// SPDX-License-Identifier: GPL-2.0-or-later /* * a3m071 board Device Tree Source * * Copyright 2012 Stefan Roese <sr@denx.de> * * Copyright (C) 2011 DENX Software Engineering GmbH * Heiko Schocher <hs@denx.de> * * Copyright (C) 2007 Semihalf * Marian Balakowicz <m8@semihalf.com> */ /include/ "mpc5200b.dtsi" &gpt0 { fsl,has-wdt; }; / { model = "anonymous,a3m071"; compatible = "anonymous,a3m071"; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; ranges = <0 0xf0000000 0x0000c000>; reg = <0xf0000000 0x00000100>; bus-frequency = <0>; /* From boot loader */ system-frequency = <0>; /* From boot loader */ spi@f00 { status = "disabled"; }; usb: usb@1000 { status = "disabled"; }; psc@2000 { compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; psc@2200 { status = "disabled"; }; psc@2400 { status = "disabled"; }; psc@2600 { status = "disabled"; }; psc@2800 { status = "disabled"; }; psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; ethernet@3000 { phy-handle = <&phy0>; }; mdio@3000 { phy0: ethernet-phy@3 { reg = <0x03>; }; }; ata@3a00 { status = "disabled"; }; i2c@3d00 { status = "disabled"; }; i2c@3d40 { status = "disabled"; }; }; localbus { compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x02000000 3 0 0xe9000000 0x00080000 5 0 0xe8000000 0x00010000>; flash@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0x0 0x02000000>; compatible = "cfi-flash"; bank-width = <2>; partition@0 { label = "u-boot"; reg = <0x00000000 0x00040000>; read-only; }; partition@40000 { label = "env"; reg = <0x00040000 0x00020000>; }; partition@60000 { label = "dtb"; reg = <0x00060000 0x00020000>; }; partition@80000 { label = "kernel"; reg = <0x00080000 0x00500000>; }; partition@580000 { label = "root"; reg = <0x00580000 0x00A80000>; }; }; fpga@3,0 { compatible = "anonymous,a3m071-fpga"; reg = <3 0x0 0x00080000 5 0x0 0x00010000>; interrupts = <0 0 3>; /* level low */ }; }; pci@f0000d00 { status = "disabled"; }; };