// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Variscite Sonata carrier board for DART-MX8M-PLUS
 *
 * Link: https://variscite.com/carrier-boards/sonata-board/
 *
 * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
 *
 */

/dts-v1/;

#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mp-var-dart.dtsi"

/ {
	model = "Variscite DART-MX8M-PLUS on Sonata-Board";
	compatible = "variscite,var-dart-mx8mp-sonata",
		     "variscite,var-dart-mx8mp",
		     "fsl,imx8mp";

	chosen {
		stdout-path = &uart1;
	};

	gpio-keys {
		compatible = "gpio-keys";

		button-home {
			label = "Home";
			linux,code = <KEY_HOME>;
			gpios = <&pca6408_1 4 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};

		button-up {
			label = "Up";
			linux,code = <KEY_UP>;
			gpios = <&pca6408_1 5 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};

		button-down {
			label = "Down";
			linux,code = <KEY_DOWN>;
			gpios = <&pca6408_1 6 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};

		button-back {
			label = "Back";
			linux,code = <KEY_BACK>;
			gpios = <&pca6408_1 7 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_leds>;

		led-emmc {
			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
			label = "eMMC";
			linux,default-trigger = "mmc2";
		};
	};

	native-hdmi-connector {
		compatible = "hdmi-connector";
		label = "HDMI OUT";
		type = "a";

		port {
			hdmi_in: endpoint {
				remote-endpoint = <&hdmi_tx_out>;
			};
		};
	};

	clk40m: oscillator {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <40000000>;
		clock-output-names = "can_osc";
	};

	pcie0_refclk: pcie0-refclk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <100000000>;
	};

	reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_vmmc_usdhc2>;
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		startup-delay-us = <100>;
		off-on-delay-us = <12000>;
	};

	sound-hdmi {
		compatible = "fsl,imx-audio-hdmi";
		model = "audio-hdmi";
		audio-cpu = <&aud2htx>;
		hdmi-out;
	};

	sound-xcvr {
		compatible = "fsl,imx-audio-card";
		model = "imx-audio-xcvr";

		pri-dai-link {
			link-name = "XCVR PCM";

			cpu {
				sound-dai = <&xcvr>;
			};
		};
	};
};

&aud2htx {
	status = "okay";
};

&ecspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	cs-gpios = <&gpio5  9 GPIO_ACTIVE_LOW>,
		   <&gpio1 12 GPIO_ACTIVE_LOW>;
	status = "okay";

	ads7846: touchscreen@0 {
		compatible = "ti,ads7846";
		reg = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_restouch>;
		interrupt-parent = <&gpio1>;
		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
		spi-max-frequency = <1500000>;
		pendown-gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
		ti,x-min = /bits/ 16 <125>;
		ti,x-max = /bits/ 16 <4008>;
		ti,y-min = /bits/ 16 <282>;
		ti,y-max = /bits/ 16 <3864>;
		ti,x-plate-ohms = /bits/ 16 <180>;
		ti,pressure-max = /bits/ 16 <255>;
		ti,debounce-max = /bits/ 16 <10>;
		ti,debounce-tol = /bits/ 16 <3>;
		ti,debounce-rep = /bits/ 16 <1>;
		ti,settle-delay-usec = /bits/ 16 <150>;
		ti,keep-vref-on;
		wakeup-source;
	};

	can0: can@1 {
		compatible = "microchip,mcp251xfd";
		reg = <1>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can>;
		interrupt-parent = <&gpio1>;
		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
		microchip,rx-int-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
		clocks = <&clk40m>;
		spi-max-frequency = <20000000>;
	};
};

&eqos {
	mdio {
		ethphy1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;
			reset-gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
			reset-assert-us = <10000>;
			reset-deassert-us = <20000>;
			vddio-supply = <&reg_phy_vddio>;

			leds {
				#address-cells = <1>;
				#size-cells = <0>;

				led@0 {
					reg = <0>;
					color = <LED_COLOR_ID_YELLOW>;
					function = LED_FUNCTION_LAN;
					linux,default-trigger = "netdev";
				};

				led@1 {
					reg = <1>;
					color = <LED_COLOR_ID_GREEN>;
					function = LED_FUNCTION_LAN;
					linux,default-trigger = "netdev";
				};
			};
		};
	};
};

&ethphy0 {
	leds {
		#address-cells = <1>;
		#size-cells = <0>;

		led@0 {
			reg = <0>;
			color = <LED_COLOR_ID_YELLOW>;
			function = LED_FUNCTION_LAN;
			linux,default-trigger = "netdev";
		};

		led@1 {
			reg = <1>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			linux,default-trigger = "netdev";
		};
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	/*
	 * The required RGMII TX and RX 2ns delays are implemented directly
	 * in hardware via passive delay elements on the SOM PCB.
	 * No delay configuration is needed in software via PHY driver.
	 */
	phy-mode = "rgmii";
	phy-handle = <&ethphy1>;
	status = "okay";
};

&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "okay";
};

&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	status = "okay";
};

&hdmi_pai {
	status = "okay";
};

&hdmi_pvi {
	status = "okay";
};

&hdmi_tx {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hdmi>;
	status = "okay";

	ports {
		port@1 {
			hdmi_tx_out: endpoint {
				remote-endpoint = <&hdmi_in>;
			};
		};
	};
};

&hdmi_tx_phy {
	status = "okay";
};

&i2c2 {
	clock-frequency = <400000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c2>;
	pinctrl-1 = <&pinctrl_i2c2_gpio>;
	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";

	pca9534: gpio@22 {
		compatible = "nxp,pca9534";
		reg = <0x22>;
		gpio-controller;
		#gpio-cells = <2>;

		eth10g-en-hog {
			gpio-hog;
			gpios = <5 GPIO_ACTIVE_HIGH>;
			output-low;
			line-name = "eth10g_sel";
		};

		pcie2-en-hog {
			gpio-hog;
			gpios = <6 GPIO_ACTIVE_HIGH>;
			output-high;
			line-name = "pcie2_sel";
		};

		/* RGB_SEL
		 * Keep signal low and not floating
		 */
		lvds-brg-enable-hog {
			gpio-hog;
			gpios = <7 GPIO_ACTIVE_HIGH>;
			output-low;
			line-name = "lvds_brg_en";
		};
	};

	/* Capacitive touch controller */
	ft5x06_ts: touchscreen@38 {
		compatible = "edt,edt-ft5206";
		reg = <0x38>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_captouch>;
		reset-gpios = <&pca6408_2 4 GPIO_ACTIVE_LOW>;
		interrupt-parent = <&gpio1>;
		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
		touchscreen-size-x = <800>;
		touchscreen-size-y = <480>;
		touchscreen-inverted-x;
		touchscreen-inverted-y;
		wakeup-source;
	};

	typec@3d {
		compatible = "nxp,ptn5150";
		reg = <0x3d>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_extcon>;
		interrupt-parent = <&gpio1>;
		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;

		port {
			typec_dr_sw: endpoint {
				remote-endpoint = <&usb3_drd_sw>;
			};
		};
	};

	rtc@68 {
		compatible = "dallas,ds1337";
		reg = <0x68>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_rtc>;
		interrupt-parent = <&gpio1>;
		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
		wakeup-source;
	};
};

&i2c3 {
	clock-frequency = <400000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c3>;
	pinctrl-1 = <&pinctrl_i2c3_gpio>;
	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";
};

&i2c4 {
	clock-frequency = <400000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c4>;
	pinctrl-1 = <&pinctrl_i2c4_gpio>;
	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";

	pca6408_1: gpio@20 {
		compatible = "nxp,pcal6408";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pca6408>;
		interrupt-parent = <&gpio1>;
		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
	};

	pca6408_2: gpio@21 {
		compatible = "nxp,pcal6408";
		reg = <0x21>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&gpio1>;
		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
	};

	st33ktpm2xi2c: tpm@2e {
		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
		reg = <0x2e>;
		label = "tpm";
		reset-gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
	};
};

&lcdif3 {
	status = "okay";
};

&pcie {
	reset-gpios = <&pca6408_2 3 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&pcie_phy {
	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
	clocks = <&pcie0_refclk>;
	clock-names = "ref";
	status = "okay";
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&snvs_pwrkey {
	status = "okay";
};

&snvs_rtc {
	status = "disabled";
};

/* Console */
&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

/* Header */
&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

/* Header */
&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	status = "okay";
};

&usb3_0 {
	status = "okay";
};

&usb3_1 {
	status = "okay";
};

&usb_dwc3_0 {
	dr_mode = "otg";
	hnp-disable;
	srp-disable;
	adp-disable;
	usb-role-switch;
	snps,dis-u1-entry-quirk;
	snps,dis-u2-entry-quirk;
	status = "okay";

	port {
		usb3_drd_sw: endpoint {
			remote-endpoint = <&typec_dr_sw>;
		};
	};
};

&usb_dwc3_1 {
	dr_mode = "host";
	status = "okay";
};

&usb3_phy0 {
	fsl,phy-tx-vref-tune-percent = <122>;
	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
	fsl,phy-tx-vboost-level-microvolt = <1156>;
	fsl,phy-comp-dis-tune-percent = <115>;
	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <33>;
	fsl,phy-pcs-tx-swing-full-percent = <100>;
	status = "okay";
};

&usb3_phy1 {
	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
	fsl,phy-tx-vref-tune-percent = <116>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	vqmmc-supply = <&ldo5>;
	bus-width = <4>;
	status = "okay";
};

&xcvr {
	#sound-dai-cells = <0>;
	status = "okay";
};

&iomuxc {
	pinctrl_can: cangrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x1c6
			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x16
		>;
	};

	pinctrl_captouch: captouchgrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x16
		>;
	};

	pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x12
			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x12
			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x12
			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x12
			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x12
		>;
	};

	pinctrl_extcon: extcongrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x10
		>;
	};

	pinctrl_fec: fecgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x1d0
			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x00
			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x00
			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x00
			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x00
			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x00
			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x00
		>;
	};

	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX			0x154
			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX			0x154
		>;
	};

	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX			0x154
			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX			0x154
		>;
	};

	pinctrl_gpio_leds: ledgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0xc6
		>;
	};

	pinctrl_hdmi: hdmigrp {
		fsl,pins = <
			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x10
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c2
			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c2
		>;
	};

	pinctrl_i2c2_gpio: i2c2gpiogrp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x1c2
			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x1c2
		>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c2
			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c2
		>;
	};

	pinctrl_i2c3_gpio: i2c3gpiogrp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x1c2
			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x1c2
		>;
	};

	pinctrl_i2c4: i2c4grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c2
			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c2
		>;
	};

	pinctrl_i2c4_gpio: i2c4gpiogrp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x1c2
			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x1c2
		>;
	};

	pinctrl_pca6408: pca6408grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x1c6
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x116
		>;
	};

	pinctrl_restouch: restouchgrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0xc0
		>;
	};

	pinctrl_rtc: rtcgrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c0
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x40
			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x40
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x40
			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x40
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x40
			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x40
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
		>;
	};

	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
		>;
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
		>;
	};

	pinctrl_vmmc_usdhc2: regvmmc-usdhc2grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x40
		>;
	};

	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
		>;
	};
};