/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
 * Author: Rob Clark <rob@ti.com>
 *         Andy Gross <andy.gross@ti.com>
 */

#ifndef OMAP_DMM_PRIV_H
#define OMAP_DMM_PRIV_H

#define DMM_REVISION          0x000
#define DMM_HWINFO            0x004
#define DMM_LISA_HWINFO       0x008
#define DMM_DMM_SYSCONFIG     0x010
#define DMM_LISA_LOCK         0x01C
#define DMM_LISA_MAP__0       0x040
#define DMM_LISA_MAP__1       0x044
#define DMM_TILER_HWINFO      0x208
#define DMM_TILER_OR__0       0x220
#define DMM_TILER_OR__1       0x224
#define DMM_PAT_HWINFO        0x408
#define DMM_PAT_GEOMETRY      0x40C
#define DMM_PAT_CONFIG        0x410
#define DMM_PAT_VIEW__0       0x420
#define DMM_PAT_VIEW__1       0x424
#define DMM_PAT_VIEW_MAP__0   0x440
#define DMM_PAT_VIEW_MAP_BASE 0x460
#define DMM_PAT_IRQ_EOI       0x478
#define DMM_PAT_IRQSTATUS_RAW 0x480
#define DMM_PAT_IRQSTATUS     0x490
#define DMM_PAT_IRQENABLE_SET 0x4A0
#define DMM_PAT_IRQENABLE_CLR 0x4B0
#define DMM_PAT_STATUS__0     0x4C0
#define DMM_PAT_STATUS__1     0x4C4
#define DMM_PAT_STATUS__2     0x4C8
#define DMM_PAT_STATUS__3     0x4CC
#define DMM_PAT_DESCR__0      0x500
#define DMM_PAT_DESCR__1      0x510
#define DMM_PAT_DESCR__2      0x520
#define DMM_PAT_DESCR__3      0x530
#define DMM_PEG_HWINFO        0x608
#define DMM_PEG_PRIO          0x620
#define DMM_PEG_PRIO_PAT      0x640

#define DMM_IRQSTAT_DST			(1<<0)
#define DMM_IRQSTAT_LST			(1<<1)
#define DMM_IRQSTAT_ERR_INV_DSC		(1<<2)
#define DMM_IRQSTAT_ERR_INV_DATA	(1<<3)
#define DMM_IRQSTAT_ERR_UPD_AREA	(1<<4)
#define DMM_IRQSTAT_ERR_UPD_CTRL	(1<<5)
#define DMM_IRQSTAT_ERR_UPD_DATA	(1<<6)
#define DMM_IRQSTAT_ERR_LUT_MISS	(1<<7)

#define DMM_IRQSTAT_ERR_MASK	(DMM_IRQSTAT_ERR_INV_DSC | \
				DMM_IRQSTAT_ERR_INV_DATA | \
				DMM_IRQSTAT_ERR_UPD_AREA | \
				DMM_IRQSTAT_ERR_UPD_CTRL | \
				DMM_IRQSTAT_ERR_UPD_DATA | \
				DMM_IRQSTAT_ERR_LUT_MISS)

#define DMM_PATSTATUS_READY		(1<<0)
#define DMM_PATSTATUS_VALID		(1<<1)
#define DMM_PATSTATUS_RUN		(1<<2)
#define DMM_PATSTATUS_DONE		(1<<3)
#define DMM_PATSTATUS_LINKED		(1<<4)
#define DMM_PATSTATUS_BYPASSED		(1<<7)
#define DMM_PATSTATUS_ERR_INV_DESCR	(1<<10)
#define DMM_PATSTATUS_ERR_INV_DATA	(1<<11)
#define DMM_PATSTATUS_ERR_UPD_AREA	(1<<12)
#define DMM_PATSTATUS_ERR_UPD_CTRL	(1<<13)
#define DMM_PATSTATUS_ERR_UPD_DATA	(1<<14)
#define DMM_PATSTATUS_ERR_ACCESS	(1<<15)

/* note: don't treat DMM_PATSTATUS_ERR_ACCESS as an error */
#define DMM_PATSTATUS_ERR	(DMM_PATSTATUS_ERR_INV_DESCR | \
				DMM_PATSTATUS_ERR_INV_DATA | \
				DMM_PATSTATUS_ERR_UPD_AREA | \
				DMM_PATSTATUS_ERR_UPD_CTRL | \
				DMM_PATSTATUS_ERR_UPD_DATA)



enum {
	PAT_STATUS,
	PAT_DESCR
};

struct pat_ctrl {
	u32 start:4;
	u32 dir:4;
	u32 lut_id:8;
	u32 sync:12;
	u32 ini:4;
};

struct pat {
	u32 next_pa;
	struct pat_area area;
	struct pat_ctrl ctrl;
	u32 data_pa;
};

#define DMM_FIXED_RETRY_COUNT 1000

/* create refill buffer big enough to refill all slots, plus 3 descriptors..
 * 3 descriptors is probably the worst-case for # of 2d-slices in a 1d area,
 * but I guess you don't hit that worst case at the same time as full area
 * refill
 */
#define DESCR_SIZE 128
#define REFILL_BUFFER_SIZE ((4 * 128 * 256) + (3 * DESCR_SIZE))

/* For OMAP5, a fixed offset is added to all Y coordinates for 1D buffers.
 * This is used in programming to address the upper portion of the LUT
*/
#define OMAP5_LUT_OFFSET       128

struct dmm;

struct dmm_txn {
	void *engine_handle;
	struct tcm *tcm;

	u8 *current_va;
	dma_addr_t current_pa;

	struct pat *last_pat;
};

struct refill_engine {
	int id;
	struct dmm *dmm;
	struct tcm *tcm;

	u8 *refill_va;
	dma_addr_t refill_pa;

	/* only one trans per engine for now */
	struct dmm_txn txn;

	bool async;

	struct completion compl;

	struct list_head idle_node;
};

struct dmm_platform_data {
	u32 cpu_cache_flags;
};

struct dmm {
	struct device *dev;
	dma_addr_t phys_base;
	void __iomem *base;
	int irq;

	struct page *dummy_page;
	dma_addr_t dummy_pa;

	void *refill_va;
	dma_addr_t refill_pa;

	/* refill engines */
	wait_queue_head_t engine_queue;
	struct list_head idle_head;
	struct refill_engine *engines;
	int num_engines;
	atomic_t engine_counter;

	/* container information */
	int container_width;
	int container_height;
	int lut_width;
	int lut_height;
	int num_lut;

	/* array of LUT - TCM containers */
	struct tcm **tcm;

	/* allocation list and lock */
	struct list_head alloc_head;

	const struct dmm_platform_data *plat_data;

	bool dmm_workaround;
	spinlock_t wa_lock;
	u32 *wa_dma_data;
	dma_addr_t wa_dma_handle;
	struct dma_chan *wa_dma_chan;
};

#endif