// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2020, The Linux Foundation. All rights reserved. */ /dts-v1/; #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" #include "pm8150l.dtsi" / { model = "Qualcomm Technologies, Inc. SM8250 HDK"; compatible = "qcom,sm8250-hdk", "qcom,sm8250"; chassis-type = "embedded"; aliases { serial0 = &uart12; }; chosen { stdout-path = "serial0:115200n8"; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; vreg_s4a_1p8: pm8150-s4 { compatible = "regulator-fixed"; regulator-name = "vreg_s4a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; vin-supply = <&vph_pwr>; }; vreg_s6c_0p88: smpc6-regulator { compatible = "regulator-fixed"; regulator-name = "vreg_s6c_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-always-on; vin-supply = <&vph_pwr>; }; gpio-keys { compatible = "gpio-keys"; key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; }; }; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-s9-supply = <&vph_pwr>; vdd-s10-supply = <&vph_pwr>; vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; vdd-l2-l10-supply = <&vreg_bob>; vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; vdd-l6-l9-supply = <&vreg_s8c_1p3>; vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; vdd-l13-l16-l17-supply = <&vreg_bob>; vreg_s5a_1p9: smps5 { regulator-name = "vreg_s5a_1p9"; regulator-min-microvolt = <1824000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s6a_0p95: smps6 { regulator-name = "vreg_s6a_0p95"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1128000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2a_3p1: ldo2 { regulator-name = "vreg_l2a_3p1"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3a_0p9: ldo3 { regulator-name = "vreg_l3a_0p9"; regulator-min-microvolt = <928000>; regulator-max-microvolt = <932000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a_0p88: ldo5 { regulator-name = "vreg_l5a_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6a_1p2: ldo6 { regulator-name = "vreg_l6a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a_1p7: ldo7 { regulator-name = "vreg_l7a_1p7"; regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9a_1p2: ldo9 { regulator-name = "vreg_l9a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10a_1p8: ldo10 { regulator-name = "vreg_l10a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12a_1p8: ldo12 { regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a_ts_3p0: ldo13 { regulator-name = "vreg_l13a_ts_3p0"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14a_1p8: ldo14 { regulator-name = "vreg_l14a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15a_1p8: ldo15 { regulator-name = "vreg_l15a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16a_3p3: ldo16 { regulator-name = "vreg_l16a_3p3"; regulator-min-microvolt = <3024000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l17a_2p96: ldo17 { regulator-name = "vreg_l17a_2p96"; regulator-min-microvolt = <2496000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18a_0p92: ldo18 { regulator-name = "vreg_l18a_0p92"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <920000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-l1-l8-supply = <&vreg_s4a_1p8>; vdd-l2-l3-supply = <&vreg_s8c_1p3>; vdd-l4-l5-l6-supply = <&vreg_bob>; vdd-l7-l11-supply = <&vreg_bob>; vdd-l9-l10-supply = <&vreg_bob>; vdd-bob-supply = <&vph_pwr>; vreg_bob: bob { regulator-name = "vreg_bob"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; }; vreg_s8c_1p3: smps8 { regulator-name = "vreg_s8c_1p3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l1c_1p8: ldo1 { regulator-name = "vreg_l1c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c_1p2: ldo2 { regulator-name = "vreg_l2c_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c_0p8: ldo3 { regulator-name = "vreg_l3c_0p8"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_1p8: ldo4 { regulator-name = "vreg_l4c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c_1p8: ldo5 { regulator-name = "vreg_l5c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c_2p96: ldo6 { regulator-name = "vreg_l6c_2p96"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_cam_vcm0_2p85: ldo7 { regulator-name = "vreg_l7c_cam_vcm0_2p85"; regulator-min-microvolt = <2856000>; regulator-max-microvolt = <3104000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c_1p8: ldo8 { regulator-name = "vreg_l8c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9c_2p96: ldo9 { regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p0: ldo10 { regulator-name = "vreg_l10c_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3312000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c_3p3: ldo11 { regulator-name = "vreg_l11c_3p3"; regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vreg_bob>; vdd-l2-supply = <&vreg_s8c_1p3>; vdd-l5-l6-supply = <&vreg_bob>; vdd-l7-supply = <&vreg_s4a_1p8>; vreg_l1f_cam_dvdd1_1p1: ldo1 { regulator-name = "vreg_l1f_cam_dvdd1_1p1"; regulator-min-microvolt = <1104000>; regulator-max-microvolt = <1104000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2f_cam_dvdd0_1p2: ldo2 { regulator-name = "vreg_l2f_cam_dvdd0_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3f_cam_dvdd2_1p05: ldo3 { regulator-name = "vreg_l3f_cam_dvdd2_1p05"; regulator-min-microvolt = <1056000>; regulator-max-microvolt = <1056000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5f_cam_avdd0_2p85: ldo5 { regulator-name = "vreg_l5f_cam_avdd0_2p85"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6f_cam_avdd1_2p8: ldo6 { regulator-name = "vreg_l6f_cam_avdd1_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7f_1p8: ldo7 { regulator-name = "vreg_l7f_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; }; &gmu { status = "okay"; }; &gpu { status = "okay"; }; &pon_pwrkey { status = "okay"; }; &pon_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; &qupv3_id_1 { status = "okay"; }; &tlmm { gpio-reserved-ranges = <28 4>, <40 4>; }; &uart12 { status = "okay"; }; &ufs_mem_hc { status = "okay"; vcc-supply = <&vreg_l17a_2p96>; vcc-max-microamp = <800000>; vccq-supply = <&vreg_l6a_1p2>; vccq-max-microamp = <800000>; vccq2-supply = <&vreg_s4a_1p8>; vccq2-max-microamp = <800000>; }; &ufs_mem_phy { status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; vdda-pll-supply = <&vreg_l9a_1p2>; }; &usb_1_hsphy { status = "okay"; vdda-pll-supply = <&vreg_l5a_0p88>; vdda33-supply = <&vreg_l2a_3p1>; vdda18-supply = <&vreg_l12a_1p8>; }; &usb_2_hsphy { status = "okay"; vdda-pll-supply = <&vreg_l5a_0p88>; vdda33-supply = <&vreg_l2a_3p1>; vdda18-supply = <&vreg_l12a_1p8>; }; &usb_1_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; }; &usb_2_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; }; &usb_1 { status = "okay"; }; &usb_2 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "peripheral"; }; &usb_2_dwc3 { dr_mode = "host"; }; &venus { status = "okay"; };