# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2025 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ade9000.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices ADE9000/ADE9078 High Performance, Polyphase Energy Metering

maintainers:
  - Antoniu Miclaus <antoniu.miclaus@analog.com>

description: |
  The ADE9000 and ADE9078 are highly accurate, fully integrated, multiphase
  energy and power quality monitoring devices. Superior analog performance and a
  digital signal processing (DSP) core enable accurate energy monitoring over a
  wide dynamic range. An integrated high end reference ensures low drift over
  temperature with a combined drift of less than ±25 ppm/°C maximum for the
  entire channel including a programmable gain amplifier (PGA) and an
  analog-to-digital converter (ADC). The ADE9078 does not provide the on-chip
  dip/swell detection available on the ADE9000.

  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9000.pdf
  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9078.pdf

$ref: /schemas/spi/spi-peripheral-props.yaml#

properties:
  compatible:
    enum:
      - adi,ade9000
      - adi,ade9078

  reg:
    maxItems: 1

  spi-max-frequency:
    maximum: 20000000

  interrupts:
    maxItems: 3

  interrupt-names:
    items:
      enum: [irq0, irq1, dready]
    minItems: 1
    maxItems: 3

  reset-gpios:
    description:
      Must be the device tree identifier of the RESET pin. As the line is
      active low, it should be marked GPIO_ACTIVE_LOW.
    maxItems: 1

  vdd-supply: true

  vref-supply: true

  clocks:
    description: External clock source when not using crystal
    maxItems: 1

  "#clock-cells":
    description:
      ADE9000 can provide clock output via CLKOUT pin with external buffer.
    const: 0

required:
  - compatible
  - reg
  - vdd-supply

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: adi,ade9078
    then:
      properties:
        spi-max-frequency:
          maximum: 10000000

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        adc@0 {
            compatible = "adi,ade9000";
            reg = <0>;
            spi-max-frequency = <7000000>;

            #clock-cells = <0>;
            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
            interrupts = <2 IRQ_TYPE_EDGE_FALLING>, <3 IRQ_TYPE_EDGE_FALLING>, <4 IRQ_TYPE_EDGE_FALLING>;
            interrupt-names = "irq0", "irq1", "dready";
            interrupt-parent = <&gpio>;
            clocks = <&ext_clock_24576khz>;
            vdd-supply = <&vdd_reg>;
        };
    };