# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/renesas,r8a779g0-dsc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Renesas R-Car DSC Display Stream Compression

maintainers:
  - Marek Vasut <marek.vasut+renesas@mailbox.org>

description: |
  This binding describes the VESA DSC Display Stream Compression encoder
  embedded in the Renesas R-Car V4H SoC. The encoder supports all DSC1.1
  encoding mechanisms, configurable bits-per-pixel, resolution up to 8k.

properties:
  compatible:
    const: renesas,r8a779g0-dsc

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  interrupts:
    maxItems: 1

  power-domains:
    maxItems: 1

  resets:
    maxItems: 1

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description: R-Car DU input port

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: R-Car DSI output port

    required:
      - port@0
      - port@1

required:
  - compatible
  - reg
  - clocks
  - interrupts
  - power-domains
  - resets
  - ports

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/power/r8a779g0-sysc.h>

    bridge@feb8d000 {
        compatible = "renesas,r8a779g0-dsc";
        reg = <0xfeb8d000 0x400>;
        interrupts = <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&cpg CPG_MOD 2819>;
        power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
        resets = <&cpg 2819>;

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                dsc_in_dsi1: endpoint {
                    remote-endpoint = <&du_out_dsi1>;
                };
            };

            port@1 {
                reg = <1>;
                dsc_out_dsi1: endpoint {
                    remote-endpoint = <&dsi1_in>;
                };
            };
        };
    };
...