Directory Files
.. 1002
File Size
.aten.ko.cmd 307 B
.aten.mod.cmd 165 B
.aten.mod.o.cmd 50 kB
.aten.o.cmd 62 kB
.bpck.ko.cmd 307 B
.bpck.mod.cmd 165 B
.bpck.mod.o.cmd 50 kB
.bpck.o.cmd 62 kB
.bpck6.ko.cmd 311 B
.bpck6.mod.cmd 168 B
.bpck6.mod.o.cmd 50 kB
.bpck6.o.cmd 63 kB
.comm.ko.cmd 307 B
.comm.mod.cmd 165 B
.comm.mod.o.cmd 50 kB
.comm.o.cmd 62 kB
.dstr.ko.cmd 307 B
.dstr.mod.cmd 165 B
.dstr.mod.o.cmd 50 kB
.dstr.o.cmd 62 kB
.epat.ko.cmd 307 B
.epat.mod.cmd 165 B
.epat.mod.o.cmd 50 kB
.epat.o.cmd 63 kB
.epia.ko.cmd 307 B
.epia.mod.cmd 165 B
.epia.mod.o.cmd 50 kB
.epia.o.cmd 62 kB
.fit2.ko.cmd 307 B
.fit2.mod.cmd 165 B
.fit2.mod.o.cmd 50 kB
.fit2.o.cmd 62 kB
.fit3.ko.cmd 307 B
.fit3.mod.cmd 165 B
.fit3.mod.o.cmd 50 kB
.fit3.o.cmd 62 kB
.friq.ko.cmd 307 B
.friq.mod.cmd 165 B
.friq.mod.o.cmd 50 kB
.friq.o.cmd 62 kB
.frpw.ko.cmd 307 B
.frpw.mod.cmd 165 B
.frpw.mod.o.cmd 50 kB
.frpw.o.cmd 62 kB
.kbic.ko.cmd 307 B
.kbic.mod.cmd 165 B
.kbic.mod.o.cmd 50 kB
.kbic.o.cmd 62 kB
.ktti.ko.cmd 307 B
.ktti.mod.cmd 165 B
.ktti.mod.o.cmd 50 kB
.ktti.o.cmd 62 kB
.modules.order.cmd 748 B
.on20.ko.cmd 307 B
.on20.mod.cmd 165 B
.on20.mod.o.cmd 50 kB
.on20.o.cmd 62 kB
.on26.ko.cmd 307 B
.on26.mod.cmd 165 B
.on26.mod.o.cmd 50 kB
.on26.o.cmd 62 kB
.pata_parport.ko.cmd 339 B
.pata_parport.mod.cmd 189 B
.pata_parport.mod.o.cmd 50 kB
.pata_parport.o.cmd 63 kB
Kconfig 4.7 kB
Makefile 719 B
aten.c 3.2 kB
aten.ko 65 kB
aten.mod 32 B
aten.mod.c 465 B
aten.mod.o 3.3 kB
aten.o 63 kB
bpck.c 8.8 kB
bpck.ko 186 kB
bpck.mod 32 B
bpck.mod.c 465 B
bpck.mod.o 3.3 kB
bpck.o 185 kB
bpck6.c 13 kB
bpck6.ko 87 kB
bpck6.mod 33 B
bpck6.mod.c 465 B
bpck6.mod.o 3.3 kB
bpck6.o 87 kB
comm.c 4.2 kB
comm.ko 100 kB
comm.mod 32 B
comm.mod.c 465 B
comm.mod.o 3.3 kB
comm.o 98 kB
dstr.c 4.3 kB
dstr.ko 124 kB
dstr.mod 32 B
dstr.mod.c 465 B
dstr.mod.o 3.3 kB
dstr.o 123 kB
epat.c 7.2 kB
epat.ko 148 kB
epat.mod 32 B
epat.mod.c 465 B
epat.mod.o 3.3 kB
epat.o 147 kB
epia.c 6.3 kB
epia.ko 110 kB
epia.mod 32 B
epia.mod.c 465 B
epia.mod.o 3.3 kB
epia.o 109 kB
fit2.c 3.1 kB
fit2.ko 49 kB
fit2.mod 32 B
fit2.mod.c 465 B
fit2.mod.o 3.3 kB
fit2.o 48 kB
fit3.c 4.0 kB
fit3.ko 85 kB
fit3.mod 32 B
fit3.mod.c 465 B
fit3.mod.o 3.3 kB
fit3.o 84 kB
friq.c 5.6 kB
friq.ko 177 kB
friq.mod 32 B
friq.mod.c 465 B
friq.mod.o 3.3 kB
friq.o 176 kB
frpw.c 6.4 kB
frpw.ko 154 kB
frpw.mod 32 B
frpw.mod.c 465 B
frpw.mod.o 3.3 kB
frpw.o 154 kB
kbic.c 6.5 kB
kbic.ko 148 kB
kbic.mod 32 B
kbic.mod.c 465 B
kbic.mod.o 3.3 kB
kbic.o 146 kB
ktti.c 2.7 kB
ktti.ko 57 kB
ktti.mod 32 B
ktti.mod.c 465 B
ktti.mod.o 3.3 kB
ktti.o 56 kB
modules.order 521 B
on20.c 3.0 kB
on20.ko 148 kB
on20.mod 32 B
on20.mod.c 465 B
on20.mod.o 3.3 kB
on20.o 146 kB
on26.c 6.2 kB
on26.ko 331 kB
on26.mod 32 B
on26.mod.c 465 B
on26.mod.o 3.3 kB
on26.o 330 kB
pata_parport.c 21 kB
pata_parport.h 3.3 kB
pata_parport.ko 136 kB
pata_parport.mod 40 B
pata_parport.mod.c 667 B
pata_parport.mod.o 4.8 kB
pata_parport.o 137 kB

Linux v7.4-rc3 - pata_parport

# SPDX-License-Identifier: GPL-2.0

comment "Parallel IDE protocol modules"
	depends on PATA_PARPORT

config PATA_PARPORT_ATEN
	tristate "ATEN EH-100 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the ATEN EH-100 parallel port IDE
	  protocol. This protocol is used in some inexpensive low performance
	  parallel port kits made in Hong Kong.

config PATA_PARPORT_BPCK
	tristate "MicroSolutions backpack (Series 5) protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Micro Solutions BACKPACK
	  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
	  before 1999 were Series 5) Series 5 drives will NOT always have the
	  Series noted on the bottom of the drive. Series 6 drivers will.

	  In other words, if your BACKPACK drive doesn't say "Series 6" on the
	  bottom, enable this option.

config PATA_PARPORT_BPCK6
	tristate "MicroSolutions backpack (Series 6) protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Micro Solutions BACKPACK
	  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
	  after 1999 were Series 6) Series 6 drives will have the Series noted
	  on the bottom of the drive.  Series 5 drivers don't always have it
	  noted.

	  In other words, if your BACKPACK drive says "Series 6" on the
	  bottom, enable this option.

config PATA_PARPORT_COMM
	tristate "DataStor Commuter protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Commuter parallel port IDE
	  protocol from DataStor.

config PATA_PARPORT_DSTR
	tristate "DataStor EP-2000 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the EP-2000 parallel port IDE
	  protocol from DataStor

config PATA_PARPORT_FIT2
	tristate "FIT TD-2000 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the TD-2000 parallel port IDE
	  protocol from Fidelity International Technology. This is a simple
	  (low speed) adapter that is used in some portable hard drives.

config PATA_PARPORT_FIT3
	tristate "FIT TD-3000 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the TD-3000 parallel port IDE
	  protocol from Fidelity International Technology. This protocol is
	  used in newer models of their portable disk, CD-ROM and PD/CD
	  devices.

config PATA_PARPORT_EPAT
	tristate "Shuttle EPAT/EPEZ protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the EPAT parallel port IDE protocol.
	  EPAT is a parallel port IDE adapter manufactured by Shuttle
	  Technology and widely used in devices from major vendors such as
	  Hewlett-Packard, SyQuest, Imation and Avatar.

config PATA_PARPORT_EPATC8
	bool "Support c7/c8 chips"
	depends on PATA_PARPORT_EPAT
	help
	  This option enables support for the newer Shuttle EP1284 (aka c7 and
	  c8) chip. You need this if you are using any recent Imation SuperDisk
	  (LS-120) drive.

config PATA_PARPORT_EPIA
	tristate "Shuttle EPIA protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the (obsolete) EPIA parallel port
	  IDE protocol from Shuttle Technology. This adapter can still be
	  found in some no-name kits.

config PATA_PARPORT_FRIQ
	tristate "Freecom IQ ASIC-2 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for version 2 of the Freecom IQ parallel
	  port IDE adapter.  This adapter is used by the Maxell Superdisk
	  drive.

config PATA_PARPORT_FRPW
	tristate "FreeCom power protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Freecom power parallel port IDE
	  protocol.

config PATA_PARPORT_KBIC
	tristate "KingByte KBIC-951A/971A protocols"
	depends on PATA_PARPORT
	help
	  This option enables support for the KBIC-951A and KBIC-971A parallel
	  port IDE protocols from KingByte Information Corp. KingByte's
	  adapters appear in many no-name portable disk and CD-ROM products,
	  especially in Europe.

config PATA_PARPORT_KTTI
	tristate "KT PHd protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the "PHd" parallel port IDE protocol
	  from KT Technology. This is a simple (low speed) adapter that is
	  used in some 2.5" portable hard drives.

config PATA_PARPORT_ON20
	tristate "OnSpec 90c20 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the (obsolete) 90c20 parallel port
	  IDE protocol from OnSpec (often marketed under the ValuStore brand
	  name).

config PATA_PARPORT_ON26
	tristate "OnSpec 90c26 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the 90c26 parallel port IDE protocol
	  from OnSpec Electronics (often marketed under the ValuStore brand
	  name).