// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2025, Thundercomm All rights reserved.
 */

/dts-v1/;

/* PM7250B is configured to use SID8/9 */
#define PM7250B_SID 8
#define PM7250B_SID1 9

#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "kodiak.dtsi"
#include "pm7250b.dtsi"
#include "pm7325.dtsi"
#include "pm8350c.dtsi" /* PM7350C */
#include "pmk8350.dtsi" /* PMK7325 */

/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
/delete-node/ &ipa_fw_mem;
/delete-node/ &mpss_mem;
/delete-node/ &remoteproc_mpss;
/delete-node/ &remoteproc_wpss;
/delete-node/ &rmtfs_mem;
/delete-node/ &video_mem;
/delete-node/ &wifi;
/delete-node/ &wlan_ce_mem;
/delete-node/ &wlan_fw_mem;
/delete-node/ &wpss_mem;
/delete-node/ &xbl_mem;

/ {
	model = "Thundercomm RUBIK Pi 3";
	compatible = "thundercomm,rubikpi3", "qcom,qcm6490";
	chassis-type = "embedded";

	aliases {
		serial0 = &uart5;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&kypd_vol_up_n>;
		pinctrl-names = "default";

		key-volume-up {
			label = "Volume Up";
			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
			linux,can-disable;
		};
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&lt9611_out>;
			};
		};
	};

	pmic-glink {
		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";

		#address-cells = <1>;
		#size-cells = <0>;
		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss_in: endpoint {
						remote-endpoint = <&usb_dp_qmpphy_out>;
					};
				};

				port@2 {
					reg = <2>;

					pmic_glink_sbu_in: endpoint {
						remote-endpoint = <&usb1_sbu_mux>;
					};
				};
			};
		};
	};

	fan0: pwm-fan {
		compatible = "pwm-fan";

		/* cooling level (0, 1, 2, 3) : (0% duty, 25% duty, 50% duty, 100% duty) */
		cooling-levels = <0 64 128 255>;
		#cooling-cells = <2>;
		pwms = <&pm8350c_pwm 3 1000000>;

		pinctrl-0 = <&fan_pwm_out_default>;
		pinctrl-names = "default";
	};

	vreg_eth_1v8: regulator-eth-1v8 {
		compatible = "regulator-fixed";

		regulator-name = "vreg_eth_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <50000>;

		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb_eth_power>;
		pinctrl-names = "default";

		vin-supply = <&vreg_usbhub_pwr_1v8>;
	};

	vreg_lt9611_3v3: regulator-lt9611-3v3 {
		compatible = "regulator-fixed";

		regulator-name = "vreg_lt9611_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&lt9611_vcc_pin>;
		pinctrl-names = "default";
	};

	vreg_m2_1v8: regulator-m2-1v8 {
		compatible = "regulator-fixed";

		regulator-name = "vreg_m2_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <50000>;

		gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&m2_vcc_pin>;
		pinctrl-names = "default";

		regulator-always-on;
		regulator-boot-on;
	};

	vreg_usbhub_pwr_1v8: regulator-usbhub-pwr-1v8 {
		compatible = "regulator-fixed";

		regulator-name = "vreg_usbhub_pwr_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <50000>;

		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usbhub_power>;
		pinctrl-names = "default";

		regulator-always-on;
	};

	vreg_usbhub_rest_1v8: regulator-usbhub-rest-1v8 {
		compatible = "regulator-fixed";

		regulator-name = "vreg_usbhub_rest_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-enable-ramp-delay = <50000>;
		regulator-max-microvolt = <1800000>;

		gpio = <&tlmm 136 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usbhub_rest>;
		pinctrl-names = "default";

		vin-supply = <&vreg_eth_1v8>;

		regulator-always-on;
		regulator-boot-on;
	};

	vreg_vcc3v3_output: regulator-vcc3v3-output {
		compatible = "regulator-fixed";

		regulator-name = "vcc3v3_output";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 14 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&vcc3v3_output_en>;
		pinctrl-names = "default";

		regulator-always-on;
	};

	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";

		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;
	};

	vreg_wifi_1v8: regulator-wifi-1v8 {
		compatible = "regulator-fixed";

		regulator-name = "vreg_wifi_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-enable-ramp-delay = <50000>;

		gpio = <&tlmm 125 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&wifi_reset_active>,
			    <&wifi_host_wake>,
			    <&wifi_power_on>;
		pinctrl-names = "default";

		regulator-always-on;
	};

	reserved-memory {
		xbl_mem: xbl@80700000 {
			reg = <0x0 0x80700000 0x0 0x100000>;
			no-map;
		};

		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
			reg = <0x0 0x81800000 0x0 0x1e00000>;
			no-map;
		};

		camera_mem: camera@84300000 {
			reg = <0x0 0x84300000 0x0 0x500000>;
			no-map;
		};

		adsp_mem: adsp@86100000 {
			reg = <0x0 0x86100000 0x0 0x2800000>;
			no-map;
		};

		cdsp_mem: cdsp@88900000 {
			reg = <0x0 0x88900000 0x0 0x1e00000>;
			no-map;
		};

		video_mem: video@8a700000 {
			reg = <0x0 0x8a700000 0x0 0x700000>;
			no-map;
		};

		cvp_mem: cvp@8ae00000 {
			reg = <0x0 0x8ae00000 0x0 0x500000>;
			no-map;
		};

		gpu_microcode_mem: gpu-microcode@8b31a000 {
			reg = <0x0 0x8b31a000 0x0 0x2000>;
			no-map;
		};

		tz_stat_mem: tz-stat@c0000000 {
			reg = <0x0 0xc0000000 0x0 0x100000>;
			no-map;
		};

		tags_mem: tags@c0100000 {
			reg = <0x0 0xc0100000 0x0 0x1200000>;
			no-map;
		};

		qtee_mem: qtee@c1300000 {
			reg = <0x0 0xc1300000 0x0 0x500000>;
			no-map;
		};

		trusted_apps_mem: trusted-apps@c1800000 {
			reg = <0x0 0xc1800000 0x0 0x1c00000>;
			no-map;
		};

		debug_vm_mem: debug-vm@d0600000 {
			reg = <0x0 0xd0600000 0x0 0x100000>;
			no-map;
		};
	};

	thermal-zones {
		quiet-thermal {
			thermal-sensors = <&pmk8350_adc_tm 1>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		sdm-skin-thermal {
			thermal-sensors = <&pmk8350_adc_tm 3>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		xo-thermal {
			thermal-sensors = <&pmk8350_adc_tm 0>;

			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};
	};

	usb1-sbu-mux {
		compatible = "pericom,pi3usb102", "gpio-sbu-mux";

		enable-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
		select-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;

		pinctrl-0 = <&usb1_sbu_default>;
		pinctrl-names = "default";

		mode-switch;
		orientation-switch;

		port {
			usb1_sbu_mux: endpoint {
				remote-endpoint = <&pmic_glink_sbu_in>;
			};
		};
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm7325-rpmh-regulators";
		qcom,pmic-id = "b";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
		vdd-l2-l7-supply = <&vreg_bob_3p296>;
		vdd-l3-supply = <&vreg_s2b_0p876>;
		vdd-l5-supply = <&vreg_s2b_0p876>;
		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
		vdd-l8-supply = <&vreg_s7b_0p972>;
		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
		vdd-l13-supply = <&vreg_s7b_0p972>;
		vdd-l14-l16-supply = <&vreg_s8b_1p272>;

		vreg_s1b_1p872: smps1 {
			regulator-name = "vreg_s1b_1p872";
			regulator-min-microvolt = <1840000>;
			regulator-max-microvolt = <2040000>;
		};

		vreg_s2b_0p876: smps2 {
			regulator-name = "vreg_s2b_0p876";
			regulator-min-microvolt = <570070>;
			regulator-max-microvolt = <1050000>;
		};

		vreg_s7b_0p972: smps7 {
			regulator-name = "vreg_s7b_0p972";
			regulator-min-microvolt = <535000>;
			regulator-max-microvolt = <1120000>;
		};

		vreg_s8b_1p272: smps8 {
			regulator-name = "vreg_s8b_1p272";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1500000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
		};

		vreg_l1b_0p912: ldo1 {
			regulator-name = "vreg_l1b_0p912";
			regulator-min-microvolt = <825000>;
			regulator-max-microvolt = <925000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2b_3p072: ldo2 {
			regulator-name = "vreg_l2b_3p072";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3b_0p504: ldo3 {
			regulator-name = "vreg_l3b_0p504";
			regulator-min-microvolt = <312000>;
			regulator-max-microvolt = <910000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4b_0p752: ldo4 {
			regulator-name = "vreg_l4b_0p752";
			regulator-min-microvolt = <752000>;
			regulator-max-microvolt = <820000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		reg_l5b_0p752: ldo5 {
			regulator-name = "reg_l5b_0p752";
			regulator-min-microvolt = <552000>;
			regulator-max-microvolt = <832000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6b_1p2: ldo6 {
			regulator-name = "vreg_l6b_1p2";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1260000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b_2p952: ldo7 {
			regulator-name = "vreg_l7b_2p952";
			regulator-min-microvolt = <2952000>;
			regulator-max-microvolt = <2952000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8b_0p904: ldo8 {
			regulator-name = "vreg_l8b_0p904";
			regulator-min-microvolt = <870000>;
			regulator-max-microvolt = <970000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b_1p2: ldo9 {
			regulator-name = "vreg_l9b_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11b_1p504: ldo11 {
			regulator-name = "vreg_l11b_1p504";
			regulator-min-microvolt = <1504000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12b_0p751: ldo12 {
			regulator-name = "vreg_l12b_0p751";
			regulator-min-microvolt = <751000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13b_0p53: ldo13 {
			regulator-name = "vreg_l13b_0p53";
			regulator-min-microvolt = <530000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14b_1p08: ldo14 {
			regulator-name = "vreg_l14b_1p08";
			regulator-min-microvolt = <1080000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15b_0p765: ldo15 {
			regulator-name = "vreg_l15b_0p765";
			regulator-min-microvolt = <765000>;
			regulator-max-microvolt = <1020000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16b_1p1: ldo16 {
			regulator-name = "vreg_l16b_1p1";
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b_1p7: ldo17 {
			regulator-name = "vreg_l17b_1p7";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <1900000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18b_1p8: ldo18 {
			regulator-name = "vreg_l18b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l19b_1p8: ldo19 {
			regulator-name = "vreg_l19b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8350c-rpmh-regulators";
		qcom,pmic-id = "c";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-s9-supply = <&vph_pwr>;
		vdd-s10-supply = <&vph_pwr>;
		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
		vdd-l10-supply = <&vreg_s7b_0p972>;
		vdd-bob-supply = <&vph_pwr>;

		vreg_s1c_2p19: smps1 {
			regulator-name = "vreg_s1c_2p19";
			regulator-min-microvolt = <2190000>;
			regulator-max-microvolt = <2210000>;
		};

		vreg_s2c_0p752: smps2 {
			regulator-name = "vreg_s2c_0p752";
			regulator-min-microvolt = <750000>;
			regulator-max-microvolt = <800000>;
		};

		vreg_s5c_0p752: smps5 {
			regulator-name = "vreg_s5c_0p752";
			regulator-min-microvolt = <465000>;
			regulator-max-microvolt = <1050000>;
		};

		vreg_s7c_0p752: smps7 {
			regulator-name = "vreg_s7c_0p752";
			regulator-min-microvolt = <465000>;
			regulator-max-microvolt = <800000>;
		};

		vreg_s9c_1p084: smps9 {
			regulator-name = "vreg_s9c_1p084";
			regulator-min-microvolt = <1010000>;
			regulator-max-microvolt = <1170000>;
		};

		vreg_l1c_1p8: ldo1 {
			regulator-name = "vreg_l1c_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1980000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2c_1p62: ldo2 {
			regulator-name = "vreg_l2c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <1980000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3c_2p8: ldo3 {
			regulator-name = "vreg_l3c_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3540000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4c_1p62: ldo4 {
			regulator-name = "vreg_l4c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5c_1p62: ldo5 {
			regulator-name = "vreg_l5c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6c_2p96: ldo6 {
			regulator-name = "vreg_l6c_2p96";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7c_3p0: ldo7 {
			regulator-name = "vreg_l7c_3p0";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8c_1p62: ldo8 {
			regulator-name = "vreg_l8c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c_2p96: ldo9 {
			regulator-name = "vreg_l9c_2p96";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10c_0p88: ldo10 {
			regulator-name = "vreg_l10c_0p88";
			regulator-min-microvolt = <720000>;
			regulator-max-microvolt = <1050000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11c_2p8: ldo11 {
			regulator-name = "vreg_l11c_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12c_1p65: ldo12 {
			regulator-name = "vreg_l12c_1p65";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13c_2p7: ldo13 {
			regulator-name = "vreg_l13c_2p7";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob_3p296: bob {
			regulator-name = "vreg_bob_3p296";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3960000>;
		};
	};
};

&gcc {
	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
			   <GCC_MSS_CFG_AHB_CLK>,
			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
			   <GCC_MSS_OFFLINE_AXI_CLK>,
			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
			   <GCC_MSS_SNOC_AXI_CLK>,
			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
			   <GCC_QSPI_CORE_CLK>,
			   <GCC_QSPI_CORE_CLK_SRC>,
			   <GCC_SEC_CTRL_CLK_SRC>,
			   <GCC_WPSS_AHB_BDG_MST_CLK>,
			   <GCC_WPSS_AHB_CLK>,
			   <GCC_WPSS_RSCP_CLK>;
};

&gpi_dma0 {
	status = "okay";
};

&gpi_dma1 {
	status = "okay";
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/qcs6490/a660_zap.mbn";
};

/* Pin 3, 5 in 40-pin connector */
&i2c1 {
	status = "okay";
};

&i2c9 {
	clock-frequency = <400000>;

	status = "okay";

	lt9611_codec: hdmi-bridge@39 {
		compatible = "lontium,lt9611";
		reg = <0x39>;

		interrupts-extended = <&tlmm 20 IRQ_TYPE_EDGE_FALLING>;
		reset-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;

		vdd-supply = <&vreg_lt9611_3v3>;
		vcc-supply = <&vreg_lt9611_3v3>;

		pinctrl-0 = <&lt9611_irq_pin>,
			    <&lt9611_rst_pin>;
		pinctrl-names = "default";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@1 {
				reg = <1>;

				lt9611_b: endpoint {
					remote-endpoint = <&mdss_dsi0_out>;
				};
			};

			port@2 {
				reg = <2>;

				lt9611_out: endpoint {
					remote-endpoint = <&hdmi_con>;
				};
			};
		};
	};
};

&ipa {
	/delete-property/ memory-region;
};

&lpass_audiocc {
	compatible = "qcom,qcm6490-lpassaudiocc";
	/delete-property/ power-domains;
};

&mdss {
	status = "okay";
};

&mdss_dp {
	status = "okay";
};

&mdss_dp_out {
	data-lanes = <0 1>;
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;

	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};

&mdss_dsi {
	vdda-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&mdss_dsi0_out {
	remote-endpoint = <&lt9611_b>;
	data-lanes = <0 1 2 3>;
};

&mdss_dsi_phy {
	vdds-supply = <&vreg_l10c_0p88>;

	status = "okay";
};

&pcie0 {
	pinctrl-0 = <&pcie0_clkreq_n>,
		    <&pcie0_reset_n>,
		    <&pcie0_wake_n>;
	pinctrl-names = "default";

	status = "okay";
};

&pcie0_phy {
	vdda-phy-supply = <&vreg_l10c_0p88>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&pcie0_port {
	reset-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
};

&pcie1 {
	pinctrl-0 = <&pcie1_clkreq_n>,
		    <&pcie1_reset_n>,
		    <&pcie1_wake_n>;
	pinctrl-names = "default";

	status = "okay";
};

&pcie1_phy {
	vdda-phy-supply = <&vreg_l10c_0p88>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&pcie1_port0 {
	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};

&pm7325_gpios {
	kypd_vol_up_n: kypd-vol-up-n-state {
		pins = "gpio6";
		function = PMIC_GPIO_FUNC_NORMAL;
		power-source = <1>;
		bias-pull-up;
		input-enable;
	};
};

&pm7325_temp_alarm {
	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
	io-channel-names = "thermal";
};

&pmk8350_adc_tm {
	status = "okay";

	xo-therm@0 {
		reg = <0>;
		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	quiet-therm@1 {
		reg = <1>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	sdm-skin-therm@3 {
		reg = <3>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};
};

&pm8350c_pwm {
	status = "okay";

	multi-led {
		color = <LED_COLOR_ID_RGB>;
		function = LED_FUNCTION_INDICATOR;

		#address-cells = <1>;
		#size-cells = <0>;

		led@1 {
			reg = <1>;
			color = <LED_COLOR_ID_RED>;
		};

		led@2 {
			reg = <2>;
			color = <LED_COLOR_ID_GREEN>;
		};

		led@3 {
			reg = <3>;
			color = <LED_COLOR_ID_BLUE>;
		};
	};
};

&pmk8350_rtc {
	allow-set-time;

	status = "okay";
};

&pmk8350_vadc {
	channel@3 {
		reg = <PMK8350_ADC7_DIE_TEMP>;
		label = "pmk8350_die_temp";
		qcom,pre-scaling = <1 1>;
	};

	channel@44 {
		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
		label = "xo_therm";
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		qcom,ratiometric;
	};

	channel@103 {
		reg = <PM7325_ADC7_DIE_TEMP>;
		label = "pm7325_die_temp";
		qcom,pre-scaling = <1 1>;
	};

	channel@144 {
		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_quiet_therm";
	};

	channel@146 {
		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "pm7325_sdm_skin_therm";
	};
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;

	status = "okay";
};

&qupv3_id_0 {
	firmware-name = "qcom/qcm6490/qupv3fw.elf";

	status = "okay";
};

&qupv3_id_1 {
	firmware-name = "qcom/qcm6490/qupv3fw.elf";

	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/qcs6490/Thundercomm/RubikPi3/adsp.mbn";

	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/qcs6490/cdsp.mbn";

	status = "okay";
};

/* WIFI part of the AP6256 connected with SDIO */
&sdhc_2 {
	vmmc-supply = <&vreg_l9c_2p96>;
	vqmmc-supply = <&vreg_l6c_2p96>;

	non-removable;
	keep-power-in-suspend;
	/delete-property/ cd-gpios;

	status = "okay";
};

/* Pin 19, 21, 23, 24 in 40-pin connector */
&spi12 {
	status = "okay";
};

&thermal_zones {
	cpu0-thermal {
		trips {
			cpu_tepid: cpu-tepid {
				temperature = <65000>;
				hysteresis = <5000>;
				type = "active";
			};

			cpu_warm: cpu-warm {
				temperature = <80000>;
				hysteresis = <5000>;
				type = "active";
			};
		};

		cooling-maps {
			map-cpu-tepid {
				cooling-device = <&fan0 1 1>;
				trip = <&cpu_tepid>;
			};

			map-cpu-warm {
				cooling-device = <&fan0 2 2>;
				trip = <&cpu_warm>;
			};

			map-cpu-hot {
				cooling-device = <&fan0 3 3>;
				trip = <&cpu0_alert0>;
			};
		};
	};
};

/* Pin 8, 10 in 40-pin connector */
&uart2 {
	status = "okay";
};

&uart5 {
	status = "okay";
};

/* BT part of the AP6256 connected with UART */
&uart7 {
	/delete-property/ interrupts;
	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
	pinctrl-1 = <&qup_uart7_sleep_cts>,
		    <&qup_uart7_sleep_rts>,
		    <&qup_uart7_sleep_tx>,
		    <&qup_uart7_sleep_rx>;
	pinctrl-names = "default",
			"sleep";

	status = "okay";

	bluetooth {
		compatible = "brcm,bcm4345c5";
		clocks = <&sleep_clk>;
		clock-names = "lpo";
		device-wakeup-gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
		host-wakeup-gpios = <&tlmm 137 GPIO_ACTIVE_HIGH>;
		shutdown-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&bt_device_wake>,
			    <&bt_host_wake>,
			    <&bt_reset>;
		pinctrl-names = "default";
		vbat-supply = <&vreg_wifi_1v8>;
		vddio-supply = <&vreg_wifi_1v8>;
		max-speed = <3000000>;
	};
};

&usb_1 {
	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
	vdda-pll-supply = <&vreg_l10c_0p88>;
	vdda33-supply = <&vreg_l2b_3p072>;
	vdda18-supply = <&vreg_l1c_1p8>;

	status = "okay";
};

&usb_1_qmpphy {
	vdda-phy-supply = <&vreg_l1b_0p912>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&usb_2 {
	dr_mode = "host";

	status = "okay";
};

&usb_2_hsphy {
	vdda-pll-supply = <&vreg_l10c_0p88>;
	vdda18-supply = <&vreg_l1c_1p8>;
	vdda33-supply = <&vreg_l2b_3p072>;

	status = "okay";
};

&usb_dp_qmpphy_out {
	remote-endpoint = <&pmic_glink_ss_in>;
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
	vcc-supply = <&vreg_l7b_2p952>;
	vcc-max-microamp = <800000>;
	vccq-supply = <&vreg_l9b_1p2>;
	vccq-max-microamp = <900000>;
	vccq2-supply = <&vreg_l9b_1p2>;
	vccq2-max-microamp = <900000>;

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vreg_l10c_0p88>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&venus {
	status = "okay";
};

/* PINCTRL - additions to nodes defined in kodiak.dtsi */
&pcie0_clkreq_n {
	bias-pull-up;
	drive-strength = <8>;
};

&pcie1_clkreq_n {
	bias-pull-up;
	drive-strength = <8>;
};

&pm8350c_gpios {
	fan_pwm_out_default: fan-pwm-out-default-state {
		pins = "gpio8";
		function = "func1";
		power-source = <1>;
		drive-push-pull;
		output-high;
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
	};
};

&qup_uart7_cts {
	/*
	 * Configure a bias-bus-hold on CTS to lower power
	 * usage when Bluetooth is turned off. Bus hold will
	 * maintain a low power state regardless of whether
	 * the Bluetooth module drives the pin in either
	 * direction or leaves the pin fully unpowered.
	 */
	bias-bus-hold;
};

&qup_uart7_rts {
	/* We'll drive RTS, so no pull */
	bias-disable;
	drive-strength = <2>;
};

&qup_uart7_rx {
	/*
	 * Configure a pull-up on RX. This is needed to avoid
	 * garbage data when the TX pin of the Bluetooth module is
	 * in tri-state (module powered off or not driving the
	 * signal yet).
	 */
	bias-pull-up;
};

&qup_uart7_tx {
	/* We'll drive TX, so no pull */
	bias-disable;
	drive-strength = <2>;
};

&sdc2_clk {
	bias-disable;
	drive-strength = <16>;
};

&sdc2_cmd {
	bias-pull-up;
	drive-strength = <10>;
};

&sdc2_data {
	bias-pull-up;
	drive-strength = <10>;
};

&tlmm {
	pcie1_reset_n: pcie1-reset-n-state {
		pins = "gpio2";
		function = "gpio";
		drive-strength = <8>;
		output-low;
		bias-disable;
	};

	pcie1_wake_n: pcie1-wake-n-state {
		pins = "gpio3";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};

	usb_eth_power: usb-eth-power-state {
		pins = "gpio7";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	vcc3v3_output_en: vcc3v3-output-en-state {
		pins = "gpio14";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	wifi_reset_active: wifi-reset-active-state {
		pins = "gpio16";
		function = "gpio";
		drive-strength = <8>;
		output-high;
		bias-disable;
	};

	bt_reset: bt-reset-state {
		pins = "gpio17";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	lt9611_irq_pin: lt9611-irq-state {
		pins = "gpio20";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	lt9611_rst_pin: lt9611-rst-state {
		pins = "gpio21";
		function = "gpio";
		drive-strength = <8>;
		output-high;
		input-disable;
	};

	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
		pins = "gpio28";
		function = "gpio";
		/*
		 * Configure a bias-bus-hold on CTS to lower power
		 * usage when Bluetooth is turned off. Bus hold will
		 * maintain a low power state regardless of whether
		 * the Bluetooth module drives the pin in either
		 * direction or leaves the pin fully unpowered.
		 */
		bias-bus-hold;
	};

	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
		pins = "gpio29";
		function = "gpio";
		/*
		 * Configure pull-down on RTS. As RTS is active low
		 * signal, pull it low to indicate the BT SoC that it
		 * can wakeup the system anytime from suspend state by
		 * pulling RX low (by sending wakeup bytes).
		 */
		bias-pull-down;
	};

	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
		pins = "gpio30";
		function = "gpio";
		/*
		 * Configure pull-up on TX when it isn't actively driven
		 * to prevent BT SoC from receiving garbage during sleep.
		 */
		bias-pull-up;
	};

	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
		pins = "gpio31";
		function = "gpio";
		/*
		 * Configure a pull-up on RX. This is needed to avoid
		 * garbage data when the TX pin of the Bluetooth module
		 * is floating which may cause spurious wakeups.
		 */
		bias-pull-up;
	};

	wifi_host_wake: wifi-host-wake-state {
		pins = "gpio38";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	bt_device_wake: bt-device-wake-state {
		pins = "gpio39";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	usb1_sbu_default: usb1-sbu-state {
		sel-pins {
			pins = "gpio52";
			function = "gpio";
			drive-strength = <8>;
			bias-disable;
		};

		oe-n-pins {
			pins = "gpio53";
			function = "gpio";
			drive-strength = <8>;
			output-high;
			bias-disable;
		};
	};

	m2_vcc_pin: m2-vcc-state {
		pins = "gpio56";
		function = "gpio";
		drive-strength = <8>;
		output-high;
		input-disable;
	};

	lt9611_vcc_pin: lt9611-vcc-pin-state {
		pins = "gpio83";
		function = "gpio";
		drive-strength = <8>;
		output-high;
		input-disable;
	};

	usbhub_power: usbhub-power-state {
		pins = "gpio86";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	pcie0_reset_n: pcie0-reset-n-state {
		pins = "gpio87";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	pcie0_wake_n: pcie0-wake-n-state {
		pins = "gpio89";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};

	wifi_power_on: wifi-power-on-state {
		pins = "gpio125";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	usbhub_rest: usbhub-reset-state {
		pins = "gpio136";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};

	bt_host_wake: bt-host-wake-state {
		pins = "gpio137";
		function = "gpio";
		drive-strength = <8>;
		bias-disable;
	};
};