// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
#include "imx8qm-apalis-v1.1.dtsi"
/ {
model = "Toradex Apalis iMX8QM";
compatible = "toradex,apalis-imx8",
"fsl,imx8qm";
};
ðphy0 {
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
};
/*
* Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver
* doesn't support setting internal PHY delay for TXC line for
* this PHY model. Use delay on MAC side instead.
*/
&fec1 {
fsl,rgmii_txc_dly;
phy-mode = "rgmii-rxid";
};
/* TODO: Apalis HDMI1 */
/* Apalis I2C2 (DDC) */
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c0>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
};
&lsio_gpio0 {
gpio-line-names = "MXM3_279",
"MXM3_277",
"MXM3_135",
"MXM3_203",
"MXM3_201",
"MXM3_275",
"MXM3_110",
"MXM3_120",
"MXM3_1/GPIO1",
"MXM3_3/GPIO2",
"MXM3_124",
"MXM3_122",
"MXM3_5/GPIO3",
"MXM3_7/GPIO4",
"",
"",
"MXM3_4",
"MXM3_211",
"MXM3_209",
"MXM3_2",
"MXM3_136",
"MXM3_134",
"MXM3_6",
"MXM3_8",
"MXM3_112",
"MXM3_118",
"MXM3_114",
"MXM3_116";
};
&lsio_gpio1 {
gpio-line-names = "",
"",
"",
"",
"MXM3_286",
"",
"MXM3_87",
"MXM3_99",
"MXM3_138",
"MXM3_140",
"MXM3_239",
"",
"MXM3_281",
"MXM3_283",
"MXM3_126",
"MXM3_132",
"",
"",
"",
"",
"MXM3_173",
"MXM3_175",
"MXM3_123";
};
&lsio_gpio2 {
gpio-line-names = "",
"",
"",
"",
"",
"",
"",
"MXM3_198",
"MXM3_35",
"MXM3_164",
"",
"",
"",
"",
"MXM3_217",
"MXM3_215",
"",
"",
"MXM3_193",
"MXM3_194",
"MXM3_37",
"",
"MXM3_271",
"MXM3_273",
"MXM3_195",
"MXM3_197",
"MXM3_177",
"MXM3_179",
"MXM3_181",
"MXM3_183",
"MXM3_185",
"MXM3_187";
};
&lsio_gpio3 {
gpio-line-names = "MXM3_191",
"",
"MXM3_221",
"MXM3_225",
"MXM3_223",
"MXM3_227",
"MXM3_200",
"MXM3_235",
"MXM3_231",
"MXM3_229",
"MXM3_233",
"MXM3_204",
"MXM3_196",
"",
"MXM3_202",
"",
"",
"",
"MXM3_305",
"MXM3_307",
"MXM3_309",
"MXM3_311",
"MXM3_315",
"MXM3_317",
"MXM3_319",
"MXM3_321",
"MXM3_15/GPIO7",
"MXM3_63",
"MXM3_17/GPIO8",
"MXM3_12",
"MXM3_14",
"MXM3_16";
};
&lsio_gpio4 {
gpio-line-names = "MXM3_18",
"MXM3_11/GPIO5",
"MXM3_13/GPIO6",
"MXM3_274",
"MXM3_84",
"MXM3_262",
"MXM3_96",
"",
"",
"",
"",
"",
"MXM3_190",
"",
"",
"",
"MXM3_269",
"MXM3_251",
"MXM3_253",
"MXM3_295",
"MXM3_299",
"MXM3_301",
"MXM3_297",
"MXM3_293",
"MXM3_291",
"MXM3_289",
"MXM3_287";
/* Enable pcie root / sata ref clock unconditionally */
pcie-sata-hog {
gpios = <27 GPIO_ACTIVE_HIGH>;
};
};
&lsio_gpio5 {
gpio-line-names = "",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"MXM3_150",
"MXM3_160",
"MXM3_162",
"MXM3_144",
"MXM3_146",
"MXM3_148",
"MXM3_152",
"MXM3_156",
"MXM3_158",
"MXM3_159",
"MXM3_184",
"MXM3_180",
"MXM3_186",
"MXM3_188",
"MXM3_176",
"MXM3_178";
};
&lsio_gpio6 {
gpio-line-names = "",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"MXM3_261",
"MXM3_263",
"MXM3_259",
"MXM3_257",
"MXM3_255",
"MXM3_128",
"MXM3_130",
"MXM3_265",
"MXM3_249",
"MXM3_247",
"MXM3_245",
"MXM3_243";
};
&pinctrl_fec1 {
fsl,pins =
/* Use pads in 1.8V mode */
<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>,
<IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020>,
<IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>,
<IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020>,
<IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020>,
<IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020>,
<IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020>,
<IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020>,
<IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020>,
<IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020>,
<IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020>,
<IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020>,
<IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020>,
<IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020>,
<IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020>,
<IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020>,
/* On-module ETH_RESET# */
<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>,
/* On-module ETH_INT# */
<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05 0x04000060>;
};
&pinctrl_fec1_sleep {
fsl,pins =
<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>,
<IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14 0x04000040>,
<IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13 0x04000040>,
<IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 0x04000040>,
<IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 0x04000040>,
<IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 0x04000040>,
<IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 0x04000040>,
<IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 0x04000040>,
<IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 0x04000040>,
<IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 0x04000040>,
<IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 0x04000040>,
<IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 0x04000040>,
<IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 0x04000040>,
<IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 0x04000040>,
<IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 0x04000040>,
<IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 0x04000040>,
<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x04000040>,
<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05 0x04000040>;
};
&iomuxc {
/* Apalis I2C2 (DDC) */
pinctrl_lpi2c0: lpi2c0grp {
fsl,pins =
<IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x04000022>,
<IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x04000022>;
};
};
/* On-module PCIe_CTRL0_CLKREQ */
&pinctrl_pcie_sata_refclk {
fsl,pins =
<IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27 0x00000021>;
};
/* TODO: On-module Wi-Fi */
/* Apalis MMC1 */
&usdhc2 {
/*
* The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
* issues with certain SD cards, disable 1.8V signaling for now.
*/
no-1-8-v;
};
/* Apalis SD1 */
&usdhc3 {
/*
* The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
* issues with certain SD cards, disable 1.8V signaling for now.
*/
no-1-8-v;
};