Linux v6.6.1 - comedi
# SPDX-License-Identifier: GPL-2.0
menuconfig COMEDI
tristate "Data acquisition support (comedi)"
help
Enable support for a wide range of data acquisition devices
for Linux.
if COMEDI
config COMEDI_DEBUG
bool "Comedi debugging"
help
This is an option for use by developers; most people should
say N here. This enables comedi core and driver debugging.
config COMEDI_DEFAULT_BUF_SIZE_KB
int "Comedi default initial asynchronous buffer size in KiB"
default "2048"
help
This is the default asynchronous buffer size which is used for
commands running in the background in kernel space. This
defaults to 2048 KiB of memory so that a 16 channel card
running at 10 kHz has of 2-4 seconds of buffer.
config COMEDI_DEFAULT_BUF_MAXSIZE_KB
int "Comedi default maximum asynchronous buffer size in KiB"
default "20480"
help
This is the default maximum asynchronous buffer size which can
be requested by a userspace program without root privileges.
This is set to 20480 KiB so that a fast I/O card with 16
channels running at 100 kHz has 2-4 seconds of buffer.
menuconfig COMEDI_MISC_DRIVERS
bool "Comedi misc drivers"
help
Enable comedi misc drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about misc non-hardware comedi drivers.
if COMEDI_MISC_DRIVERS
config COMEDI_BOND
tristate "Comedi device bonding support"
select COMEDI_KCOMEDILIB
help
Enable support for a driver to 'bond' (merge) multiple subdevices
from multiple devices together as one.
Currently, it only handles digital I/O subdevices.
To compile this driver as a module, choose M here: the module will be
called comedi_bond.
config COMEDI_TEST
tristate "Fake waveform generator support"
help
Enable support for the fake waveform generator.
This driver is mainly for testing purposes, but can also be used to
generate sample waveforms on systems that don't have data acquisition
hardware.
To compile this driver as a module, choose M here: the module will be
called comedi_test.
config COMEDI_PARPORT
tristate "Parallel port support"
help
Enable support for the standard parallel port.
A cheap and easy way to get a few more digital I/O lines. Steal
additional parallel ports from old computers or your neighbors'
computers.
To compile this driver as a module, choose M here: the module will be
called comedi_parport.
config COMEDI_SSV_DNP
tristate "SSV Embedded Systems DIL/Net-PC support"
depends on X86_32 || COMPILE_TEST
help
Enable support for SSV Embedded Systems DIL/Net-PC
To compile this driver as a module, choose M here: the module will be
called ssv_dnp.
endif # COMEDI_MISC_DRIVERS
menuconfig COMEDI_ISA_DRIVERS
bool "Comedi ISA and PC/104 drivers"
help
Enable comedi ISA and PC/104 drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about ISA and PC/104 comedi drivers.
if COMEDI_ISA_DRIVERS
config COMEDI_PCL711
tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
select COMEDI_8254
help
Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
To compile this driver as a module, choose M here: the module will be
called pcl711.
config COMEDI_PCL724
tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
select COMEDI_8255
help
Enable support for ISA and PC/104 based 8255 digital i/o boards. This
driver provides a legacy comedi driver wrapper for the generic 8255
support driver.
Supported boards include:
Advantech PCL-724 24 channels
Advantech PCL-722 144 (or 96) channels
Advantech PCL-731 48 channels
ADlink ACL-7122 144 (or 96) channels
ADlink ACL-7124 24 channels
ADlink PET-48DIO 48 channels
WinSystems PCM-IO48 48 channels (PC/104)
Diamond Systems ONYX-MM-DIO 48 channels (PC/104)
To compile this driver as a module, choose M here: the module will be
called pcl724.
config COMEDI_PCL726
tristate "Advantech PCL-726 and compatible ISA card support"
help
Enable support for Advantech PCL-726 and compatible ISA cards.
To compile this driver as a module, choose M here: the module will be
called pcl726.
config COMEDI_PCL730
tristate "Simple Digital I/O board support (8-bit ports)"
help
Enable support for various simple ISA or PC/104 Digital I/O boards.
These boards all use 8-bit I/O ports.
Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out
ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out
ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out
Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out
Advantech PCL-725 iso - 8 in/8 out
ICP P8R8-DIO iso - 8 in/8 out
ADlink ACL-7225b iso - 16 in/16 out
ICP P16R16-DIO iso - 16 in/16 out
Advantech PCL-733 iso - 32 in
Advantech PCL-734 iso - 32 out
Diamond Systems OPMM-1616-XT iso - 16 in/16 out
Diamond Systems PEARL-MM-P iso - 16 out
Diamond Systems IR104-PBF iso - 20 in/20 out
To compile this driver as a module, choose M here: the module will be
called pcl730.
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
select COMEDI_ISADMA if ISA_DMA_API
select COMEDI_8254
help
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
To compile this driver as a module, choose M here: the module will be
called pcl812.
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
select COMEDI_ISADMA if ISA_DMA_API
select COMEDI_8254
help
Enable support for Advantech PCL-814 and PCL-816 ISA cards
To compile this driver as a module, choose M here: the module will be
called pcl816.
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
select COMEDI_ISADMA if ISA_DMA_API
select COMEDI_8254
help
Enable support for Advantech PCL-818 ISA cards
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
To compile this driver as a module, choose M here: the module will be
called pcl818.
config COMEDI_PCM3724
tristate "Advantech PCM-3724 PC/104 card support"
select COMEDI_8255
help
Enable support for Advantech PCM-3724 PC/104 cards.
To compile this driver as a module, choose M here: the module will be
called pcm3724.
config COMEDI_AMPLC_DIO200_ISA
tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
select COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
PC272E ISA DIO boards
To compile this driver as a module, choose M here: the module will be
called amplc_dio200.
config COMEDI_AMPLC_PC236_ISA
tristate "Amplicon PC36AT DIO board support"
select COMEDI_AMPLC_PC236
help
Enable support for Amplicon PC36AT ISA DIO board.
To compile this driver as a module, choose M here: the module will be
called amplc_pc236.
config COMEDI_AMPLC_PC263_ISA
tristate "Amplicon PC263 relay board support"
help
Enable support for Amplicon PC263 ISA relay board. This board has
16 reed relay output channels.
To compile this driver as a module, choose M here: the module will be
called amplc_pc263.
config COMEDI_RTI800
tristate "Analog Devices RTI-800/815 ISA card support"
help
Enable support for Analog Devices RTI-800/815 ISA cards
To compile this driver as a module, choose M here: the module will be
called rti800.
config COMEDI_RTI802
tristate "Analog Devices RTI-802 ISA card support"
help
Enable support for Analog Devices RTI-802 ISA cards
To compile this driver as a module, choose M here: the module will be
called rti802.
config COMEDI_DAC02
tristate "Keithley Metrabyte DAC02 compatible ISA card support"
help
Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
To compile this driver as a module, choose M here: the module will be
called dac02.
config COMEDI_DAS16M1
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
select COMEDI_8254
select COMEDI_8255
help
Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
To compile this driver as a module, choose M here: the module will be
called das16m1.
config COMEDI_DAS08_ISA
tristate "DAS-08 compatible ISA and PC/104 card support"
select COMEDI_DAS08
help
Enable support for Keithley Metrabyte/ComputerBoards DAS08
and compatible ISA and PC/104 cards:
Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
To compile this driver as a module, choose M here: the module will be
called das08_isa.
config COMEDI_DAS16
tristate "DAS-16 compatible ISA and PC/104 card support"
select COMEDI_ISADMA if ISA_DMA_API
select COMEDI_8254
select COMEDI_8255
help
Enable support for Keithley Metrabyte/ComputerBoards DAS16
and compatible ISA and PC/104 cards:
Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
CIO-DAS1602/16, CIO-DAS16/330
To compile this driver as a module, choose M here: the module will be
called das16.
config COMEDI_DAS800
tristate "DAS800 and compatible ISA card support"
select COMEDI_8254
help
Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
Keithley Metrabyte DAS-800, DAS-801, DAS-802
Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
CIO-DAS802/16
To compile this driver as a module, choose M here: the module will be
called das800.
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
select COMEDI_ISADMA if ISA_DMA_API
select COMEDI_8254
help
Enable support for DAS1800 and compatible ISA cards
Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
DAS-1802AO
To compile this driver as a module, choose M here: the module will be
called das1800.
config COMEDI_DAS6402
tristate "DAS6402 and compatible ISA card support"
select COMEDI_8254
help
Enable support for DAS6402 and compatible ISA cards
Computerboards, Keithley Metrabyte DAS6402 and compatibles
To compile this driver as a module, choose M here: the module will be
called das6402.
config COMEDI_DT2801
tristate "Data Translation DT2801 ISA card support"
help
Enable support for Data Translation DT2801 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2801.
config COMEDI_DT2811
tristate "Data Translation DT2811 ISA card support"
help
Enable support for Data Translation DT2811 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2811.
config COMEDI_DT2814
tristate "Data Translation DT2814 ISA card support"
help
Enable support for Data Translation DT2814 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2814.
config COMEDI_DT2815
tristate "Data Translation DT2815 ISA card support"
help
Enable support for Data Translation DT2815 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2815.
config COMEDI_DT2817
tristate "Data Translation DT2817 ISA card support"
help
Enable support for Data Translation DT2817 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2817.
config COMEDI_DT282X
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select COMEDI_ISADMA if ISA_DMA_API
help
Enable support for Data Translation DT2821 series including DT-EZ
DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
To compile this driver as a module, choose M here: the module will be
called dt282x.
config COMEDI_DMM32AT
tristate "Diamond Systems MM-32-AT PC/104 board support"
select COMEDI_8255
help
Enable support for Diamond Systems MM-32-AT PC/104 boards
To compile this driver as a module, choose M here: the module will be
called dmm32at.
config COMEDI_FL512
tristate "FL512 ISA card support"
help
Enable support for FL512 ISA card
To compile this driver as a module, choose M here: the module will be
called fl512.
config COMEDI_AIO_AIO12_8
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
select COMEDI_8254
select COMEDI_8255
help
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
To compile this driver as a module, choose M here: the module will be
called aio_aio12_8.
config COMEDI_AIO_IIRO_16
tristate "I/O Products PC/104 IIRO16 Board support"
help
Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
Input Board
To compile this driver as a module, choose M here: the module will be
called aio_iiro_16.
config COMEDI_II_PCI20KC
tristate "Intelligent Instruments PCI-20001C carrier support"
depends on HAS_IOMEM
help
Enable support for Intelligent Instruments PCI-20001C carrier
PCI-20001, PCI-20006 and PCI-20341
To compile this driver as a module, choose M here: the module will be
called ii_pci20kc.
config COMEDI_C6XDIGIO
tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
help
Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
card
To compile this driver as a module, choose M here: the module will be
called c6xdigio.
config COMEDI_MPC624
tristate "Micro/sys MPC-624 PC/104 board support"
help
Enable support for Micro/sys MPC-624 PC/104 board
To compile this driver as a module, choose M here: the module will be
called mpc624.
config COMEDI_ADQ12B
tristate "MicroAxial ADQ12-B data acquisition and control card support"
help
Enable MicroAxial ADQ12-B daq and control card support.
To compile this driver as a module, choose M here: the module will be
called adq12b.
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
select COMEDI_ISADMA if ISA_DMA_API
select COMEDI_8254
help
Enable support for National Instruments AT-A2150 cards
To compile this driver as a module, choose M here: the module will be
called ni_at_a2150.
config COMEDI_NI_AT_AO
tristate "NI AT-AO-6/10 EISA card support"
select COMEDI_8254
help
Enable support for National Instruments AT-AO-6/10 cards
To compile this driver as a module, choose M here: the module will be
called ni_at_ao.
config COMEDI_NI_ATMIO
tristate "NI AT-MIO E series ISA-PNP card support"
select COMEDI_8255
select COMEDI_NI_TIO
help
Enable support for National Instruments AT-MIO E series cards
National Instruments AT-MIO-16E-1 (ni_atmio),
AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
To compile this driver as a module, choose M here: the module will be
called ni_atmio.
config COMEDI_NI_ATMIO16D
tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
select COMEDI_8255
help
Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
To compile this driver as a module, choose M here: the module will be
called ni_atmio16d.
config COMEDI_NI_LABPC_ISA
tristate "NI Lab-PC and compatibles ISA support"
select COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC and compatibles
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
not yet been added to the driver.
To compile this driver as a module, choose M here: the module will be
called ni_labpc.
config COMEDI_PCMAD
tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
help
Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
To compile this driver as a module, choose M here: the module will be
called pcmad.
config COMEDI_PCMDA12
tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
help
Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
Note that the board is not ISA-PNP capable and thus needs the I/O
port comedi_config parameter.
To compile this driver as a module, choose M here: the module will be
called pcmda12.
config COMEDI_PCMMIO
tristate "Winsystems PCM-MIO PC/104 board support"
help
Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
To compile this driver as a module, choose M here: the module will be
called pcmmio.
config COMEDI_PCMUIO
tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
help
Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
To compile this driver as a module, choose M here: the module will be
called pcmuio.
config COMEDI_MULTIQ3
tristate "Quanser Consulting MultiQ-3 ISA card support"
help
Enable support for Quanser Consulting MultiQ-3 ISA cards
To compile this driver as a module, choose M here: the module will be
called multiq3.
config COMEDI_S526
tristate "Sensoray s526 support"
help
Enable support for Sensoray s526
To compile this driver as a module, choose M here: the module will be
called s526.
endif # COMEDI_ISA_DRIVERS
menuconfig COMEDI_PCI_DRIVERS
tristate "Comedi PCI drivers"
depends on PCI
help
Enable support for comedi PCI drivers.
To compile this support as a module, choose M here: the module will
be called comedi_pci.
if COMEDI_PCI_DRIVERS
config COMEDI_8255_PCI
tristate "Generic PCI based 8255 digital i/o board support"
select COMEDI_8255
help
Enable support for PCI based 8255 digital i/o boards. This driver
provides a PCI wrapper around the generic 8255 driver.
Supported boards:
ADlink - PCI-7224, PCI-7248, and PCI-7296
Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
PCI-DIO96H
National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
PCI-6503B, PCI-6503X, and PXI-6503
To compile this driver as a module, choose M here: the module will
be called 8255_pci.
config COMEDI_ADDI_WATCHDOG
tristate
help
Provides support for the watchdog subdevice found on many ADDI-DATA
boards. This module will be automatically selected when needed. The
module will be called addi_watchdog.
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
help
Enable support for ADDI-DATA APCI_1032 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1032.
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
help
Enable support for ADDI-DATA APCI_1500 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1500.
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI-1016/1516/2016 support"
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
These are 16 channel, optically isolated, digital I/O boards. The 1516
and 2016 boards also have a watchdog for resetting the outputs to "0".
To compile this driver as a module, choose M here: the module will be
called addi_apci_1516.
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_1564 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1564.
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
help
Enable support for ADDI-DATA APCI_16xx cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_16xx.
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2032 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_2032.
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2200 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_2200.
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3120/3001 support"
depends on HAS_DMA
help
Enable support for ADDI-DATA APCI_3120/3001 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3120.
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
help
Enable support for ADDI-DATA APCI_3501 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3501.
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
help
Enable support for ADDI-DATA APCI_3xxx cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3xxx.
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
help
Enable support for ADLink PCI-6208A cards
To compile this driver as a module, choose M here: the module will be
called adl_pci6208.
config COMEDI_ADL_PCI7X3X
tristate "ADLink PCI-723X/743X isolated digital i/o board support"
help
Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
Supported boards include the 32-channel PCI-7230 (16 in/16 out),
PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
To compile this driver as a module, choose M here: the module will be
called adl_pci7x3x.
config COMEDI_ADL_PCI8164
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
help
Enable support for ADlink PCI-8164 4 Axes Motion Control board
To compile this driver as a module, choose M here: the module will be
called adl_pci8164.
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
select COMEDI_8254
help
Enable support for ADlink PCI9111 cards
To compile this driver as a module, choose M here: the module will be
called adl_pci9111.
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
depends on HAS_DMA
select COMEDI_8254
help
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
To compile this driver as a module, choose M here: the module will be
called adl_pci9118.
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x and PCI-1731 support"
select COMEDI_8254
help
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
PCI-1713 and PCI-1731
To compile this driver as a module, choose M here: the module will be
called adv_pci1710.
config COMEDI_ADV_PCI1720
tristate "Advantech PCI-1720 support"
help
Enable support for Advantech PCI-1720 Analog Output board.
To compile this driver as a module, choose M here: the module will be
called adv_pci1720.
config COMEDI_ADV_PCI1723
tristate "Advantech PCI-1723 support"
help
Enable support for Advantech PCI-1723 cards
To compile this driver as a module, choose M here: the module will be
called adv_pci1723.
config COMEDI_ADV_PCI1724
tristate "Advantech PCI-1724U support"
help
Enable support for Advantech PCI-1724U cards. These are 32-channel
analog output cards with voltage and current loop output ranges and
14-bit resolution.
To compile this driver as a module, choose M here: the module will be
called adv_pci1724.
config COMEDI_ADV_PCI1760
tristate "Advantech PCI-1760 support"
help
Enable support for Advantech PCI-1760 board.
To compile this driver as a module, choose M here: the module will be
called adv_pci1760.
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
select COMEDI_8254
select COMEDI_8255
help
Enable support for Advantech PCI DIO cards
PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
PCI-1761 and PCI-1762
To compile this driver as a module, choose M here: the module will be
called adv_pci_dio.
config COMEDI_AMPLC_DIO200_PCI
tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
select COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
and PCIe296 DIO boards.
To compile this driver as a module, choose M here: the module will be
called amplc_dio200_pci.
config COMEDI_AMPLC_PC236_PCI
tristate "Amplicon PCI236 DIO board support"
select COMEDI_AMPLC_PC236
help
Enable support for Amplicon PCI236 DIO board.
To compile this driver as a module, choose M here: the module will be
called amplc_pci236.
config COMEDI_AMPLC_PC263_PCI
tristate "Amplicon PCI263 relay board support"
help
Enable support for Amplicon PCI263 relay board. This is a PCI board
with 16 reed relay output channels.
To compile this driver as a module, choose M here: the module will be
called amplc_pci263.
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
select COMEDI_8254
help
Enable support for Amplicon PCI224 and PCI234 AO boards
To compile this driver as a module, choose M here: the module will be
called amplc_pci224.
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
select COMEDI_8254
select COMEDI_8255
help
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
boards
To compile this driver as a module, choose M here: the module will be
called amplc_pci230.
config COMEDI_CONTEC_PCI_DIO
tristate "Contec PIO1616L digital I/O board support"
help
Enable support for the Contec PIO1616L digital I/O board
To compile this driver as a module, choose M here: the module will be
called contec_pci_dio.
config COMEDI_DAS08_PCI
tristate "DAS-08 PCI support"
select COMEDI_DAS08
help
Enable support for PCI DAS-08 cards.
To compile this driver as a module, choose M here: the module will be
called das08_pci.
config COMEDI_DT3000
tristate "Data Translation DT3000 series support"
help
Enable support for Data Translation DT3000 series
DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
DT3004-200
To compile this driver as a module, choose M here: the module will be
called dt3000.
config COMEDI_DYNA_PCI10XX
tristate "Dynalog PCI DAQ series support"
help
Enable support for Dynalog PCI DAQ series
PCI-1050
To compile this driver as a module, choose M here: the module will be
called dyna_pci10xx.
config COMEDI_GSC_HPDI
tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
help
Enable support for General Standards Corporation high speed parallel
digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
Only receive mode works, transmit not supported.
To compile this driver as a module, choose M here: the module will be
called gsc_hpdi.
config COMEDI_MF6X4
tristate "Humusoft MF634 and MF624 DAQ Card support"
help
This driver supports both Humusoft MF634 and MF624 Data acquisition
cards. The legacy Humusoft MF614 card is not supported.
config COMEDI_ICP_MULTI
tristate "Inova ICP_MULTI support"
help
Enable support for Inova ICP_MULTI card
To compile this driver as a module, choose M here: the module will be
called icp_multi.
config COMEDI_DAQBOARD2000
tristate "IOtech DAQboard/2000 support"
select COMEDI_8255
help
Enable support for the IOtech DAQboard/2000
To compile this driver as a module, choose M here: the module will be
called daqboard2000.
config COMEDI_JR3_PCI
tristate "JR3/PCI force sensor board support"
help
Enable support for JR3/PCI force sensor boards
To compile this driver as a module, choose M here: the module will be
called jr3_pci.
config COMEDI_KE_COUNTER
tristate "Kolter-Electronic PCI Counter 1 card support"
help
Enable support for Kolter-Electronic PCI Counter 1 cards
To compile this driver as a module, choose M here: the module will be
called ke_counter.
config COMEDI_CB_PCIDAS64
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
60xx, and 4020 series with the PLX 9080 PCI controller
To compile this driver as a module, choose M here: the module will be
called cb_pcidas64.
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
select COMEDI_8254
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
and PCI_DAS1002.
To compile this driver as a module, choose M here: the module will be
called cb_pcidas.
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
PCI-DDA04/16 and PCI-DDA02/16
To compile this driver as a module, choose M here: the module will be
called cb_pcidda.
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
select COMEDI_8254
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI Migration
series PCIM-DAS1602/16 and PCIe-DAS1602/16.
To compile this driver as a module, choose M here: the module will be
called cb_pcimdas.
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
To compile this driver as a module, choose M here: the module will be
called cb_pcimdda.
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
select COMEDI_8254
help
Enable support for Meilhaus PCI data acquisition cards
ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
To compile this driver as a module, choose M here: the module will be
called me4000.
config COMEDI_ME_DAQ
tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
help
Enable support for Meilhaus PCI data acquisition cards
ME-2000i, ME-2600i and ME-3000vm1
To compile this driver as a module, choose M here: the module will be
called me_daq.
config COMEDI_NI_6527
tristate "NI 6527 support"
help
Enable support for the National Instruments 6527 PCI card
To compile this driver as a module, choose M here: the module will be
called ni_6527.
config COMEDI_NI_65XX
tristate "NI 65xx static dio PCI card support"
help
Enable support for National Instruments 65xx static dio boards.
Supported devices: National Instruments PCI-6509 (ni_65xx),
PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
To compile this driver as a module, choose M here: the module will be
called ni_65xx.
config COMEDI_NI_660X
tristate "NI 660x counter/timer PCI card support"
depends on HAS_DMA
select COMEDI_NI_TIOCMD
help
Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
To compile this driver as a module, choose M here: the module will be
called ni_660x.
config COMEDI_NI_670X
tristate "NI 670x PCI card support"
help
Enable support for National Instruments PCI-6703 and PCI-6704
To compile this driver as a module, choose M here: the module will be
called ni_670x.
config COMEDI_NI_LABPC_PCI
tristate "NI Lab-PC PCI-1200 support"
select COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC PCI-1200.
To compile this driver as a module, choose M here: the module will be
called ni_labpc_pci.
config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
depends on HAS_DMA
select COMEDI_MITE
select COMEDI_8255
help
Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
PCI-6533 and PCI-6534
To compile this driver as a module, choose M here: the module will be
called ni_pcidio.
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
depends on HAS_DMA
select COMEDI_NI_TIOCMD
select COMEDI_8255
help
Enable support for National Instruments PCI-MIO-E series and M series
(all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
To compile this driver as a module, choose M here: the module will be
called ni_pcimio.
config COMEDI_RTD520
tristate "Real Time Devices PCI4520/DM7520 support"
select COMEDI_8254
help
Enable support for Real Time Devices PCI4520/DM7520
To compile this driver as a module, choose M here: the module will be
called rtd520.
config COMEDI_S626
tristate "Sensoray 626 support"
help
Enable support for Sensoray 626
To compile this driver as a module, choose M here: the module will be
called s626.
config COMEDI_MITE
depends on HAS_DMA
tristate
config COMEDI_NI_TIOCMD
tristate
depends on HAS_DMA
select COMEDI_NI_TIO
select COMEDI_MITE
endif # COMEDI_PCI_DRIVERS
menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
depends on PCMCIA
help
Enable support for comedi PCMCIA drivers.
To compile this support as a module, choose M here: the module will
be called comedi_pcmcia.
if COMEDI_PCMCIA_DRIVERS
config COMEDI_CB_DAS16_CS
tristate "CB DAS16 series PCMCIA support"
select COMEDI_8254
help
Enable support for the ComputerBoards/MeasurementComputing PCMCIA
cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
To compile this driver as a module, choose M here: the module will be
called cb_das16_cs.
config COMEDI_DAS08_CS
tristate "CB DAS08 PCMCIA support"
select COMEDI_DAS08
help
Enable support for the ComputerBoards/MeasurementComputing DAS-08
PCMCIA card
To compile this driver as a module, choose M here: the module will be
called das08_cs.
config COMEDI_NI_DAQ_700_CS
tristate "NI DAQCard-700 PCMCIA support"
help
Enable support for the National Instruments PCMCIA DAQCard-700 DIO
To compile this driver as a module, choose M here: the module will be
called ni_daq_700.
config COMEDI_NI_DAQ_DIO24_CS
tristate "NI DAQ-Card DIO-24 PCMCIA support"
select COMEDI_8255
help
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
To compile this driver as a module, choose M here: the module will be
called ni_daq_dio24.
config COMEDI_NI_LABPC_CS
tristate "NI DAQCard-1200 PCMCIA support"
select COMEDI_NI_LABPC
help
Enable support for the National Instruments PCMCIA DAQCard-1200
To compile this driver as a module, choose M here: the module will be
called ni_labpc_cs.
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
select COMEDI_NI_TIO
select COMEDI_8255
help
Enable support for the National Instruments PCMCIA DAQCard E series
DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
and DAQCard-6036E
To compile this driver as a module, choose M here: the module will be
called ni_mio_cs.
config COMEDI_QUATECH_DAQP_CS
tristate "Quatech DAQP PCMCIA data capture card support"
help
Enable support for the Quatech DAQP PCMCIA data capture cards
DAQP-208 and DAQP-308
To compile this driver as a module, choose M here: the module will be
called quatech_daqp_cs.
endif # COMEDI_PCMCIA_DRIVERS
menuconfig COMEDI_USB_DRIVERS
tristate "Comedi USB drivers"
depends on USB
help
Enable support for comedi USB drivers.
To compile this support as a module, choose M here: the module will
be called comedi_usb.
if COMEDI_USB_DRIVERS
config COMEDI_DT9812
tristate "DataTranslation DT9812 USB module support"
help
Enable support for the Data Translation DT9812 USB module
To compile this driver as a module, choose M here: the module will be
called dt9812.
config COMEDI_NI_USB6501
tristate "NI USB-6501 support"
help
Enable support for the National Instruments USB-6501 module.
The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
provides 24 digital I/O lines channels and one 32-bit counter.
To compile this driver as a module, choose M here: the module will be
called ni_usb6501.
config COMEDI_USBDUX
tristate "ITL USB-DUX-D support"
help
Enable support for the Incite Technology Ltd USB-DUX-D Board
To compile this driver as a module, choose M here: the module will be
called usbdux.
config COMEDI_USBDUXFAST
tristate "ITL USB-DUXfast support"
help
Enable support for the Incite Technology Ltd USB-DUXfast Board
To compile this driver as a module, choose M here: the module will be
called usbduxfast.
config COMEDI_USBDUXSIGMA
tristate "ITL USB-DUXsigma support"
help
Enable support for the Incite Technology Ltd USB-DUXsigma Board
To compile this driver as a module, choose M here: the module will be
called usbduxsigma.
config COMEDI_VMK80XX
tristate "Velleman VM110/VM140 USB Board support"
help
Build the Velleman USB Board Low-Level Driver supporting the
K8055/K8061 aka VM110/VM140 devices
To compile this driver as a module, choose M here: the module will be
called vmk80xx.
endif # COMEDI_USB_DRIVERS
config COMEDI_8254
tristate
config COMEDI_8255
tristate
config COMEDI_8255_SA
tristate "Standalone 8255 support"
select COMEDI_8255
help
Enable support for 8255 digital I/O as a standalone driver.
You should enable compilation this driver if you plan to use a board
that has an 8255 chip at a known I/O base address and there are no
other Comedi drivers for the board.
Note that Comedi drivers for most multi-function boards incorporating
an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255
boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
module.
To compile this driver as a module, choose M here: the module will be
called 8255.
config COMEDI_KCOMEDILIB
tristate "Comedi kcomedilib"
help
Build the kcomedilib.
This is a kernel module used to open and manipulate Comedi devices
from within kernel code. It is currently only used by the
comedi_bond driver, and its functionality has been stripped down to
the needs of that driver, so is currently not very useful for
anything else.
To compile kcomedilib as a module, choose M here: the module will be
called kcomedilib.
config COMEDI_AMPLC_DIO200
select COMEDI_8254
tristate
config COMEDI_AMPLC_PC236
tristate
select COMEDI_8255
config COMEDI_DAS08
tristate
select COMEDI_8254
select COMEDI_8255
config COMEDI_ISADMA
tristate
config COMEDI_NI_LABPC
tristate
select COMEDI_8254
select COMEDI_8255
config COMEDI_NI_LABPC_ISADMA
tristate
default COMEDI_NI_LABPC
depends on COMEDI_NI_LABPC_ISA != n
depends on ISA_DMA_API
select COMEDI_ISADMA
config COMEDI_NI_TIO
tristate
select COMEDI_NI_ROUTING
config COMEDI_NI_ROUTING
tristate
config COMEDI_TESTS
tristate "Comedi unit tests"
help
Enable comedi unit-test modules to be built.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about comedi unit-test modules.
if COMEDI_TESTS
config COMEDI_TESTS_EXAMPLE
tristate "Comedi example unit-test module"
help
Enable support for an example unit-test module. This is just a
silly example to be used as a basis for writing other unit-test
modules.
To compile this as a module, choose M here: the module will be called
comedi_example_test.
config COMEDI_TESTS_NI_ROUTES
tristate "NI routing unit-test module"
select COMEDI_NI_ROUTING
help
Enable support for a unit-test module to test the signal routing
code used by comedi drivers for various National Instruments cards.
To compile this as a module, choose M here: the module will be called
ni_routes_test.
endif # COMEDI_TESTS
endif # COMEDI