pwrkey@800 {
			compatible = "qcom,pm8941-pwrkey";
			reg = <0x800>;
			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
			debounce = <15625>;
			bias-pull-up;
		};

		pma8084_gpios: gpio@c000 {
			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
			reg = <0xc000>;
			gpio-controller;
			gpio-ranges = <&pma8084_gpios 0 0 22>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pma8084_mpps: mpps@a000 {
			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
			reg = <0xa000>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pma8084_mpps 0 0 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pma8084_temp: temp-alarm@2400 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0x2400>;
			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
			#thermal-sensor-cells = <0>;
			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
			io-channel-names = "thermal";
		};

		pma8084_vadc: adc@3100 {
			compatible = "qcom,spmi-vadc";
			reg = <0x3100>;
			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
			#address-cells = <1>;
			#size-cells = <0>;
			#io-channel-cells = <1>;

			channel@8 {
				reg = <VADC_DIE_TEMP>;
			};

			channel@9 {
				reg = <VADC_REF_625MV>;
			};

			channel@a {
				reg = <VADC_REF_1250MV>;
			};

			channel@c {
				reg = <VADC_SPARE1>;
			};

			channel@e {
				reg = <VADC_GND_REF>;
			};

			channel@f {
				reg = <VADC_VDD_VADC>;
			};
		};
	};

	pma8084_1: pma8084@1 {
		compatible = "qcom,pma8084", "qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;
	};
};