# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/cix/cix,sky1-audss-cru.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cix Sky1 audio subsystem clock and reset unit
maintainers:
- Joakim Zhang <joakim.zhang@cixtech.com>
description: |
The Cix Sky1 Audio Subsystem (AUDSS) Clock and Reset Unit (CRU) groups
audio-related clock muxing, gating and block-level software reset control
in a single register block.
A single device node exposes both the clock controller and software reset
lines. The clock driver registers as a platform driver; the reset controller
is registered by an auxiliary driver bound from the clock driver.
Four SoC-level reference clocks listed in clocks/clock-names feed the AUDSS
clock tree. Internal AUDSS clocks are exposed via #clock-cells; indices are
defined in include/dt-bindings/clock/cix,sky1-audss-cru.h.
Block-level software reset indices are exposed via #reset-cells; indices
are defined in include/dt-bindings/reset/cix,sky1-audss-cru.h.
The SoC syscon NoC (or bus) reset is described via resets. The audio
subsystem power domain is described via power-domains.
properties:
compatible:
const: cix,sky1-audss-cru
reg:
maxItems: 1
'#clock-cells':
const: 1
description:
Clock indices are defined in include/dt-bindings/clock/cix,sky1-audss-cru.h.
'#reset-cells':
const: 1
description:
Reset indices are defined in include/dt-bindings/reset/cix,sky1-audss-cru.h.
clocks:
items:
- description: I2S parent clock for sampling rates multiple of 8kHz.
- description: I2S parent clock for sampling rates multiple of 11.025kHz.
- description: Clock feeding most devices in AUDSS (NOC, DSP, SRAM, HDA, DMAC, I2S, and mailbox).
- description: Clock feeding HDA, timer and watchdog, which is a dedicated 48 MHz clock.
clock-names:
items:
- const: x8k
- const: x11k
- const: sys
- const: 48m
power-domains:
maxItems: 1
resets:
maxItems: 1
required:
- compatible
- reg
- '#clock-cells'
- '#reset-cells'
- clocks
- clock-names
- power-domains
- resets
additionalProperties: false
examples:
- |
audss_cru: clock-controller@7110000 {
compatible = "cix,sky1-audss-cru";
reg = <0x7110000 0x10000>;
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&scmi_clk 76>, <&scmi_clk 78>,
<&scmi_clk 70>, <&scmi_clk 71>;
clock-names = "x8k", "x11k", "sys", "48m";
power-domains = <&smc_devpd 0>;
resets = <&s5_syscon 31>;
};