// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
*/
/dts-v1/;
#include "k1.dtsi"
#include "k1-opp.dtsi"
#include "k1-pinctrl.dtsi"
/ {
model = "OrangePi R2S";
compatible = "xunlong,orangepi-r2s", "spacemit,k1";
aliases {
i2c2 = &i2c2;
i2c8 = &i2c8;
serial0 = &uart0;
ethernet0 = ð0;
ethernet1 = ð1;
};
chosen {
stdout-path = "serial0";
};
pcie_vcc3v3: regulator-pcie-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "pcie_vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc4v0: regulator-vcc4v0 {
compatible = "regulator-fixed";
regulator-name = "vcc4v0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
};
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio K1_GPIO(126) GPIO_ACTIVE_HIGH>;
regulator-name = "vcc5v0_usb";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&cpu_0 {
cpu-supply = <&buck1_0v9>;
};
&cpu_1 {
cpu-supply = <&buck1_0v9>;
};
&cpu_2 {
cpu-supply = <&buck1_0v9>;
};
&cpu_3 {
cpu-supply = <&buck1_0v9>;
};
&cpu_4 {
cpu-supply = <&buck1_0v9>;
};
&cpu_5 {
cpu-supply = <&buck1_0v9>;
};
&cpu_6 {
cpu-supply = <&buck1_0v9>;
};
&cpu_7 {
cpu-supply = <&buck1_0v9>;
};
&combo_phy {
status = "okay";
};
&emmc {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
ð0 {
nvmem-cells = <&mac_address 0>;
nvmem-cell-names = "mac-address";
phy-handle = <&rgmii0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_cfg>, <&gmac0_clk_ref_cfg>;
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
status = "okay";
mdio-bus {
#address-cells = <0x1>;
#size-cells = <0x0>;
reset-gpios = <&gpio K1_GPIO(110) GPIO_ACTIVE_LOW>;
reset-delay-us = <10000>;
reset-post-delay-us = <100000>;
rgmii0: phy@1 {
reg = <0x1>;
motorcomm,auto-sleep-disabled;
};
};
};
ð1 {
nvmem-cells = <&mac_address 1>;
nvmem-cell-names = "mac-address";
phy-handle = <&rgmii1>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac1_cfg>, <&gmac1_clk_ref_cfg>;
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <250>;
status = "okay";
mdio-bus {
#address-cells = <0x1>;
#size-cells = <0x0>;
reset-gpios = <&gpio K1_GPIO(115) GPIO_ACTIVE_LOW>;
reset-delay-us = <10000>;
reset-post-delay-us = <100000>;
rgmii1: phy@1 {
reg = <0x1>;
motorcomm,auto-sleep-disabled;
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_0_cfg>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
size = <256>;
read-only;
vcc-supply = <&buck3_1v8>;
nvmem-layout {
compatible = "onie,tlv-layout";
mac_address: mac-address {
#nvmem-cell-cells = <1>;
};
num-macs {
};
product-name {
};
};
};
};
&i2c8 {
pinctrl-names = "default";
pinctrl-0 = <&i2c8_cfg>;
status = "okay";
pmic@41 {
compatible = "spacemit,p1";
reg = <0x41>;
interrupts = <64>;
vin1-supply = <&vcc4v0>;
vin2-supply = <&vcc4v0>;
vin3-supply = <&vcc4v0>;
vin4-supply = <&vcc4v0>;
vin5-supply = <&vcc4v0>;
vin6-supply = <&vcc4v0>;
aldoin-supply = <&vcc4v0>;
dldoin1-supply = <&buck5>;
dldoin2-supply = <&buck5>;
regulators {
buck1_0v9: buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck3_1v8: buck3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck4_3v3: buck4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck5: buck5 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck6 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
aldo1_3v3: aldo1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
aldo2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
aldo3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
aldo4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
dldo2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
dldo5 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo6 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
dldo7 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
};
};
};
&pcie1_phy {
pinctrl-names = "default";
pinctrl-0 = <&pcie1_3_cfg>;
status = "okay";
};
&pcie1_port {
phys = <&pcie1_phy>;
vpcie3v3-supply = <&pcie_vcc3v3>;
};
&pcie1 {
status = "okay";
};
&pcie2_phy {
pinctrl-names = "default";
pinctrl-0 = <&pcie2_4_cfg>;
status = "okay";
};
&pcie2_port {
phys = <&pcie2_phy>;
vpcie3v3-supply = <&pcie_vcc3v3>;
};
&pcie2 {
status = "okay";
};
&pdma {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_2_cfg>;
status = "okay";
};
&usbphy2 {
status = "okay";
};
&usb_dwc3 {
dr_mode = "host";
vbus-supply = <&vcc5v0_usb>;
status = "okay";
};