// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2014 Linaro Ltd.
*/
#include "ste-ab8500.dtsi"
/ {
href_sound: sound {
compatible = "audio-graph-card2";
label = "HREF-500";
widgets =
"Headphone", "Headset",
"Speaker", "Earpiece Speaker",
"Speaker", "Loudspeaker",
"Line", "Line Out",
"Speaker", "Vibra 1 Motor",
"Speaker", "Vibra 2 Motor",
"Microphone", "Mic 1 Jack",
"Microphone", "Mic 2 Jack",
"Line", "Line In",
"Microphone", "Digital Mic 1",
"Microphone", "Digital Mic 2",
"Microphone", "Digital Mic 3",
"Microphone", "Digital Mic 4",
"Microphone", "Digital Mic 5",
"Microphone", "Digital Mic 6";
routing =
"Headset", "Headset Left",
"Headset", "Headset Right",
"Earpiece Speaker", "Earpiece",
"Loudspeaker", "Speaker Left",
"Loudspeaker", "Speaker Right",
"Line Out", "LineOut Left",
"Line Out", "LineOut Right",
"Vibra 1 Motor", "Vibra 1",
"Vibra 2 Motor", "Vibra 2",
"Mic 1", "Mic 1 Jack",
"Mic 2", "Mic 2 Jack",
"LineIn Left", "Line In",
"LineIn Right", "Line In",
"DMic 1", "Digital Mic 1",
"DMic 2", "Digital Mic 2",
"DMic 3", "Digital Mic 3",
"DMic 4", "Digital Mic 4",
"DMic 5", "Digital Mic 5",
"DMic 6", "Digital Mic 6";
links = <&href_msp1_port &href_msp3_port>;
};
soc {
prcmu@80157000 {
ab8500 {
phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
regulator {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-name = "V-eMMC1";
};
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-name = "V-MMC-SD";
};
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-name = "V-TVOUT";
};
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-name = "V-AUD";
};
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-name = "V-AMIC1";
};
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-name = "V-DMIC";
};
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-name = "V-CSI/DSI";
};
};
gpio {
/* Hog a few default settings */
pinctrl-names = "default";
pinctrl-0 = <&gpio2_default_mode>,
<&gpio4_default_mode>,
<&gpio10_default_mode>,
<&gpio11_default_mode>,
<&gpio12_default_mode>,
<&gpio13_default_mode>,
<&gpio16_default_mode>,
<&gpio24_default_mode>,
<&gpio25_default_mode>,
<&gpio36_default_mode>,
<&gpio37_default_mode>,
<&gpio38_default_mode>,
<&gpio39_default_mode>,
<&gpio42_default_mode>,
<&gpio26_default_mode>,
<&gpio35_default_mode>,
<&ycbcr_default_mode>,
<&pwm_default_mode>,
<&adi1_default_mode>,
<&usbuicc_default_mode>,
<&dmic_default_mode>,
<&extcpena_default_mode>,
<&modsclsda_default_mode>;
/*
* Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
* are muxed in as GPIO, and configured as INPUT PULL DOWN
*/
gpio2 {
gpio2_default_mode: gpio2_default {
default_mux {
function = "gpio";
groups = "gpio2_a_1";
};
default_cfg {
pins = "GPIO2_T9";
input-enable;
bias-pull-down;
};
};
};
gpio4 {
gpio4_default_mode: gpio4_default {
default_mux {
function = "gpio";
groups = "gpio4_a_1";
};
default_cfg {
pins = "GPIO4_W2";
input-enable;
bias-pull-down;
};
};
};
gpio10 {
gpio10_default_mode: gpio10_default {
default_mux {
function = "gpio";
groups = "gpio10_d_1";
};
default_cfg {
pins = "GPIO10_U17";
input-enable;
bias-pull-down;
};
};
};
gpio11 {
gpio11_default_mode: gpio11_default {
default_mux {
function = "gpio";
groups = "gpio11_d_1";
};
default_cfg {
pins = "GPIO11_AA18";
input-enable;
bias-pull-down;
};
};
};
gpio12 {
gpio12_default_mode: gpio12_default {
default_mux {
function = "gpio";
groups = "gpio12_d_1";
};
default_cfg {
pins = "GPIO12_U16";
input-enable;
bias-pull-down;
};
};
};
gpio13 {
gpio13_default_mode: gpio13_default {
default_mux {
function = "gpio";
groups = "gpio13_d_1";
};
default_cfg {
pins = "GPIO13_W17";
input-enable;
bias-pull-down;
};
};
};
gpio16 {
gpio16_default_mode: gpio16_default {
default_mux {
function = "gpio";
groups = "gpio16_a_1";
};
default_cfg {
pins = "GPIO16_F15";
input-enable;
bias-pull-down;
};
};
};
gpio24 {
gpio24_default_mode: gpio24_default {
default_mux {
function = "gpio";
groups = "gpio24_a_1";
};
default_cfg {
pins = "GPIO24_T14";
input-enable;
bias-pull-down;
};
};
};
gpio25 {
gpio25_default_mode: gpio25_default {
default_mux {
function = "gpio";
groups = "gpio25_a_1";
};
default_cfg {
pins = "GPIO25_R16";
input-enable;
bias-pull-down;
};
};
};
gpio36 {
gpio36_default_mode: gpio36_default {
default_mux {
function = "gpio";
groups = "gpio36_a_1";
};
default_cfg {
pins = "GPIO36_A17";
input-enable;
bias-pull-down;
};
};
};
gpio37 {
gpio37_default_mode: gpio37_default {
default_mux {
function = "gpio";
groups = "gpio37_a_1";
};
default_cfg {
pins = "GPIO37_E15";
input-enable;
bias-pull-down;
};
};
};
gpio38 {
gpio38_default_mode: gpio38_default {
default_mux {
function = "gpio";
groups = "gpio38_a_1";
};
default_cfg {
pins = "GPIO38_C17";
input-enable;
bias-pull-down;
};
};
};
gpio39 {
gpio39_default_mode: gpio39_default {
default_mux {
function = "gpio";
groups = "gpio39_a_1";
};
default_cfg {
pins = "GPIO39_E16";
input-enable;
bias-pull-down;
};
};
};
gpio42 {
gpio42_default_mode: gpio42_default {
default_mux {
function = "gpio";
groups = "gpio42_a_1";
};
default_cfg {
pins = "GPIO42_U2";
input-enable;
bias-pull-down;
};
};
};
/*
* Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
*/
gpio26 {
gpio26_default_mode: gpio26_default {
default_mux {
function = "gpio";
groups = "gpio26_d_1";
};
default_cfg {
pins = "GPIO26_M16";
output-low;
};
};
};
gpio35 {
gpio35_default_mode: gpio35_default {
default_mux {
function = "gpio";
groups = "gpio35_d_1";
};
default_cfg {
pins = "GPIO35_W15";
output-low;
};
};
};
/*
* This sets up the YCBCR connector pins, i.e. analog video out.
* Set as input with no bias.
*/
ycbcr {
ycbcr_default_mode: ycbcr_default {
default_mux {
function = "ycbcr";
groups = "ycbcr0123_d_1";
};
default_cfg {
pins = "GPIO6_Y18",
"GPIO7_AA20",
"GPIO8_W18",
"GPIO9_AA19";
input-enable;
bias-disable;
};
};
};
/* This sets up the PWM pins 14 and 15 */
pwm {
pwm_default_mode: pwm_default {
default_mux {
function = "pwmout";
groups = "pwmout1_d_1", "pwmout2_d_1";
};
default_cfg {
pins = "GPIO14_F14",
"GPIO15_B17";
input-enable;
bias-pull-down;
};
};
};
/* This sets up audio interface 1 */
adi1 {
adi1_default_mode: adi1_default {
default_mux {
function = "adi1";
groups = "adi1_d_1";
};
default_cfg {
pins = "GPIO17_P5",
"GPIO18_R5",
"GPIO19_U5",
"GPIO20_T5";
input-enable;
bias-pull-down;
};
};
};
/* This sets up the USB UICC pins */
usbuicc {
usbuicc_default_mode: usbuicc_default {
default_mux {
function = "usbuicc";
groups = "usbuicc_d_1";
};
default_cfg {
pins = "GPIO21_H19",
"GPIO22_G20",
"GPIO23_G19";
input-enable;
bias-pull-down;
};
};
};
/* This sets up the microphone pins */
dmic {
dmic_default_mode: dmic_default {
default_mux {
function = "dmic";
groups = "dmic12_d_1",
"dmic34_d_1",
"dmic56_d_1";
};
default_cfg {
pins = "GPIO27_J6",
"GPIO28_K6",
"GPIO29_G6",
"GPIO30_H6",
"GPIO31_F5",
"GPIO32_G5";
input-enable;
bias-pull-down;
};
};
};
extcpena {
extcpena_default_mode: extcpena_default {
default_mux {
function = "extcpena";
groups = "extcpena_d_1";
};
default_cfg {
pins = "GPIO34_R17";
input-enable;
bias-pull-down;
};
};
};
/* Modem I2C setup (SCL and SDA pins) */
modsclsda {
modsclsda_default_mode: modsclsda_default {
default_mux {
function = "modsclsda";
groups = "modsclsda_d_1";
};
default_cfg {
pins = "GPIO40_T19",
"GPIO41_U19";
input-enable;
bias-pull-down;
};
};
};
/*
* Clock output pins associated with regulators.
*/
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
function = "sysclkreq";
groups = "sysclkreq2_d_1";
};
default_cfg {
pins = "GPIO1_T10";
input-enable;
bias-disable;
};
};
sysclkreq2_sleep_mode: sysclkreq2_sleep {
default_mux {
function = "gpio";
groups = "gpio1_a_1";
};
default_cfg {
pins = "GPIO1_T10";
input-enable;
bias-pull-down;
};
};
};
sysclkreq4 {
sysclkreq4_default_mode: sysclkreq4_default {
default_mux {
function = "sysclkreq";
groups = "sysclkreq4_d_1";
};
default_cfg {
pins = "GPIO3_U9";
input-enable;
bias-disable;
};
};
sysclkreq4_sleep_mode: sysclkreq4_sleep {
default_mux {
function = "gpio";
groups = "gpio3_a_1";
};
default_cfg {
pins = "GPIO3_U9";
input-enable;
bias-pull-down;
};
};
};
};
/*
* Charging is not working on the HREF unless an actual battery is
* mounted, most HREFs have a DC cable in to the "battery power"
* which means this will only be cofusing. So do not enable charging
* of the HREFs.
*/
ab8500_fg {
status = "disabled";
};
ab8500_btemp {
status = "disabled";
};
ab8500_charger {
status = "disabled";
};
ab8500_chargalg {
status = "disabled";
};
};
};
};
};
&codec {
assigned-clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
assigned-clock-parents = <&ab8500_clock AB8500_SYSCLK_ULP>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
href_codec_playback: endpoint {
remote-endpoint = <&href_msp1_endpoint>;
bitclock-master;
frame-master;
dai-tdm-slot-num = <16>;
dai-tdm-slot-width = <16>;
dai-tdm-slot-tx-mask = <0 1 0 1>;
};
};
port@1 {
reg = <1>;
href_codec_capture: endpoint {
remote-endpoint = <&href_msp3_endpoint>;
bitclock-master;
frame-master;
dai-tdm-slot-num = <16>;
dai-tdm-slot-width = <16>;
dai-tdm-slot-rx-mask = <1>;
};
};
};
};
&msp1 {
href_msp1_port: port {
href_msp1_endpoint: endpoint {
continuous-clock;
remote-endpoint = <&href_codec_playback>;
dai-format = "dsp_a";
dai-tdm-slot-num = <16>;
dai-tdm-slot-width = <16>;
dai-tdm-slot-tx-mask = <0 1 0 1>;
};
};
};
&msp3 {
href_msp3_port: port {
href_msp3_endpoint: endpoint {
continuous-clock;
remote-endpoint = <&href_codec_capture>;
dai-format = "dsp_a";
dai-tdm-slot-num = <16>;
dai-tdm-slot-width = <16>;
dai-tdm-slot-rx-mask = <1>;
};
};
};