/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright 2003, 2007 Simtec Electronics
 *	http://armlinux.simtec.co.uk/
 *	Ben Dooks <ben@simtec.co.uk>
 *
 * S3C - Memory map definitions (virtual addresses)
 */

#ifndef __ASM_PLAT_MAP_H
#define __ASM_PLAT_MAP_H __FILE__

/* Fit all our registers in at 0xF6000000 upwards, trying to use as
 * little of the VA space as possible so vmalloc and friends have a
 * better chance of getting memory.
 *
 * we try to ensure stuff like the IRQ registers are available for
 * an single MOVS instruction (ie, only 8 bits of set data)
 */

#define S3C_ADDR_BASE	0xF6000000

#ifndef __ASSEMBLY__
#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
#else
#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
#endif

#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */

/* ISA device mapping for BAST to use with inb()/outb() on 8-bit I/O.
 * 16-bit I/O on BAST now requires driver modifications to manually
 * ioremap CS3.
 */
#define S3C24XX_VA_ISA_BYTE	PCI_IOBASE

/* This is used for the CPU specific mappings that may be needed, so that
 * they do not need to directly used S3C_ADDR() and thus make it easier to
 * modify the space for mapping.
 */
#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))

#endif /* __ASM_PLAT_MAP_H */