# SPDX-License-Identifier: GPL-2.0-only menu "Distributed Switch Architecture drivers" depends on NET_DSA source "drivers/net/dsa/b53/Kconfig" config NET_DSA_BCM_SF2 tristate "Broadcom Starfighter 2 Ethernet switch support" depends on HAS_IOMEM select NET_DSA_TAG_BRCM select FIXED_PHY select BCM7XXX_PHY select MDIO_BCM_UNIMAC select B53 help This enables support for the Broadcom Starfighter 2 Ethernet switch chips. config NET_DSA_LOOP tristate "DSA mock-up Ethernet switch chip support" select NET_DSA_TAG_NONE select FIXED_PHY help This enables support for a fake mock-up switch chip which exercises the DSA APIs. source "drivers/net/dsa/hirschmann/Kconfig" config NET_DSA_LANTIQ_GSWIP tristate "Lantiq / Intel GSWIP" depends on HAS_IOMEM select NET_DSA_TAG_GSWIP help This enables support for the Lantiq / Intel GSWIP 2.1 found in the xrx200 / VR9 SoC. config NET_DSA_MT7530 tristate "MediaTek MT7530 and MT7531 Ethernet switch support" select NET_DSA_TAG_MTK imply NET_DSA_MT7530_MDIO imply NET_DSA_MT7530_MMIO help This enables support for the MediaTek MT7530 and MT7531 Ethernet switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are supported as well. config NET_DSA_MT7530_MDIO tristate "MediaTek MT7530 MDIO interface driver" depends on NET_DSA_MT7530 imply MEDIATEK_GE_PHY select PCS_MTK_LYNXI help This enables support for the MediaTek MT7530 and MT7531 switch chips which are connected via MDIO, as well as multi-chip module MT7530 which can be found in the MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs. config NET_DSA_MT7530_MMIO tristate "MediaTek MT7530 MMIO interface driver" depends on NET_DSA_MT7530 depends on HAS_IOMEM imply MEDIATEK_GE_SOC_PHY help This enables support for the built-in Ethernet switch found in the MediaTek MT7988 SoC. The switch is a similar design as MT7531, but the switch registers are directly mapped into the SoCs register space rather than being accessible via MDIO. config NET_DSA_MV88E6060 tristate "Marvell 88E6060 ethernet switch chip support" select NET_DSA_TAG_TRAILER help This enables support for the Marvell 88E6060 ethernet switch chip. source "drivers/net/dsa/microchip/Kconfig" source "drivers/net/dsa/mv88e6xxx/Kconfig" source "drivers/net/dsa/ocelot/Kconfig" source "drivers/net/dsa/qca/Kconfig" source "drivers/net/dsa/sja1105/Kconfig" source "drivers/net/dsa/xrs700x/Kconfig" source "drivers/net/dsa/realtek/Kconfig" config NET_DSA_RZN1_A5PSW tristate "Renesas RZ/N1 A5PSW Ethernet switch support" depends on OF && ARCH_RZN1 select NET_DSA_TAG_RZN1_A5PSW select PCS_RZN1_MIIC help This driver supports the A5PSW switch, which is embedded in Renesas RZ/N1 SoC. config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 select REGMAP help This enables support for the Microchip LAN9303/LAN9354 3 port ethernet switch chips. config NET_DSA_SMSC_LAN9303_I2C tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" depends on I2C depends on VLAN_8021Q || VLAN_8021Q=n select NET_DSA_SMSC_LAN9303 select REGMAP_I2C help Enable access functions if the SMSC/Microchip LAN9303 is configured for I2C managed mode. config NET_DSA_SMSC_LAN9303_MDIO tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode" select NET_DSA_SMSC_LAN9303 depends on VLAN_8021Q || VLAN_8021Q=n help Enable access functions if the Microchip LAN9303/LAN9354 is configured for MDIO managed mode. config NET_DSA_VITESSE_VSC73XX tristate select NET_DSA_TAG_NONE select FIXED_PHY select VITESSE_PHY select GPIOLIB help This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches. config NET_DSA_VITESSE_VSC73XX_SPI tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" depends on SPI select NET_DSA_VITESSE_VSC73XX help This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches in SPI managed mode. config NET_DSA_VITESSE_VSC73XX_PLATFORM tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" depends on HAS_IOMEM select NET_DSA_VITESSE_VSC73XX help This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches, connected over a CPU-attached address bus and work in memory-mapped I/O mode. endmenu