/* * Copyright 2015 Chen-Yu Tsai <wens@csie.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /* The SinA31s development board has the SinA31s core board soldered on */ #include "sun6i-a31s-sina31s-core.dtsi" #include <dt-bindings/input/input.h> / { model = "Sinlinx SinA31s Development Board"; compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s"; chosen { stdout-path = "serial0:115200n8"; }; hdmi-connector { compatible = "hdmi-connector"; type = "a"; port { hdmi_con_in: endpoint { remote-endpoint = <&hdmi_out_con>; }; }; }; leds { compatible = "gpio-leds"; led-0 { label = "sina31s:status:usr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ }; }; sound { compatible = "simple-audio-card"; simple-audio-card,name = "On-board SPDIF"; simple-audio-card,cpu { sound-dai = <&spdif>; }; simple-audio-card,codec { sound-dai = <&spdif_out>; }; }; spdif_out: spdif-out { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; }; }; &codec { allwinner,audio-routing = "Line Out", "LINEOUT", "MIC1", "Mic", "Mic", "MBIAS"; status = "okay"; }; &de { status = "okay"; }; &ehci0 { /* USB 2.0 4 port hub IC */ status = "okay"; }; &ehci1 { status = "okay"; }; &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; }; &hdmi { status = "okay"; }; &hdmi_out { hdmi_out_con: endpoint { remote-endpoint = <&hdmi_con_in>; }; }; &ir { pinctrl-names = "default"; pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &lradc { vref-supply = <®_aldo3>; status = "okay"; button-158 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <158730>; }; button-349 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <349206>; }; }; &mdio { phy1: ethernet-phy@1 { reg = <1>; }; }; &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; &ohci1 { status = "okay"; }; ®_dldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; }; &spdif { pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &usb_otg { dr_mode = "peripheral"; status = "okay"; }; &usbphy { status = "okay"; };