// SPDX-License-Identifier: GPL-2.0-only /* Low-level parallel port routines for the Atari builtin port * * Author: Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * * Based on parport_amiga.c. * * The built-in Atari parallel port provides one port at a fixed address * with 8 output data lines (D0 - D7), 1 output control line (STROBE) * and 1 input status line (BUSY) able to cause an interrupt. */ #include <linux/module.h> #include <linux/init.h> #include <linux/parport.h> #include <linux/interrupt.h> #include <asm/setup.h> #include <asm/atarihw.h> #include <asm/irq.h> #include <asm/atariints.h> static struct parport *this_port; static unsigned char parport_atari_read_data(struct parport *p) { unsigned long flags; unsigned char data; local_irq_save(flags); sound_ym.rd_data_reg_sel = 15; data = sound_ym.rd_data_reg_sel; local_irq_restore(flags); return data; } static void parport_atari_write_data(struct parport *p, unsigned char data) { unsigned long flags; local_irq_save(flags); sound_ym.rd_data_reg_sel = 15; sound_ym.wd_data = data; local_irq_restore(flags); } static unsigned char parport_atari_read_control(struct parport *p) { unsigned long flags; unsigned char control = 0; local_irq_save(flags); sound_ym.rd_data_reg_sel = 14; if (!(sound_ym.rd_data_reg_sel & (1 << 5))) control = PARPORT_CONTROL_STROBE; local_irq_restore(flags); return control; } static void parport_atari_write_control(struct parport *p, unsigned char control) { unsigned long flags; local_irq_save(flags); sound_ym.rd_data_reg_sel = 14; if (control & PARPORT_CONTROL_STROBE) sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~(1 << 5); else sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); local_irq_restore(flags); } static unsigned char parport_atari_frob_control(struct parport *p, unsigned char mask, unsigned char val) { unsigned char old = parport_atari_read_control(p); parport_atari_write_control(p, (old & ~mask) ^ val); return old; } static unsigned char parport_atari_read_status(struct parport *p) { return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); } static void parport_atari_init_state(struct pardevice *d, struct parport_state *s) { } static void parport_atari_save_state(struct parport *p, struct parport_state *s) { } static void parport_atari_restore_state(struct parport *p, struct parport_state *s) { } static void parport_atari_enable_irq(struct parport *p) { enable_irq(IRQ_MFP_BUSY); } static void parport_atari_disable_irq(struct parport *p) { disable_irq(IRQ_MFP_BUSY); } static void parport_atari_data_forward(struct parport *p) { unsigned long flags; local_irq_save(flags); /* Soundchip port B as output. */ sound_ym.rd_data_reg_sel = 7; sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x40; local_irq_restore(flags); } static void parport_atari_data_reverse(struct parport *p) { } static struct parport_operations parport_atari_ops = { .write_data = parport_atari_write_data, .read_data = parport_atari_read_data, .write_control = parport_atari_write_control, .read_control = parport_atari_read_control, .frob_control = parport_atari_frob_control, .read_status = parport_atari_read_status, .enable_irq = parport_atari_enable_irq, .disable_irq = parport_atari_disable_irq, .data_forward = parport_atari_data_forward, .data_reverse = parport_atari_data_reverse, .init_state = parport_atari_init_state, .save_state = parport_atari_save_state, .restore_state = parport_atari_restore_state, .epp_write_data = parport_ieee1284_epp_write_data, .epp_read_data = parport_ieee1284_epp_read_data, .epp_write_addr = parport_ieee1284_epp_write_addr, .epp_read_addr = parport_ieee1284_epp_read_addr, .ecp_write_data = parport_ieee1284_ecp_write_data, .ecp_read_data = parport_ieee1284_ecp_read_data, .ecp_write_addr = parport_ieee1284_ecp_write_addr, .compat_write_data = parport_ieee1284_write_compat, .nibble_read_data = parport_ieee1284_read_nibble, .byte_read_data = parport_ieee1284_read_byte, .owner = THIS_MODULE, }; static int __init parport_atari_init(void) { struct parport *p; unsigned long flags; if (MACH_IS_ATARI) { local_irq_save(flags); /* Soundchip port A/B as output. */ sound_ym.rd_data_reg_sel = 7; sound_ym.wd_data = (sound_ym.rd_data_reg_sel & 0x3f) | 0xc0; /* STROBE high. */ sound_ym.rd_data_reg_sel = 14; sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); local_irq_restore(flags); /* MFP port I0 as input. */ st_mfp.data_dir &= ~1; /* MFP port I0 interrupt on high->low edge. */ st_mfp.active_edge &= ~1; p = parport_register_port((unsigned long)&sound_ym.wd_data, IRQ_MFP_BUSY, PARPORT_DMA_NONE, &parport_atari_ops); if (!p) return -ENODEV; if (request_irq(IRQ_MFP_BUSY, parport_irq_handler, 0, p->name, p)) { parport_put_port (p); return -ENODEV; } this_port = p; pr_info("%s: Atari built-in port using irq\n", p->name); parport_announce_port (p); return 0; } return -ENODEV; } static void __exit parport_atari_exit(void) { parport_remove_port(this_port); if (this_port->irq != PARPORT_IRQ_NONE) free_irq(IRQ_MFP_BUSY, this_port); parport_put_port(this_port); } MODULE_AUTHOR("Andreas Schwab"); MODULE_DESCRIPTION("Parport Driver for Atari builtin Port"); MODULE_LICENSE("GPL"); module_init(parport_atari_init) module_exit(parport_atari_exit)