// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) Toradex
*
* Toradex Capacitive Touch Display 10.1" V2 connected via Verdin AM62 OLDI
* on carrier boards with a Toradex standard LVDS display connector
*
* https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
* https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include "k3-pinctrl.h"
&{/} {
backlight_pwm2: backlight-pwm2 {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2s_2_d_out_gpio>;
brightness-levels = <0 45 63 88 119 158 203 255>;
default-brightness-level = <4>;
/* Verdin I2S_2_D_OUT as GPIO (SODIMM 46) */
enable-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
/* Verdin PWM_2 (SODIMM 16) */
pwms = <&epwm0 1 6666667 0>;
};
panel-lvds-native {
compatible = "optologic,scx1001511ggc49", "panel-lvds";
backlight = <&backlight_pwm2>;
data-mapping = "vesa-24";
height-mm = <136>;
width-mm = <217>;
panel-timing {
clock-frequency = <64500000>;
hactive = <1280>;
hback-porch = <20>;
hfront-porch = <20>;
hsync-len = <2>;
vactive = <800>;
vback-porch = <5>;
vfront-porch = <5>;
vsync-len = <3>;
de-active = <1>;
hsync-active = <0>;
vsync-active = <0>;
pixelclk-active = <0>;
};
port {
panel_lvds_native_in: endpoint {
remote-endpoint = <&oldi0_out>;
};
};
};
};
&dss {
status = "okay";
};
&dss_ports {
#address-cells = <1>;
#size-cells = <0>;
/* DSS VP1: internal DPI output to OLDIx */
port@0 {
reg = <0>;
dss0_out: endpoint {
remote-endpoint = <&oldi0_in>;
};
};
};
/* Verdin I2C_2_DSI */
&main_i2c2 {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@41 {
compatible = "ilitek,ili251x";
reg = <0x41>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2s_2_d_in_gpio>,
<&pinctrl_i2s_2_sync_gpio>;
/* Verdin I2S_2_SYNC as GPIO (SODIMM 44) */
interrupt-parent = <&main_gpio0>;
interrupts = <37 IRQ_TYPE_EDGE_RISING>;
/* Verdin I2S_2_D_IN as GPIO(SODIMM 48) */
reset-gpios = <&main_gpio0 33 GPIO_ACTIVE_LOW>;
};
};
&main_pmx0 {
pinctrl_i2s_2_d_in_gpio: main-gpio0-33-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0088, PIN_INPUT, 7) /* (L24) GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
>;
};
pinctrl_i2s_2_sync_gpio: main-gpio0-37-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0098, PIN_INPUT, 7) /* (U23) GPMC0_WAIT0.GPIO0_37 */ /* SODIMM 44 */
>;
};
};
&oldi0 {
status = "okay";
};
&oldi0_port0 {
oldi0_in: endpoint {
remote-endpoint = <&dss0_out>;
};
};
&oldi0_port1 {
oldi0_out: endpoint {
remote-endpoint = <&panel_lvds_native_in>;
};
};