# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/ti,lm3533-leds.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI LM3533 low voltage control banks for individual LEDs
description:
This is part of the TI LM3533 MFD device. It represents four low voltage
control banks for individual LEDs provided by the TI LM3533.
maintainers:
- Svyatoslav Ryhel <clamor95@gmail.com>
allOf:
- $ref: /schemas/leds/common.yaml#
properties:
compatible:
const: ti,lm3533-leds
reg:
description:
Control bank selection (2 = bank C, 3 = bank D, 4 = bank E, 5 = bank F).
minimum: 2
maximum: 5
led-max-microamp:
description: maximum current in uA with a 800 uA step.
minimum: 5000
maximum: 29800
default: 5000
led-sources:
description: |
LVLED associated with this control bank. May be more than 1 source per bank.
0 - LVLED1
1 - LVLED2
2 - LVLED3
3 - LVLED4
4 - LVLED5
minItems: 1
maxItems: 5
items:
maximum: 4
ti,pwm-config-mask:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Control Bank PWM Configuration Register mask that allows to configure
PWM input in Zones 0-4
BIT(0) - PWM Input is enabled
BIT(1) - PWM Input is enabled in Zone 0
BIT(2) - PWM Input is enabled in Zone 1
BIT(3) - PWM Input is enabled in Zone 2
BIT(4) - PWM Input is enabled in Zone 3
BIT(5) - PWM Input is enabled in Zone 4
default: 0
required:
- compatible
- reg
unevaluatedProperties: false
# see ti,lm3533.yaml for an example